High heat generation ability in AC magnetic field for nano-sized magnetic Y3Fe5O12 powder prepared by bead milling

Nano-sized magnetic Y₃Fe₅O₁₂ ferrite having a high heat generation ability in an AC magnetic field was prepared by bead milling. A commercial powder sample (non-milled sample) of ca. 2.9 μm in particle size did not show any temperature enhancement in the AC magnetic field. The heat generation ability in the AC magnetic field improved with a decrease in the average crystallite size for the bead-milled Y₃Fe₅O₁₂ ferrites. The highest heat ability in the AC magnetic field was for the fine Y₃Fe₅O₁₂ powder with a 15-nm crystallite size (the samples were milled for 4 h using 0.1 mm? beads). The heat generation ability of the excessively milled Y₃Fe₅O₁₂ samples decreased. The main reason for the high heat generation property of the milled samples was ascribed to an increase in the Néel relaxation of the superparamagnetic material. The heat generation ability was not influenced by the concentration of the ferrite powder. For the samples milled for 4 h using 0.1 mm? beads, the heat generation ability (W g⁻¹) was estimated using a 3.58×10⁻⁴ fH² frequency (f/kHz) and the magnetic field (H/kA m⁻¹), which is the highest reported value of superparamagnetic materials.     

Synthesis of CuS nanoparticles loaded on activated carbon composite for ultrasound‐assisted adsorption removal of dye pollutants: Process optimization using CCD‐RSM,equilibrium and kinetic studies

In this study, the CuS nanoparticles loaded on activated carbon (CuS‐NPs‐AC) composite was synthesized and then, characterized by XRD and FE‐SEM analyses. The prepared composite was used as a potential adsorbent for the simultaneous ultrasound‐assisted removal of Indigo Carmine (IC) and Safranin‐O (SO). The CuS‐NPs‐AC dose (0.01‐0.03 g), sonication time (1‐5 min), initial SO concentration (5‐15 mg L^‐1) and initial IC concentration (5‐15 mg L^‐1) as expectable effective parameters were studied by central composite design (CCD) under response surface methodology (RSM) to obtain an useful knowledge about the effect of simultaneous interaction between IC and SO on their removal percentage. The optimum SO and IC removal percentages were determined to be 98.24 and 97.15% at pH = 6, 0.03 g of the CuS‐NPs‐AC, 3 min sonication time, 12 and 10 mg L^‐1 of IC and SO. The values of coefficient of determination (R²) for SO and IC were 0.9608 and 0.9796, respectively, indicating the favorable fitness of the experimental data to the second order polynomial regression model. The isotherm data were well correlated with Freundlich model. The maximum monolayer adsorption capacities of 87.5 and 69.90 mg g^‐1 at room temperature for IC and SO in the investigated binary system expressed the high efficiency of the novel adsorbent for water cleanup within a short time. The investigation of correlation between time and rate of adsorption revealed that IC and SO adsorption onto the CuS‐NPs‐AC followed pseudo‐second‐order and intra‐particle diffusion simultaneously.     

铅掺杂对锡电沉积物形貌的影响

采用电化学沉积，配合扫描电镜(SEM)、电子探针微分析仪(EPMA)、金相等分析技术，研究了纯Sn及Pb0.1Sn0．9的二维沉积物的显微形貌和微结构，结果表明：由于晶粒生长的择优取向，纯锡的沉积物是规则的枝晶结构；铅掺杂削弱了锡晶粒生长的择优取向性，导致枝晶主干分叉，形成“之”字形枝晶结构，为结晶学因素对生长形貌的影响提供了一个实验证据。     

Estimation of Jc(B) dependence from self-field alternating current (AC) losses measured on Bi-2223/Ag tapes

Transport AC losses measured in self-field conditions on multifilamentary Bi-2223 tapes are often found to be lower than those calculated within the framework of the critical state model for a bulk wire with elliptical cross section, though generally higher than predicted for a strip. This effect is sometimes ascribed to the non-ideal geometry of the tapes, which does not exactly reproduce either shape. Here we propose an alternative explanation assuming that the critical current density of superconducting material depends on magnetic field. In practice, we analyzed the AC loss curve and deduced different I_c values for the individual data points, using the standard Norris equation for elliptical conductor. This gives the relation between ‘calculated' I_c and the self-field associated to AC transport current, which can be regarded as an alternative way to qualify the dependence of J_c on magnetic field. Important is that this procedure covers the range of fields below the self-field at I_c where the measurement in background DC field can not be used to determine J_c(B).     

纳米金刚石对电沉积镍基复合镀层微观结构及抗磨性能的影响

利用直流电沉积技术制备了纳米和微米镍镀层,以及纳米金刚石增强镍基复合镀层,考察了纳米金刚石颗粒对纳米及微米镍基质的表面形貌、微结构、硬度及磨损性能的影响．结果表明：引入纳米金刚石使得微米镍镀层的硬度和抗磨性能显著提高;但引入纳米金刚石对纳米镍镀层硬度的影响不大,对镀层的抗磨性能则反而产生不利影响．     

阴极微弧电沉积制备Al2O3陶瓷层技术及研究进展

阴极微弧电沉积技术是一种在材料表面通过微弧放电沉积陶瓷层的表面处理技术,利用该技术可以在金属及非金属表面生成耐磨、耐蚀性能优异的陶瓷膜层.本文介绍了阴极微弧电沉积技术的研究现状以及应用阴极微弧电沉积技术制备Al2O3陶瓷层的方法和基本原理,并且对阴极微弧电沉积技术的影响因素进行了总结,阐述了阴极微弧电沉积技术的应用前景和存在的问题.     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。     

Experimental validation of an effective carbon number-based approach for the gas chromatography–mass spectrometry quantification of ‘compounds lacking authentic standards or surrogates’

For the quantitative analysis of ‘compounds lacking authentic standards or surrogates’ (CLASS) in environmental media, we previously introduced an effective carbon number (ECN) approach to develop an empirical equation for the prediction of their response factor (RF). In this research, a series of laboratory experiments were carried out to benchmark the reliability of an ECN approach for sorbent tube/thermal desorption/gas chromatography (GC)/mass spectrometry (MS) applications. First, the ECN values were determined using external calibration data from 25 reference volatile organic compounds (VOCs) using two MS dectectors (quadrupole (Q) and time-of-flight (TOF)). Then, a certified standard mixture of 54 VOCs was analyzed by each system as a simulated unknown sample. The analytical bias, assessed in terms of percentage difference (PD) between the certified and ECN-predicted mass values, averaged 19.2 ± 16.1% (TOF-MS) and 28.2 ± 27.6% (Q-MS). The bias using a more simplified carbon number (CN)-based prediction increased considerably, yielding 53.4 ± 53.3% (TOF-MS) and 61.7 ± 81.3% (Q-MS). However, the bias obtained using the ECN-based prediction decreased significantly to yield average PD values of 9.84 ± 7.28% (TOF-MS) and 16.8 ± 8.35% (Q-MS), if the comparison was limited to 26 (out of 54) VOCs with CN ≥ 4 (i.e., 25 aromatics and hexachlorobutadiene).