Energy Distribution in the SU（1,1）Coherent State of Hydrogen

We Construct and SU(1,1)coherent state for hydrogen,we discuss its properties,and we give the energy distribution law of the atom.The coherent state may be used to describe the atomic states of the discrete spectrum.     

Effect of Notoginsenoside-Rg1 on the Expression of Several Proteins in the Striatum of Rat Models with Parkinson＇s Disease

After establishing hemi-Parkinsonian rat models, the relationships between neuron death and the expression of several proteins, such as c-Fos, GFAP, GDNF, NF-κB and some cytokines were determined. Therapeutics experiments with notoginsenoside-Rg1 were carried out. The research results show that the expressions of GFAP, NF-Kκ and c-Fos will obviously increase in the lesion side of the striatum and the expression of GDNF will decrease, which implies that the signal transduction pathway may participate in the apoptosis in neurons. The levels of some cytokines such as TNF-α, IL-1β in the striatum of PD rat models increased compared to those of normal rats. The results of the therapeutics experiments show that notoginsenoside-Rg1 may repress the immune inflammation response and regulate the immune function through the neuro-immune molecular network. Therefore, notoginsenoside-Rg1 can be used as an effective drug for anti-oxidation and anti-inflammation, and can be used in the therapy of Parkinson＇s disease（PD）.     

InxGa1-xAs-GaAs应变层量子阱结构的流体静压光荧光研究

本文报道了对分子束外延(MBE)生长的In_0.25Ga_0.75As-GaAs应变层量子阱结构在77K下的压力光荧光(PL)研究的结果。流体静压力从0到50kbar.,给出了In_0.25Ga_0.75As-GaAs应变层量子阱的Γ谷压力系数,实验观察到了量子阱中能级与势垒GaAs中X谷的能级交叉。通过对其压力行为的分析,给出了In_0.25Ga_0.75As-GaAs异质结的导带与价带跃变比:Q_c=△E_c:△E_v=0.68:0.32。对(InGa)As-GaAs应变量子阱常压下的理论分析与实验符合很好。本文也对Al_0.3Ga_0.70As-GaAs量子阱进行了讨论。 关键词：     

LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.     

四次函数实零点的完全判据和正定条件

本文给出了四次函数实零点的完全判据和正定条件,这一结果在研究多项式系统的奇点分析和分支问题时给出了可以实用的判据．     

Characteristics of Nd：GdVO4 Laser with Different Nd-Doping Concentrations

We report the properties of a compact diode-pumped continuous-wave Nd：GdV04 laser with a linear cavity and different Nd-doped laser crystals. In a 0.2at.% Nd-doped Nd：GdVO4 laser, 1.54 W output laser power is achieved at 912nm wavelength with a slope efficiency of 24.8% at an absorbed pump power of 9.4W. With 0.3at.% Nd-doping concentration, we can obtain the either single-wavelength emission at 1064nm or 912nm or the dual-wavelength emission at 1064nm and 912nm by controlling the incident pump power. From an incident pump power of 11.6 W, the 1064nm emission between ^4Fa/2 and ^4I11/2 is suppressed completely by the 912nm emission between ^4Fa/2 and ^4I9/2. We obtain 670 mW output of the 912nm single-wavelength laser emission with a slope efficiency of 5.5% by taking an incident pump power of 18.4 W. Using a Nd：GdV04 laser with 0.4at.% Nd-doping concentration, we obtain either the single-wavelength emission at 1064nm or the dual-wavelength emission at both 1064nm and 912nm by increasing the incident pump power. We observe a strong competition process in the dualavelength laser.     

HL-2A托卡马克边界等离子体数值模拟及非日冕平衡条件下的杂质辐射问题研究

对边界层等离子体中常见的物理问题，从两点模型到二维流体描述。从原子分子物理过程到杂质的输运和辐射等进行了系统的归纳和总结，特别是对等离子体不同参数运行区如鞘层限制参数区、传导限制参数区以及脱靶参数区等的一维流体描述，在参阅相关文献的基础上使用一定的假设条件进行了简单推导。分别阐述了它们的特点。     

精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。