Complex turing patterns in non-linearly coupled systems

Recently pattern formation in layered structures, showing complicated superimposed patterns, has been modeled by coupling two Turing systems linearly, i.e., passively, such that the characteristic length scales of the independent systems are well separated. Here we propose a model of two non-linearly coupled Turing systems to study pattern formation in layered membrane-like structures, where the coupling plays an active role and changes the kinetics of the uncoupled systems. Extensive numerical simulations show that non-linear coupling generates a number of new regular patterns different from the ones observed earlier with linearly coupled systems. Some of them turn out to be superimposed patterns with different length scales, but many are not. Also, contrary to the linear coupling case, the strength of the non-linear coupling is found to play an important role in the formation and selection of patterns.     

Decay rate with coordinate-dependent diffusion coefficients

Using a master equation for the reduced density matrix of open quantum system, the influence of coordinate-dependent microscopical diffusion coefficients on the decay rate from a potential well is studied. For different temperatures, frictions, heights of barrier and ratios of stiffnesses of the potential in the minimum and on the top of the barrier, the quasistationary decay rates are obtained with the sets of coordinate-dependent and -independent microscopical diffusion coefficients, and coordinate-dependent phenomenological diffusion coefficients.     

Synthesis and luminescent properties of nanoparticles GdCaAl3O7:RE (RE=Eu, Tb) via the sol-gel method

By using metal nitrates as starting materials and citric acid as complexing agent, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ powder phosphors were prepared by a citrate-gel method. Thermal analysis (TG-DTG), X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results of the XRD indicated the precursor samples began to crystallize at 800 °C and the crystallinity increased with elevation the annealing temperature. TEM images showed that the phosphor particles were basically of spherical shape, with good dispersion about a particle size of around 40-70 nm. Upon excitation with UV irradiation, it is shown that there is a strong emission at around 617 nm corresponding to the forced electric dipole ⁵D₀-⁷F₂ transition of Eu³⁺, and at around 543 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. The dependence of photoluminescence intensity on Eu³⁺ (or Tb³⁺) concentration and annealing temperature were also studied in detail.     

表面活性剂增敏光度法测定锌

在弱酸性(pH=4.5)介质中,非离子表面活性剂Tween-80存在下,7-(苯并噻唑-2-偶氮)-8-羟基喹啉-5-磺酸(BTAQS)与锌形成2:1的紫色配合物,最大吸收波长位于580nm处,表观摩尔吸光系数为7.4×104L·mol-1·cm-1,锌含量在0-6μg/25mL范围内符合比耳定律。测定矿样中的锌,结果满意。     

钒(Ⅴ)-7-碘-8-羟基喹啉-5-磺酸显色体系测定钢样中的钒

研究了7-碘-8-羟基喹啉-5-磺酸（H2QSI）在乙醇存在下分光光度法测定钡（Ⅴ）的最佳条件。在乙醇存在下pH4的硫酸介质中,（H2QSI）与V（Ⅴ）形成了红棕色配合物,最大吸收位于506nm处,表观摩尔吸光系数εmax＝2.9×103L·mol-1·cm-1,有色配合物组成为V（Ⅴ）:（H2QSI）＝1:3。钒（Ⅴ）在0-14μg／25mL符合比耳定律、本法用于钢样中的测定,结果满意。H2QSI是光度分析中的一种显色剂,近年来,8-羟基喹啉类试剂用于钒（Ⅴ）的测定已有报道[1]:,H2QSI曾见用于稀土元素的光度测定[2],但用于钒（Ⅴ）的测定尚未见报道。本文研究了V（Ⅴ）与H2QSI的显色反应条件及组成,在pH4的乙醇介质中,V（Ⅴ）与H2QSI生成红棕色配合物ε506nm＝2.9×103L·mol-1·cm-1。本方法用于低碳合金钢中钒的测定,结果满意。     

新型红色发光材料La3PO7:Eu3+的合成及发光性质研究

用固相法合成了La3PO7:Eu3+,用X射线衍射仪测定了其晶体结构,室温下用Hitachi F-4500测定了其光致发光性质.结果表明合成的La3PO7:Eu3+属单斜相结构,Eu3+在单斜结构的La3PO7基质中占据非对称性格位.在254 nm光激发下,La3PO7:Eu3+发射出较强的红光,表明Eu3+的5D0→7F2跃迁强度远大于5D0→7F1的跃迁强度,其色坐标和Y2O3:Eu3+的色坐标位置相近.另外,还研究了Eu3+在体相La3PO7材料中的猝灭浓度,发现当掺杂Eu3+浓度增大到7.6 mol%时,出现浓度猝灭.     

CaLaAl3O7:Eu3+的凝胶-燃烧法合成及其发光性能

采用柠檬酸凝胶-燃烧法合成了CaLa1-xAl3O7:xEu3+(0.05≤x≤0.8)材料的前驱粉末,在低于700℃退火处理时,得到非晶态样品,而高于800℃退火处理后为纯相的CaLa1-xAl3O7:xEu3+粉末样品.通过激发光谱和发射光谱研究了Eu3+在CaLaAl3O7基质中的发光性能及Eu3+掺杂量,退火温度和柠檬酸与金属离子的配比等对发光强度的影响.结果显示,非晶态和晶态CaLa1-xAl3O7:xEu3+样品均可发光,非晶态样品的最强激发峰出现在7F0-5D2的465 nm处,而晶相样品的最强激发峰为7F0-5L6跃迁的394nm.非晶态粉末在465 nm激发下发射光谱由5D0-7F0的578 nm和5D0-7F1的587 nm及5D0-7F2的615nm组成.而晶态粉末在394 nm激发下的发射光谱与非晶态相比5D0-7F0跃迁消失了,同时5D0-7F1跃迁发生谱线劈裂,出现在587和596 nm两处.随着退火温度的升高,主峰615 nm强度增强了,但5D0-7F1跃迁峰的增强更加明显.     

A theoretical overview of hypernuclear weak decay

The physics of the weak decay of hypernuclei is briefly reviewed from a theoretical point of view. Special regard is devoted to the recent progress concerning the determination of the non-mesonic decay widths and the asymmetry parameters. Convincing evidence has been achieved for a solution of the long-standing puzzle on the ratio Γ_n/Γ_p. Very recently, it has been shown that the exchange of a ππ pair in the weak mechanism plays a crucial role in explaining the discrepancies between theory and experiment on the decay asymmetries.     

2,7-二氯荧光素与蛋白质相互作用的分光光度法研究

首次采用分光光度法研究了模拟生理条件(pH 7.4 Tris-HCl缓冲溶液,离子强度I=0.1)下2,7-二氯荧光素与牛血清白蛋白(BSA)相互作用的情况.研究结果表明:两者相互作用形成稳定的复合物,最大吸收波长为509nm,与2,7-二氯荧光素的最大吸收波长502nm比较,红移了7nm;两者之间主要通过静电引力结合,但并不排除疏水作用力和氢键;两者之间的结合数为32.     

熔融织构YBa2Cu3O7-δ晶体中磁通涡旋锁定转变反常行为研究

通过改变磁场与c轴方向夹角测量了熔融织构YBa₂Cu₃O_7-δ (YBCO)晶体的磁力矩信号响应, 观察到了磁通涡旋系统的锁定(lock-in)转变行为以及锁定转变角正比于外磁场强度的反常现象. 基于Ginzburg-Landau理论和磁通涡旋线Kink结构模型, 对上述锁定转变反常现象进行了分析讨论, 提出了熔融织构YBCO晶体中存在平行于a-b面的延展性关联缺陷结构假设, 导出了锁定转变临界角与温度和磁场之间的关系, 理论分析模型结果与实验测量结果基本符合.