质子与裂变核238U反应的理论计算

利用球型光学模型、耦合道理论、核内级联、激子模型、蒸发模型、带宽度涨落修正的Hauser-Feshbach模型,Bohr-Wheeler裂变理论,对入射能量从阈能到200 MeV的p+²³⁸U各种反应进行了计算,计算结果和实验符合较好.     

高精度激光倾角测量技术研究

本文提出了一种高精度激光电子二维倾角测量技术,该技术利用液体表面多次光反射,将倾角变化转换成激光光斑的位移,并通过多次光学反射实现光学放大,从而实现了倾角和倾角变化的高精度测量.利用本技术实现的倾角测量仪器具有测量精度高、体积小等优点,经过标定试验系统测量精度达到2.5″.高精度激光电子二维倾角测量系统可广泛应用于水坝安全监测工程、各种建筑和检测领域.     

Nuclear Spin–Lattice Relaxation of Single Crystal Sr14Cu24O41

Nuclear spin–lattice relaxation rate T ₁ ⁻¹ has been measured for the ladder sites of two single crystals Sr₁₄Cu₂₄O₄₁ (Sr14-A,B) by ⁶³Cu NMR/NQR. The hole localization around 100 K appears as a peak in the T variation of T ₁ ⁻¹(NQR). On the other hand, it is suppressed in the T ₁ ⁻¹ (NMR) data under the magnetic field H ∼ 11 T, and a new peak appears around 20 K. T ₁ ⁻¹(NMR) around the peak is more enlarged for Sr14-B than for Sr14-A. Hence, holes on the ladders of Sr14-B tend to be more localized. This is considered to be an origin for the occurrence of the magnetic order in Sr14-B under H ∼ 11 T.     

Particle multiplicities in the fission-like reactions of 340 MeV Si on Th

Pre-scission and post-scission multiplicities of neutrons and alpha particles have been simultaneously measured for the fission-like reactions of 340 MeV ²⁸Si on ²³²Th. Dynamical model calculations using HICOL code predict that about 90% of the observed events are of quasi-fission type while the remaining 10% are from compound nucleus fission decay. Moving source fits were carried out to the observed neutron and alpha particle spectra, measured at different angles with respect to the fragment directions. The pre-scission and post-scission neutron multiplicities are deduced to be 8.7±2.0 and 9.4±2.0, respectively. The corresponding multiplicity values for alpha particles are found to be 0.22±0.08 and 0.1±0.03. From the measured post-scission neutron multiplicity, it is inferred that about 65±20 MeV of the initial excitation energy remains at scission. This may be compared to the value of 85±30 MeV estimated from PACE2 statistical model calculations, adjusted to reproduce the measured pre-scission neutron multiplicity. From a comparison of the Statistical Model predictions with the measured pre-scission neutron multiplicity, the fission delay is estimated to be of 5⁺⁷₋₃×10⁻²⁰ s which overlaps with the average duration of fission-like process from the contact to the scission point (2×10⁻²⁰ s) as determined from HICOL-based dynamical calculations. For the delay time deduced as above, the pre-scission alpha particle multiplicity calculated by the PACE2 code is about a factor two larger than the experimental one, demonstrating the difficulties in modelling the alpha particle emission from highly elongated shapes that characterize the fissioning system from the contact point to scission.     

钚气溶胶环境中惰性气体氪迁移过程研究

放射性气体的安全性问题是涉及反应堆运行中必需研究的重要问题.因此在钚气溶胶环境中,对钚材料裂变产生的放射性气体裂变产物,需要研究其在钚气溶胶环境中的迁移过程.对放射性惰性气体Kr87,Kr88的实验测量数据进行了具体分析.依据它们具有钚材料直接裂变和作为固体裂变产物子体两种来源这一物理特性,在不同的制样时间对Kr87/Kr88比值变化规律进行分析.确立了这两种来源的在钚气溶胶环境中的物理图像和迁移过程的物理模型,并与实验数据进行比较以验证模型的正确性. 关键词： 钚气溶胶 气体裂变产物 放射性Kr87/Kr88 迁移过程     

分子动力学模拟压水反应堆中联氨对水的影响

本文采用分子动力学方法模拟在常温常压下(1 atm,298 K)和在压水堆环境下(155 atm,626 K),水分子数为256,联氨(N₂H₄)分子数为0,25,50,75等不同数目时,水和联氨粒子系统的动力性质和微观结构.同时探讨了联氨分子的引入对水中溶解氧的影响.从模拟结果可知,在常温常压下,当联氨的分子数为0,25,50,75时,粒子系统的均方位移会随联氨分子数的增加而增加;联氨分子数为0与为25,50,75比较时会少一个数量级;压水堆环境下,联氨分子数 关键词： 分子动力学 压水堆 联氨     

Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

介孔材料MCM-41的导热研究

文章根据二氧化硅介孔材料MCM-41纳米孔结构特点,首先建立和验证了纳米结构单元模型,然后使用平衡分子动力学方法模拟了孔壁热导率;接着耦合孔隙内气体导热,开展了一维传热分析,最终提炼出MCM-41的有效热导率表达式;并对壁厚、孔径和孔隙率对热导率的影响进行了分析.研究结果表明,MCM-41具有良好的绝热性能,其有效热导率随孔隙率增大近似呈线性减小,且表现出各向异性;导热性能沿孔道长度方向表现出准一维特性. 关键词： 有效热导率 介孔材料 MCM-41 平衡分子动力学     

从“福岛第一核电站事故”看我国核能利用的核安全

文章简要说明了福岛第一核电站事故的起因、发展和后果,并对核电站全厂断电、反应堆压力容器及安全壳超压、氢爆等导致事故恶化的原因作了分析.文章还就导致福岛核事故的相关因素与我国核电站的安全设计及防范对策进行了分析比较.在吸取福岛核事故的经验教训方面,文章提出了若干值得引发关注的启示,作为我国在建和在役核电站的改进,以及新设计核电站的参考.文章还就我国能源的状况,核能发展的必要性,以及核能发展的方针进行了探讨.     

The strength of octupole correlations in neutron-rich Xe isotopes

Excited levels in ¹⁴⁰Xe and ¹⁴²Xe nuclei, populated in the spontaneous fission of ²⁴⁸Cm, were studied by means of prompt γ-ray spectroscopy, using EUROGAM2 array. We report the first observation of an octupole band in ¹⁴²Xe and extend the octupole band in ¹⁴⁰Xe. Level schemes of ¹⁴⁰Xe and ¹⁴²Xe obtained in this work show patterns characteristic of ocupole-vibrational bands. Properties of octupole bands in Xe isotopes indicate that octupole correlations in these nuclei are lower than in the corresponding Ba nuclei. The electric dipole moment of ¹⁴²Xe was found to be larger than in other Xe isotopes, contrary to theoretical predictions. This may be due to the special role of the N = 88 neutron number. Received: 18 November 2002 / Accepted: 15 December 2002 / Published online: 25 February 2003 RID="a" ID="a"e-mail: urban@fuw.edu.pl Communicated by D. Schwalm