乙醇在杂多酸上的氧化、脱水和程序升温脱附研究

合成了两个系列具有Keggin结构的12-钒钼磷酸和钨钼磷酸,研究了它们对乙醇氧化、脱水的催化反应。借助程序升温脱附技术研究了反应物及产物乙醇、乙烯、乙醚等在样品上的程脱作用。讨论了钨、钒取代部分钼原于后对杂多酸酸性及氧化性能的影响。     

NdOx作为助催化剂对PtRu/C电催化氧化甲醇活性的影响

采用沉积-还原法制备了PtRu-NdOx/C催化剂, 借助TEM、EDS和XRD等测试手段对其进行了微结构和组成的表征. 结果表明, 催化剂中Pt与Ru以合金形式存在, 而Nd的氧化物则以无定形形态存在. 催化剂粒子的平均粒径在2 nm左右, 晶胞参数为0.3896 nm, Nd氧化物的加入对PtRu合金的晶体结构影响不明显. 采用循环伏安法和计时电流法, 比较了PtRu-NdOx/C催化剂和PtRu /C催化剂对甲醇氧化的电催化活性, 结果表明, 加入Nd的氧化物作为助催化剂能明显提高PtRu /C催化剂对甲醇氧化的电催化性能.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

β-环糊精与N,N''''-二(4-吡啶基甲基)-1,6-己二胺自组装包结行为的研究

以4-吡啶甲醛和1,6-己二胺为原料,合成了含吡啶基的还原双席夫碱客体N,N'-二(4-吡啶基甲基)-1,6-己二胺(C6N4),通过核磁共振技术研究了β-环糊精与C6N4的自组装包结作用,测定了包结比和稳定常数.结果表明,β-环糊精与客体C6N4在水溶液中形成1∶1的包结配合物,其稳定常数的平均值为1.7×102dm3·mol-1.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

一维链状锰配位聚合物[Mn(4-CPOA)(2,2-bipy)(H_2O)]_n的合成与晶体结构(英文)

0IntroductionThe solid-state chemistry of manganese!car-boxylate coordination polymers has received growingattention over the past few years,owing to their fasci-nating network topologies and potential application inthe field of molecular magnetism and bi…     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

KINETIC ANALYSIS OF CO-CONDENSATION POLYMERIZATION OF AB2 AND AB MONOMERS

This work deals with the kinetics of co-condensation polymerization of AB2 and AB monomers, giving expressions of the two-dimensional molecular weight distribution function and the number/weight average molecular weights of the resulting copolymers. The two-dimensional molecular weight distribution depends on two indices, n and l, which are the respective numbers of AB2 and AB units in a copolymer species. The evolution of the two-dimensional weight and z distributions during the co-condensation polymerization has been evaluated systematically. Finally, the two-dimensional distribution was transformed into a one-dimensional molecular weight distribution with only one variable (the molecular weight of the products instead of the degree of polymerization). The calculated results show that the highly branched copolymer has a very broad molecular weight distribution when the co-condensation polymerization approaches completion.     

K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。