Crystal structures of 4,7-phenanthrolino-5,6:5′,6′-pyrazine tetrahydrate and 1,4,5,8,9,12-hexaazatriphenylene dihydrate

The crystal structures of 4,7-phenanthrolino-5,6:5,6-pyrazine tetrahydrate (I) and 1,4,5,8,9,12-hexaazatriphenylene dihydrate (II) have been determined from low temperature (173 K) x-ray single crystal diffraction data. I crystallizes in the triclinic system, space group P with a = 11.2687(6), b = 12.4766(6), c = 12.7068(7) Å, = 113.4740(10), = 91.605(2), = 114.587(2)°, V = 1449.33(13) ų, and Z = 4. II crystallizes in the orthorhombic system, space group Pca2₁ with a = 18.187(2), b = 9.2576(11), c = 6.9672(8) Å, V = 1173.0(2) ų, and Z = 4. In both structures the planar heterocyclic molecules stack with interplanar distances down to 3.3 Å, which is consistent with self--complexation. The crystal water molecules provide links between the columns of stacked molecules through hydrogen bonds. In each compound the N-C bond lengths fall into two distinct groups (mean values 1.330(3) vs 1.361(1) Å in I and 1.320(3) vs 1.357(5) Å in II), as do the C-C bonds of the central phenyl rings (1.411(4) vs 1.467(1) Å in I and 1.405(5) vs 1.458(4) Å in II).     

重离子辐射提高腺病毒介导小鼠黑色素瘤细胞转染率的研究

探讨12C6+ 离子束辐射对用带有绿色荧光蛋白基因的缺陷性腺病毒（AdCMV GFP）转染小鼠黑色素瘤细胞(B16细胞系)的影响。 采用不同剂量的12C6+ 重离子束辐射经AdCMV GFP 转染的B16细胞， 利用流式细胞仪检测腺病毒的转染率。 结果表明， 12C6＋重离子束辐射能提高腺病毒对B16细胞的转染率， 且具有量效关系。 此外， 先转染后辐射法比起先辐射后转染法能更显著地提高转染率。The effect of 12C6+ beam irradiation on AdCMV GFP (a replication deficient recombinant adenoviral vector containing CMV promoter and green fluorescent protein) gene transfection efficiency for murine melanoma cell B16 has been investigated. B16 cells infected with AdCMV GFP were irradiated by different doses of 12C6+ beam. The transfection efficiency was assessed by flow cytometry (FCM). Results show that 12C6+ beam irradiation can improve tansfection efficiency of AdCMV GFP on murine melanoma cell B16 in a dose dependent manner. In addition， the tansfection efficiency in pre tranfection plus irradiation group is higher than that in pre irradiation plus tranfection group at the same dose irradiation dose.     

多晶LaB6阴极的脉冲热发射特性

 采用多晶LaB₆材料制成平板二极管阴极，阳极采用钼材料，阴极采用热传导与热辐射加热，加热体为石墨。实验研究了不同阴极温度、不同真空度下的脉冲发射特性，并对热发射稳定性进行了分析。结果表明： 在动态真空系统中， 阴极发射面积为0.012 1 cm²， 工作真空度为2×10^-4 Pa， 阴极温度分别为1 600， 1 650和1 700 ℃，在脉冲宽度为40 ms、重复频率为107 Hz的条件下，最大脉冲发射电流密度分别为34.0，44.0和53.8 A/cm²; 2×10^-4，5×10^-4和2×10^-3 Pa压强下的发射能力没有明显的差异;脉冲宽度的变化不影响发射电流密度的变化。     

LIST developments at IGISOL

The ion guide technique was developed in Jyv?skyl? during the early 1980's. In the ion guide the reaction recoil products are stopped and thermalized in high purity helium gas where they remain ionic due to high ionization potential of helium atoms. Different designs of ion guide exist for light-ion induced fusion reactions, for heavy-ion induced fusion and for proton induced fission. Although the IGISOL method is fast and universal it is chemically unselective and in many cases relatively inefficient. In order to address these deficiencies in the technique, a new laser ion source project, FURIOS (Fast Universal Resonant laser Ion Source), commenced in 2004. In addition, resonance ionization spectroscopy has been tested off – line within a sextupole ion beam guide.     

Structure of low-lying <Superscript>12</Superscript>C resonances

The hyperspherical adiabatic expansion is combined with complex scaling and used to calculate low-lying nuclear resonances of ¹²C in the 3α model. We use Ali-Bodmer potentials and compare results for other potentials α-α with similar ⁸Be properties. A three-body potential is used to adjust the ¹²C resonance positions to desired values extending the applicability of the method to many-body systems decaying into three α-particles. For natural choices of three-body potentials we find 14 resonances below the proton separation threshold, i.e. two 0⁺, three 2⁺, two 4⁺, one of each of 1^±, 2^-, 3^±, 4^-, and 6⁺. The partial-wave decomposition of each resonance is calculated as a function of the hyperradius. Strong variation is found from small to large distance. The connection to previous experimental and theoretical results is discussed and agreements as well as disagreements are emphasized.     

Data and modeling of negative ion transport in gases of interest for production of integrated circuits and nanotechnologies

We review techniques to prepare, evaluate and apply sets of cross section and transport data for negative ions that are required for the modeling of collisional non-equilibrium plasmas used for processing of microelectronic circuits. We collect and discuss the transport coefficients and cross section sets.We have compiled data for negative ions in CF₄ and CF₄-related negative ions in rare gases. In addition, we consider data for F⁻ and CF₃⁻ in rare gases. Furthermore, we analyze the cross sections of halogen negative ions in rare gases and other molecules. This is followed by the data for SF₆ related ions in SF₆ and in rare gases. The cross section for scattering of O⁻ in O₂ has been derived from the transport data and used to make calculations of the transport properties. Finally we give a brief discussion of the availability of the data for H⁻ ions in H₂. We have derived cross sections in several cases but the basic aim is to show the basic features of transport coefficients. In particular we discuss the need to represent properly some details such as the non-conservative nature of transport coefficients and the anisotropy of diffusion. Application of approximate theories and representations of cross sections are also discussed.     

喷雾热解法制备红色发光粉LiEu(SiO2)1/6W2O8的研究

采用喷雾热解法制备红色荧光粉LiEu(SiO₂)_1/6W₂O₈。研究了反应温度、前驱体溶液浓度、载气流速对实验结果的影响。通过扫描电镜、X射线衍射、激发和发射光谱对所制样品进行了研究,发现样品颗粒呈实心类球形、结晶度好、表面光滑、发光强度较高、粒径平均1.5μm左右且分布较窄。该类荧光粉激发主峰位于396nm,发射主峰位于615nm。LiEu(SiO₂)_1/6W₂O₈发光的色坐标为:x=0.667 9,y=0.3310,与NTSC的红色标准基本一致,该荧光粉色纯度非常高,适用于制造紫光芯片激发的白光LED。用喷雾热解法制备红色荧光粉LiEu(SiO₂)_1/6W₂O₈的研究尚未见报道。     

VUV spectroscopy of pure and Tm-doped LicaAlF6 crystals

Nominally pure and Tm³⁺-doped LiCaAlF₆ crystals were grown by the Czochralski technique in a reducing atmosphere. The optical properties of transparent single crystals were studied using absorption and time-resolved luminescence spectroscopy in the VUV spectral range (330-100 nm). The strongest VUV emission peaking at 60 800 cm⁻¹ with a decay time of 5.6 μs (7 μs) at 300 K (7.4 K) was assigned to the spin-forbidden 4f¹¹5d-4f¹² transition of Tm³⁺. The fine structure observed in the VUV emission and corresponding excitation spectra indicate intermediate strength of electron-phonon coupling in this system. The efficient excitation of f-f emissions above 72 000 cm⁻¹, higher than the onset of f-d absorption at 63 000 cm⁻¹, is mainly caused by the F⁻ to Tm³⁺ charge transfer absorption. The nature of various host-related excitation processes in the energy transfer to the Tm³⁺ ions is discussed.     

Synthesis and luminescent properties of Y6W2O15:Eu phosphors

In this paper, a novel phosphor, Y₆W₂O₁₅:Eu³⁺ was synthesized by thermal decomposition and phase transition of its decatungstate gel precursor. With stepwise increase of temperature to 750 °C, a crystalline phase of Y₆W₂O₁₅:Eu³⁺forms that gives intense red emission when excited at 466 nm, the emission is attributed to the Eu³⁺ ions transitions from ⁵D₀ excited states to ⁷F_J (J=0-4) ground states. The long excitation wavelength proves the Eu³⁺ transition follows the photoexcitation of the oxygen-metal (O→W lmct) charge transfer bands in yttrium tungstate. Some structural information regarding Y₆W₂O₁₅ provided by luminescence is in accord with that characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The long-wavelength excitation properties of this material may find application in the production of red phosphors for white light-emitting diodes (LEDs).     

Polyamide 6‐polycaprolactone multiblock copolymers: Synthesis,characterization, and degradation

This work describes the synthesis and characterization of polyamide 6 (PA 6)‐polycaprolactone (PCL) multiblock copolymers. Low molar mass, fully amine end‐capped PA 6 was prepared by the addition of a diamine monomer during ε‐caprolactam polymerization. A low molar mass PCL was selected to be incorporated as the biodegradable block and was fully end‐capped with toluene 2,4‐diisocyanate. End group analysis and molecular weight characterizations were performed for both end‐functionalized polymers by SEC, NMR and titration analysis. Incorporation of PCL into PA 6 was mainly achieved by solution mixing of the two end‐functional blocks and, was continued after the removal of the solvent with solid state polymerization (SSP) by gradual heating until about 40 °C below the melting temperature of the PA 6. Molecular weights started to grow immediately during solution mixing and only increased marginally during the SSP treatment. FTIR and SEC studies confirmed the reaction between the two components. DSC data, in combination with the enhanced molar mass during solution mixing pointed to a blocky microstructure, for which distinct melting and crystallization temperatures were observed for the PCL and the PA 6 blocks. Hydrolytic and enzymatic degradation studies were performed at 25 °C where the degree of degradation was followed by weight loss analysis, SEM and SEC. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011