Sm_(0.5)Sr_(0.5)CoO_3阴极氧还原动力学

利用极化、交流阻抗技术考察了担载于La0.9Sr0.1Ga0.8Mg0.2O3(LSGM)电解质上的Sm0.5Sr0.5CoO3-La0.8Sr0.2Ga0.8Mg0.15Co0.05O3(SSC-LSGMC5)复合阴极的氧还原反应动力学.在SSC-LSGMC5阴极氧还原反应的阻抗谱中可以观察到明显的两个半圆.高频环的电导与氧分压无关,低频环的电导正比于氧分压的0.5次方.并且低频环的氧分压级数随着反应温度的降低而减小,可能对应于吸附氧原子的扩散过程.SSC-LSGMC5极化曲线与经典的Butler-Volmer方程吻合.阴、阳极的电荷转移系数均为1左右,交换电流密度的氧分压级数为1/4,对应于电荷转移过程.实验结果显示SSC-LSGMC5上的氧还原反应机制随反应条件的不同而发生变化.     

电沉积表面修饰对染料敏化太阳电池微观性能影响机理研究

为了改善染料敏化太阳电池内电子的传输复合过程, 研究者尝试不同方法制备或改性TiO₂薄膜. 对TiO₂薄膜进行后处理, 在其表面引入一层小颗粒层, 是一种有效的方法并被广泛研究. 通过对TiO₂薄膜不同时间的电沉积表面修饰, 细致研究了表面修饰后染料敏化太阳电池微观性能的变化机制. 采用阳极氧化法在TiCl₃水溶液中对TiO₂薄膜进行电沉积后处理, 将溶液pH值调至2.2, 装置的反应速率由恒电位仪控制. 不同沉积时间电池带边移动以及电子传输复合的动力学过程, 借助强度调制光电流谱(IMPS)/强度调制光电压谱(IMVS)和电化学阻抗谱(EIS)等探测技术表征. 研究表明, 电沉积在TiO₂薄膜表面引入了大量浅能级陷阱态, 以致电势较高时电容随沉积时间延长增加明显. 不同时间的电沉积表面修饰在TiO₂薄膜表面形成了新的小颗粒层并改善了TiO₂颗粒间接触, 在改善电子注入及收集过程的同时, 也有效抑制了内部电子复合. IMPS/IMVS结果表明, 电沉积对动力学过程改善的效果受光强影响明显, 弱光下作用更为突出. 此外, 电池开路电压主要受带边移动及内部复合变化影响, 随沉积时间延长, 表面电荷的增多使TiO₂薄膜带边逐渐正移, 有效改善了光电流却限制了开路电压的提升. 在适合的电沉积时间下, 电沉积表面修饰可以同时改善光电流和光电压.     

电流密度对钙磷沉积层组成和结构的影响(英文)

用X射线衍射、激光拉曼光谱以及等离子体原子发射光谱等技术研究了电化学沉积钙磷陶瓷过程中 ,电流密度对电沉积层组成和结构的影响 .实验表明阴极表面得到的沉积物是几种钙磷盐组成的混合物 ,且其成份随电流密度的改变而发生较大的变化 .在电解液温度为 75℃条件下 ,当控制电流密度较低时 ,沉积层主要由CaHPO4· 2H2 O (DCPD)和Ca8H2 (PO4) 6· 5H2 O (OCP)组成 ;随着电流密度的增加 ,阴极表面逐渐生成Ca3 (PO4) 2 ·nH2 O (TCP)和Ca10 (PO4) 6(OH) 2 (HAP) .当电流密度大于 5mA/cm2 时 ,电沉积层的主要成份为羟基磷灰石 (HAP) .     

Electrosorption of sodium cellulose sulfates with different substitution patterns

Various types of sodium cellulose sulfate (SCS), dissolved in a 1M LiCl solution, were investigated by alternating current (AC)polarography. The SCS samples differed in the degree of substitution (DS), thedistribution of substituents within the anhydroglucose unit (AGU), and alongthechain, due to the method of synthesis. The goal was to study theelectrosorptionbehavior, characterized by the shape of the desorption wave in the polarogram,as a function of the chemical structure of the SCS samples. The shape of thedesorption wave reflects domains of different substitution. A superimpositionofparameters like DS and pattern of substitution on the electrosorption behaviorwas observed. The AC polarography method described can be used as a tool todistinguish between an even or uneven distribution of substituents along thecellulose chain.     

搅拌条件下电流密度对Cu镀层的结构和表面形貌的影响

电沉积;晶体取向;搅拌条件下电流密度对Cu镀层的结构和表面形貌的影响     

碳纳米管电极超大容量离子电容器交流阻抗特性

采用碳纳米管作为超大容量离子电容器的电极材料,应用交流阻抗频谱法,研究了超大容量离子电容器的频率响应特性.结果表明,用碳纳米管块作电极,超大容量离子电容器在频率250 mHz以下出现“电荷饱和”；而用活性炭块作电极, 超大容量离子电容器在频率为100 mHz时仍未出现“电荷饱和”,这说明碳纳米管电极超大容量离子电容器的频率响应特性优于活性炭电极超大容量离子电容器的频率响应特性.上述两类超大容量离子电容器的阻抗谱中均出现倾角约为45°的直线段,其相位角均远小于理想电容器的相位角90°.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Amperometric Glucose Biosensor Based on the Deposition of Copper and Glucose Oxidase onto Glassy Carbon Transducer

ABSTRACT

The performance of a first generation glucose amperometric biosensor based on the entrapment of glucose oxidase (GOx) within a net of copper electrodeposited onto activated glassy carbon electrode, is described. The copper electrodeposited offers an efficient electrocatalytic activity towards the reduction of enzymatically-liberated hydrogen peroxide, allowing for a fast and sensitive glucose quantification. The influence of the electrodeposition conditions (pH, potential, time, copper salt and enzyme concentrations) on the response of the bioelectrode was evaluated from the amperometric signals of hydrogen peroxide and glucose. The combination of copper electrodeposition with a nation membrane allows an excellent selectivity towards easily oxidizable compounds such as uric and ascorbic acids at an operating potential of -0.050 V. The response is linear up to 2.0 × 10^?2 M glucose, the detection limit being 1.2 × 10^?3 M.     

Anodic Polarographic Behaviour of Hydrolyzed Penicillin V

Abstract

The electroactivity of a degradation product from penicillin V is described. This electroactive product is formed by acidic hydrolysis at pH 4.0 and heating at 90°C for 60 minutes.

This derivative has not been identified, but would seem to contain a thiol group. It gives a diffusion controlled anodic polarographic wave with a peak potential of -0.204 V versus SCE at pH 4.0.

The developed method has been applied to the analysis of penicillin V dosage forms and a recovery of 100.8 has been obtained.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．