Adsorption of ionic surfactants on polar surfaces with a low content of chemically adsorbed alkyl chains

Colloidal silica and titanium dioxide were surface-modified by chemisorption of octadecyl dimethylmethoxy silane. The surface density of these alkyl silane groups was adjusted to less than 7% of the available surface hydroxyls, leaving the adsorbents hydrophilic and electrically charged in aqueous solution.Ionic surfactants (tetradecylpyridinium chloride and sodium lauryl sulfate) are adsorbed onto the surface-modified silica and titanium dioxide from aqueous solution, even in the case where the surface of the adsorbents exhibits the same sign of electrical charge as the surfactant ionic head groups. According to the adsorption model of Gu the chemiadsorbed alkyl chains are supposed to serve as anchors for small surface aggregates of the ionic surfactants.     

Synthesis and X-ray crystal structure of oxamido-bridged heterobinuclear Ni(Ⅱ)-Cu(Ⅱ) complexes

The two complexes [Ni(oxen)Cu(L)2](ClO4)2.xH2O (L=2,2'-bipyridyl(bpy), 1,10-phenanthroline(phen)) have been synthesized, where oxen is N,N'-bis(2-aminoethyl)oxamido di-anion. The crystal structure of [Ni(oxen)Cu(bpy)2](ClO4)2.CH3OH has been determined by X-ray diffraction method. The crystal is triclinic system, space group P1 with a=12.179(1),b=12.298(2), c=11.476(2) A, a=97.57(1), B=97.52(1), 7=80.29(2), V=1669.04(67) A3, Z=2, Dcalcd=1.667 g/cm3. The structure has been refined to final R of 0.076 and Rw of 0.080, respectively. The complexes have an extended oxamido-bridged structure and consist of Ni(Ⅱ) ion in a square planar environment and Cu(Ⅱ) ion in a distorted octahedral environment.     

动力学电位法测定硼

本文根据硼酸，苯乙醇酸，孔雀绿形成三元离子缔合型配合物的反应，用孔雀绿离子选择性电极监测反应速率，在最佳实验条件下，用固定时间法，电位变化与硼量在０．２－５．０μｇ／ｍＬ范围呈线性关系，用於测定标准钢样和玻璃标样中的硼，结果与标准值十分接近。     

Characteristic features of intra- and intermolecular interactions in crystals of pyrrole-2-carbaldehyde isonicotinoylhydrazone and its hydrate

Pyrrole-2-carbaldehyde isonicotinoylhydrazone (1) and its hydrate [1·H₂O] (2) were studied by single-crystal X-ray diffraction analysis. The introduction of the pyrrole substituent into N"-substituted isonicotinic hydrazide (INH) causes the intramolecular redistribution of the electron density compared to those in INHs studied earlier, which increases the basicity of the hydrazone nitrogen atom (N") involved in intermolecular hydrogen bonding. This effect has not been observed in the structures of N"-substituted INHs and benzhydrazides studied previously. Intermolecular hydrogen bonds play a decisive role in the formation of the crystal structures of 1 and 2.     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

Synthesis of some sulfur-containing pyrido[1,2-α]pyrimidines

4-Methylthiopyrido[1,2-α]pyrimidin-2-one and 2-hydroxypyrido[1,2-α]pyrimidine-4-thione derivatives were synthesized by the addition ofN-(4-R-pyrid-2-yl)acetoacetamides (R = H, Me) to CS₂ under phase-transfer conditions followed by the alkylation of the reaction products with Mel. The molecular structure of 3-acetyl-4-methylthiopyrido[1,2-α]pyrimidin-2-one is established by X-ray analysis.     

Photochemical degradation of hyaluronic acid by singlet oxygen

Changes of the rheological properties of hyaluronic acid (sodium-magnesium salt) solutions after exposure to UV radiation indicate a vigorous decrease in their viscosity, but its still strong shear rate dependence. Whereas the presence of the singlet oxygen sensitizer (anthracene-1-sulphonic acid) brings about a loss of shear dependence; the studied solutions show newtonian behavior.