CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

LaSrBO4型复合氧化物的合成及其CO氧化活性研究

LaSrBO4(B=Cu、Ni、 Co、 Fe、 Mn、 Cr ) was studied with respect to their preparation, characteristics and catalytic oxidation activity by means of XRD, XPS, electric conductivity and activity evaluation. Results showed that the calcination temperature has great influence on the formation of the phases of such samples, and was associated with the radius of B ion. The greater the B ion radius, the higher the calcination temperature required for the formation of the phases. It was also found that the activity and the relative content of adsorptive oxygen and lattice oxygen on the sample surf are, the activation energy of electron conduction and the CO oxidation activity may vary with different B ions, and demonstrate a dual-peak pattern with the increase in the number of 3d electrons of the B ion.     

基于三阶段SBM模型的中国节能服务上市企业效率研究

节能服务企业效率对于推动节能服务产业发展和确保国家“双碳”目标实现具有重要意义。运用三阶段SBM模型,对2020年60家中国节能服务上市企业的综合效率进行实证研究,并分析效率的影响因素。研究结果表明,经济发展水平对综合效率具有双重影响,合适的产业结构和较高的投入资本回报率有利于综合效率提升,而政府补贴与企业存续时间制约了综合效率改进;剔除环境因素与随机误差影响后,多数企业综合效率下降,整体效率偏低;提高规模效率是提升综合效率的关键,且绝大部分企业处于规模收益递增状态。研究最后提出创新补贴方式、建立企业认证制度、开展综合能源服务和推动企业间兼并重组等可行建议,以提升节能服务企业的综合效率。     

掌握“通技通法”,开拓数学思维——以一道高考真题为例

年年岁岁花相似,岁岁年年人不同.对于空间角的考查,不同空间几何体的载体,不同形式的设问方式,千变万化,视角多样,倍受各方关注.结合一道高考真题,通过分析与解析,对该题进行多视角、多方法、多途径的分析与研究,提升备考层次、深度与广度,引领与指导数学教学与学习.     

超高效液相色谱-串联质谱法测定化妆品中全氟及多氟化合物北大核心CSCD

该文基于超高效液相色谱-串联质谱法(UHPLC-MS/MS),建立了多种类型化妆品中全氟及多氟化合物(PFASs)的分析方法。水剂、膏霜、乳液、凝胶和粉剂样品经过饱和乙酸铵-氯化钠溶液(含1%甲酸)分散后采用1%甲酸-乙腈溶液提取,油状和蜡基类化妆品经过正己烷分散后采用饱和乙酸铵-乙腈溶液(含0.001%氨水)提取,提取液以Agilent RRHD Eclipse Plus Zorbax C_(18)色谱柱(3.0 mm×100 mm,1.8μm)进行分离,在电喷雾离子源(ESI)下以多反应监测(MRM)模式检测,基质匹配外标法定量。通过考察不同前处理方式对30种PFASs回收率的影响,确定最优前处理方法。在优化条件下,30种PFASs在1~250μg/L范围内呈良好线性关系,相关系数(r^(2))为0.9903~0.9998;方法检出限为0.025~0.125μg/g,定量下限为0.050~0.250μg/g,30种PFASs的平均回收率为70.8%~112%,相对标准偏差(RSD,n=6)为0.50%~12%,24 h内各基质溶液中30种PFASs的峰面积相对标准偏差(RSD)均小于10%。采用该方法对采集的88个化妆品样品进行检测,发现1个阳性样品,检出全氟辛酸(PFOA)和全氟辛基磺酸(PFOS)含量分别为4.7μg/g和1.4μg/g。该方法简便、快速、准确、灵敏,可为化妆品的质量控制和日常监管提供技术支撑。     

硅灰石矿物发光原料中Fe2+的去除与CaSiO3∶Eu3+的光谱特性

提出了用草酸．邻菲哕啉去除硅灰石中Fe^2 的方法，研究了浸取剂的浓度、浸取时间和温度等条件对Fe^2 的去除率的影响，在最佳的浸取条件下，Fe^2 的去除率达到98．35％。在去除猝灭剂后的硅灰石矿物中，掺加适量的稀土激活剂Eu^3 ，通过高温固相法制成荧光发光材料，发光强度明显提高，接近于化学试剂合成的发光材料。     

以环糊精为模板剂制备不同粒径CeO2纳米粒子

稀土化合物由于具有许多特殊的性质而引起了世界各国科学家的高度重视.CeO2是一种廉价而用途很广的材料,如用于发光材料、催化剂、电子陶瓷、玻璃的抛光等.尤其,CeO2因具有特殊的储氧和释氧能力而作为重要的助催化剂在汽车尾气催化净化中得到广泛应用[1,2].大量文献研究表明,制     

Synthesis and structure characterization of a novel series of N-alkylphthalimidylaminocarbonylmethoxylcalix [4] arenes

A novel series of N-alkylphthalimidylaminocarbonylmethoxylcalix[4]arenes with the reaction between 4-(N-bromoacetyla- mino)-phthalimide derivatives and calix[4]arene has been synthesized and structurally characterized by IR,~1HNMR and MS.From their analysis data,it was found that compounds 7a-7d adopted a cone conformation.