不同方法掺杂Au对纳米α-Fe2O3气敏性能的影响

分别采用共沉淀法、浸渍法、紫外辐照法制备了掺杂不同Au含量的α-Fe2O3纳米粉体,并制作了旁热式厚膜型气敏元件.用XRD、TG-DTA和TEM技术对纳米晶的晶型、晶粒大小及形貌进行了表征.考察了掺杂方法、Au含量及焙烧温度对α-Fe2O3气敏性能的影响.结果表明,采用三种方法掺杂适量Au后,都使α-Fe2O3的气敏性有了显著提高,其中采用共沉淀法,在400℃焙烧的Au质量分数为1.5%的α-Fe2O3的气敏性最佳.     

新型1,2,4-三唑并[3,2-d][1,5]苯并氧氮杂-2-酮的合成

取代苯并二氢吡喃 4 酮 ( 1)的芳腙在冰醋酸中与KNCO发生 [3 2 ]环加成反应 ,加成产物经KMnO4氧化开环得偕偶氮异氰酸酯 ( 3 ) .3在HBF4的催化下发生环化 -重排反应 ,合成得到一系列新型 6 7 5三环系 1,2 ,4 三唑并 [3 ,2 d] [1,5 ]苯并氧氮杂 2 酮 ( 5a～ 5g) .由X单晶衍射测定了化合物 5a的晶体结构     

壳聚糖-聚羟基丁酸酯共混膜的制备与性质

以乙酸为共溶剂,制备了壳聚糖-聚羟基丁酸酯(CTS-PHB)共混膜,利用红外光谱(FT-IR)、广角X粉末衍射(WAXD)、扫描电镜(SEM)及差热分析(DTA)表征了共混膜的化学组成、晶形、形貌和热稳定性能。研究表明:CTS和PHB可在体积百分数为62.5%的乙酸溶液中共混,形成表面光滑、不透明的膜,干态共混膜具备一定的力学强度。各比例的CTS-PHB共混膜有相同的热分解温度,共混膜的形貌特征随两组分质量配比变化,其中mPHB/mCTS=1/1的共混膜显示出良好的有序结构。     

Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and Characterization of ChiralLiquid Crystal CMPPCDP

ＳｙｎｔｈｅｓｉｓａｎｄＣｈａｒａｃｔｅｒｉｚａｔｉｏｎｏｆＣｈｉｒａｌＬｉｑｕｉｄＣｒｙｓｔａｌＣＭＰＰＣＤＰＴＩＡＮＹａｎ－ｑｉｎｇ，ＺＨＡＯＹｉｎｇ－ｙｉｎｇ，ＳＵＦｅｎｇ－ｙｕａｎｄＴＡＮＧＸｉｎ－ｙｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔ...     

1-烃基-1-硅杂环丁烷的合成及其Si—H键伸缩振动频率与结构关系的研究

硅杂环丁烷在有机硅化学中是一类非常重要的小分子环系化合物。由于硅杂环丁烷和环丁烷的环张力相似,因而显示出较高的反应活性。例如能与某些试剂作用,生成开环产物;在光解或热解条件下,产生具有Si=C结构的高活性中间体,可用以合成多种有机硅化合物。     

三线性直接分解法分析高维灰色体系

对于由多个两维测量数据组成的三维阵，本文提出一种新三线性直接分解方法。采用高维ＰＣＡ分解，从三维阵中直接提取抽象光谱和抽象浓度，再结合ＱＺ算法，唯一地确定混合物中各组分光谱的浓度。该方法可以排除其它未知组分的干扰，适用于高维灰色体系定性定量分析和多点校准。用模拟数据讨论了光谱分离度对该方法的影响，应用于混合维生素Ｂ１、Ｂ２和Ｂ６的荧光分析，求得的光谱和浓度与实验值吻合很好。     

Tb~(3 )在MO(M=Ca,Sr)中的长余辉发光

长余辉发光材料的研究与应用,已有近100年的历史,目前仍在许多领域中有着重要应用[1].此类材料与其他光致发光材料具有相同的发光性能,只是更注重其发光的衰减过程和热释光性能.如,ZnS:Cu作为黄绿色的长余辉发光材料,在1992年以前是余辉性能最好的长余辉发光材料,一直处于发光研究工作的中心.     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.