Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

Photo-initiated base-formation in a polymer matrix

It was found that amines were formed efficiently by the photolysis of O-acyloximes followed by hydrolysis in polystyrene films and the relationship between structures of O-acyloximes and yields of amines were investigated. O-phenylacetyl acetophenone oxime (PaApO), O-pivaloyl acetophenone oxime (PApO), and O-benzoyl acetophenone oxime (BApO) as monofunctional O-acyloximes and O,O′-succinyl diacetophenone oxime (SDApO) and O,O′-glutaryl diacetophenone oxime (GDApO) as bifunctional O-acyloximes were examined. The yields of amines for PaApO and SDApO under N₂ were ca. 70%, which was the highest among O-acyloximes examined in this experiment. On the other hand, the yields for PApO, BApO, and GDApO were less than 15% and it was verified that the hydrogen abstraction by imino radicals via 6-membered cyclic intermediates resulted in the lowering of yields. Although the effect of oxygen under photolysis on the yields of amine for PaApO was negligible under 50% conversion of PaApO, the yield decreased with further increase in the conversion and was 50% at 90% conversion. © 1994 John Wiley & Sons, Inc.     

Alkaline Earth Transition Metal Antimonides AT4Sb12 (A = Ca,Sr, Ba; T = Fe,Ru, Os) with LaFe4P12-Structure

The title compounds were prepared by reaction of CaSb₂, SrSb₂, or BaSb₃ with the transition metals and antimony in sealed silica tubes. They crystallize with the cubic LaFe₄P₁₂-structure, which was refined from single-crystal X-ray data of CaFe₄Sb₁₂, SrRu₄Sb₁₂, and BaRu₄Sb₁₂ to residuals of R = 0.014, 0.016, and 0.014, respectively. The thermal parameters of the alkaline earth ions increase with decreasing ionic size. The Sb? Sb distances are greater in the iron compound than they are in the two ruthenium compounds. This is rationalized to be due to a larger portion of electrons in antibonding Sb? Sb states in the iron compound.     

A comparison of thermoreactive water-soluble poly-N,N-diethylacrylamide prepared by anionic and by group transfer polymerization

Several batches of poly-N,N-diethylacrylamide were synthesized by anionic and by group transfer polymerization (GTP). A radical poly-N,N-diethylacrylamide prepared from the same monomer was also included in the comparison. According to matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) both types of living polymerization resulted in narrow molecular weight distributions with M_w/M_n values below 1.5. Average molecular weights (M_n) between 888 and 4678 g/mol were calculated in these cases. The radical polymer had an average molecular weight (M_n) of approximately 130,000 g/mol. The dry anionic and GTP polymers were investigated by differential scanning calorimetry (DSC) and x-ray diffraction spectrometry. Evidence for partial crystallinity in the solid state was found. The conformation of all polymers was examined by high resolution (600 MHz) NMR. According to these measurements, 75% of the ? CHR? groups of the anionic poly-N,N-diethylacrylamide were located in an isotactic triade. The remaining 25% had heterotactic structure, while no indication for the presence of syndiotactic protons was found. Poly-N,N-diethylacrylamide prepared by GTP, on the other hand, had mainly syndiotactic structure. The aqueous solutions of the polymers showed phase separation upon heating. Whereas the lower critical solution temperature (LCST) was approximately 30°C in the case of the poly-N,N-diethylacrylamide prepared by GTP and by radical polymerization, uncommonly high LCSTs of more than 40°C were observed for the anionic poly-N,N-diethylacrylamide. © 1994 John Wiley & Sons, Inc.     

C2H4-K体系中振动态至电子态传能的研究

用TEA CO_2激光将C_2H_4分子激发到高振动激发态，高振动激发态的C_2H_4分子与基态的K原子碰撞发生振动态→电子态（V→E）传能过程，根据提出的能级组模型，对测得的时间分辨原子荧光信号进行处理，获得温度在453－663 K范围内，C_2H_4-K体系中V→E传能速率的数量级为10~(-10)/cm~3·molecule~(－1)·s~(－1)，对应的碰撞传能截面约为0.30～0.80 nm．随着反应温度升高，V→E传能截面减小．上述实验结果表明碰撞体间吸引相互作用在这种非共振的V→E传能过程中起主要作用．利用多极相互作用势下的碰撞络合物模型对实验结果进行了讨论．     

12-钼磷酸与γ-Al2O3载体的相互作用

应用酸碱滴定、X射线衍射(XRD)、激光拉曼(LRS)和顺磁共振(EPR)等方法研究了磷钼酸(PMo_(12))与γ-Al_2O_3载体间的相互作用．结果表明，PMo_(12)在γ-Al_2O_3上随负载量增加出现三种不同的分散状态，据此提出了PMo_(12)在γ-Al_2O_3上的铺展模型．     

A NEW POLYMER-BOUND 1,2-DIOL AS A PROTECTING AGENT FOR SYMMETRICAL DIALDEHYDE

A novel polymer-bound 1,2-diol, 3-polystyrylsulfonyl-1,2-propanediol (6) had been prepared by the reaction of sodium polystyrylsulfinate with allyl bromide, followed by oxidation and. hydrolysis or directly with 3-chloro-1,2-propanediol in the presence of a phase transfer catalyst, n-tetrabutylammonium iodide. The capacity of resin 6 for terephthaidehyde reached 1.43 mmol/g. The aldehydic groups attached to polymer 6 reacted with hydroxylamine hydrochloride or reduced by sodium borohydride giving p-formylbenzaldoxime (yield: 89%)and p-formyl-benzalcohol (yield: 734%), respectively. The high yields of these polymer-supported reactions showed that the polymer 6 possessed the effective isolation of its reactive sites.     

十二顶点邻位双取代碳硼烷衍生物二阶NLO性质的理论研究

采用密度泛函理论(DFT) B3LYP/6-31G*方法, 对系列十二顶点邻位双取代碳硼烷(C2B10H12)衍生物的几何构型进行优化. 在所得优化结构的基础上, 结合有限场方法(FF)和含时密度泛函理论(TD-DFT)对这些分子的二阶非线性光学(NLO)活性及电子吸收光谱进行了研究. 结果表明, 邻位双取代碳硼烷有较强的吸电子作用, 与有机基团形成D-π-A结构时, 可以起到很好的受体作用. 当给体部分或桥的共轭性好, 给体的给电子能力强时, 邻位双取代碳硼烷的吸电子作用更明显, 从而增强了分子的二阶NLO响应.     

n(Mg)/n(Al)=3的水滑石层板结构及层间距的阴离子调控

利用密度泛函理论(DFT)的B3PW91方法在Lanl2dz水平上研究了镁铝摩尔比为3的水滑石层板分子簇模型[Mg30Al7(OH)72]9+的几何构型, 优化得到的结构参数和采用Reflex模块模拟得到的XRD图谱分别与实验观测结果相符, 由此确定了水滑石层板沿第三维方向的有序堆积, 该结构符合空间群R3m(166), 其晶胞参数a=1.2552 nm, c=2.3400 nm. 进一步构造了具有R3m空间群对称性的Mg-Al-CO32--LDH晶体结构模型, 选取其中的簇模型, 经优化得到了一种稳定构型, 脱除结晶水的水滑石层间距为0.7260 nm, 键参数的变化表明碳酸根离子与层板间存在较强的超分子作用.     

含杯芳烃聚合物的合成与应用

杯芳烃在主客体化学中是继冠醚和环糊精之后被广泛关注的第三代主体分子,能够选择性地与客体分子或离子形成络合物。近年来,含杯芳烃聚合物逐渐受到人们的重视。结合聚合物稳定性好,易于加工的特性,含杯芳烃聚合物将有望被开发成为新型功能高分子材料。本文详细介绍了含杯芳烃聚合物的合成及其应用。