非晶态Fe－W合金镀层的表面改性

将Ｆｅ－Ｗ非晶态镀层在铬酸盐钝化液中进行化学钝化与电化学钝化，使之形成含铬钝化膜。阳极极化曲线说明，钝化后镀层的孔蚀电位向正向移动了约１．６８Ｖ；Ｆｅ－Ｗ非晶镀层在氯化钠溶液中浸泡近１ｈ表面发生严重腐蚀，而经钝化处理的镀层浸泡１个月，表面无变化，仍具有金属光泽。     

镧与镍共沉积的研究

由于含稀土的合金新材料具有多种特殊功能，因此，其制备技术已为人们所关注．制备含稀土合金的方法有高温烧结法、真空蒸发法、离子溅射法及电化学法等．其中电化学法设备简单，容易获得不同组份的表层材料，但是，由于稀土元素的电位很负，从电解质水溶液中沉积稀土及其合金是相当困难的，以往曾有采用熔融盐电解质或非水电解质制备稀土合金的一些报导[1，2]，而从电解质水溶液中电沉积稀土合金的报导甚少．本研究采用适宜的络合剂，实现了从电解质水溶液中电沉积Ni－La合金，镀层中钠含量最高达22．58％（质量分数，下同）．通过XPS及…     

铜-镍合金电极表面组成及状态的变化对硝基苯电还原的影响

铜-镍合金电极表面组成及状态的变化对硝基苯电还原的影响;Monel合金电极;表面状态;硝基苯;对氨基苯酚;电还原     

溶液中铝还原制备Ni-Fe合金纳米粉体及其还原过程

用多相合成方法, 以金属铝粉作还原剂还原FeSO₄·(NH₄)₂SO₄和NiSO₄·(NH₄)₂SO₄的混合溶液, 制备了Ni-Fe合金的钠米粉体, 并对反应的过程进行了讨论.     

Chemical preparation and investigation of Fe-P-B ultrafine amorphous alloy particles

A series of Fe-P-B ultrafine amorphous alloy particles has been prepared by the chemical reduction method The composition and size of the particles have been effectively adjusted.Mossbauer spectroscopy in addition to sonic other techniques has been used to investigate the reaction process,the factors that influence the preparation,the crystallization of the particles,and the interactions between the components within them.The results indicate that the co-deposition of iron,phosphorus and boron atoms in the solution at room temperature forms Fe-P-B amorphous alloy particles,and a preferential bonding of Fe-P bond to Fe-B one exists in the particles.     

金属腐蚀监测的光波导传感方法研究

本文提出一种用于金属腐蚀监测的光波导传感方案 ,用金属膜层局部取代光波导的介质包层 ,构成腐蚀敏感膜 ,从而获取金属腐蚀信息 .依据波导理论选用 72 1比色皿上的石英玻璃作为光波导材料 ,利用电化学方法在波导材料内表面上形成Fe C合金腐蚀敏感膜 ,并用XRD、EDX等对膜层结构进行分析 .在电化学腐蚀膜的同时 ,用光学方法记录光波导输出光功率的变化 ,实验结果表明电化学方法与光学方法获取的腐蚀信息同步 ,证实了所提传感方案可行     

Mo对脱合金制备的Ni-Mo电极骨架结构与析氢性能的影响

采用快速凝固结合脱合金化方法制备了不同Mo含量的纳米多孔Ni-Mo合金,通过X射线衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）和N₂吸附-脱附分析等对多孔合金的物相、形貌结构及孔径分布进行了表征,并通过线性扫描伏安、Tafel斜率、交流阻抗和循环伏安等方法测试了多孔合金电极的电催化析氢性能.结果显示,多孔合金电极材料在50 mA/cm²电流密度下析氢过电位随着Mo含量的增加先降低后升高,Ni_2.5Mo_2.5合金析氢活性最强,过电位为218 mV,析氢过程由Volmer-Heyrovsky步骤控制,交换电流密度为0.29 mA/cm²,经1000周循环后的极化曲线基本保持原状,50 mA/cm²电流密度下过电位增加3.67%,表现出优良的析氢稳定性.     

Introduction of a biowaste/graphene oxide nanocomposite as a coating for a metal alloy based SPME fiber: Application to screening of polycyclic aromatic hydrocarbons

The present study introduces a high efficiency metal alloy-based solid-phase microextraction (SPME) fiber coated with a green biowaste nanocomposite of chicken feet yellow membrane mixed with graphene oxide (CFYM/GO). An Al/Cr commercial heating element (aluchrom, AC) has been selected as the fiber substrate and designed as coiled form (CAC-SPME) to enhance its extraction and pre-concentration capacity. The fabricated fiber, CAC-SPME/CFYM/GO, has been employed for the extraction and pre-concentration of some commonly seen PAHs in different standard/real samples prior to their high performance liquid chromatography- ultraviolet (HPLC-UV) analyzing. The synthesized materials and the fibers surface were characterized by field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy analysis and Brunauer-Emmett-Teller surface area analysis. Under the optimized experimental conditions, low detection limits (LOD, 0.039–0.30 µg L^–1), wide linear ranges (LR, 0.13–643 µg L^–1) and good relative recoveries (RR, 76.20–105.60%) were achieved for all the target analytes. The materials applied to prepare this fiber were low-priced and accessible and also eliminated the need for expensive coating substances. In addition, using of the AC alloy substrate was increased the fiber physicochemical resistance and solved the breakage drawback of the conventional SPME fibers. Moreover, simple fabrication, high rigidity, long service life and high extraction capacity were some of the other advantages of the suggested fiber. Therefore, the proposed method can be utilized successfully for the routine analysis of PAHs in different matrixes.     

稀土元素取代对Ti_(0.26)Zr_(0.07)V_(0.24)Mn_(0.1)Ni_(0.33)贮氢合金结构和电化学性能的影响

研究了5种稀土元素部分取代V对Ti0.26Zr0.07V0..24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24Mn0.1Ni0.33和Ti0.26Zr0.07V0.24-xMn0.1Ni0.33REx(x=0.005;RE=La,Ce,Nd,Ho,Y)均由体心立方结构的钒基固溶体相和六方结构的C14 Laves相组成。在合金中加入稀土元素,会使合金中两相的晶胞体积同时增大。稀土元素部分取代V均改善了合金电极的活化性能。La和Nd元素取代后,合金电极的最大放电容量明显增加,而Ce的取代提高了合金电极的循环稳定性。Ce,Nd,Ho,Y均改善了合金电极的倍率放电性能。合金电极在高温状态下表现出了良好的放电性能,其中Nd在333 K时放电容量可达550.4 mAh·g-1。稀土元素对荷电保持率的影响各异。     

中间相Si-Cu合金作为锂离子电池负极材料的第一性原理研究

采用第一性原理平面波赝势法,对中间相Si-Cu合金作为锂离子电池负极材料的嵌脱锂机理进行研究.结果表明,4个Si-Cu合金相中Si0.125Cu0.875合金相具有最低的体积膨胀系数及最低的嵌锂电位,导电性在4个合金相中排第二位,具有最佳的电化学综合性能.