Development of a switchable multidimensional/comprehensive two-dimensional gas chromatographic analytical system

In this study, a new system for analysis using a dual comprehensive two-dimensional gas chromatography/targeted multidimensional gas chromatography (switchable GC × GC/targeted MDGC) analysis was developed. The configuration of this system not only permits the independent operation of GC, GC × GC and targeted MDGC analyses in separate analyses, but also allows the mode to be switched from GC × GC to targeted MDGC any number of times through a single analysis. By incorporating a Deans switch microfluidics transfer module prior to a cryotrapping device, the flow stream from the first dimension column can be directed to either one of two second dimension columns in a classical heart-cutting operation. Both second columns pass through the cryotrap to allow solute bands to be focused and then rapidly remobilized to the respective second columns. A short second column enables GC × GC operation, whilst a longer column is used for targeted MDGC. Validation of the system was performed using a standard mixture of compounds relevant to essential oil analysis, and then using compounds present at different abundances in lavender essential oil. Reproducibility of retention times and peak area responses demonstrated that there was negligible variation in the system over the course of multiple heart-cuts, and proved the reliable operation of the system. An application of the system to lavender oil, as a more complex sample, was carried out to affirm system feasibility, and demonstrate the ability of the system to target multiple components in the oil. The system was proposed to be useful for study of aroma-impact compounds where GC × GC can be incorporated with MDGC to permit precise identification of aroma-active compounds, where heart-cut multidimensional GC-olfactometry detection (MDGC-O) is a more appropriate technology for odour assessment.     

有机/无机复合功能材料倒脊型波导热光开关

利用溶胶-凝胶技术自主合成了一种具有优良光学特性和高热稳定性的有机/无机复合芯层材料.这种功能材料的分子中含有有机柔性侧链,可形成环氧交联.与无机SiO2-TiO2体系相比,具有较高的热光系数(量级为10-4/K),以及更好的成膜性和可加工性.通过与实验室自行配制的P(MMA-GMA)包层材料相匹配,设计制备了基于这种有机/无机复合功能材料的倒脊型波导马赫-曾德尔型热光开关.器件的波导与热电极性能良好.插入损耗为10dB,驱动功率15mW,开关时间小于1ms,消光比15dB.     

Dynamic control of photonic bandgap mediated by vacuum-induced coherence

We theoretically examine the storage and retrieval of a light pulse in a medium comprised of four-level atoms of the V − Λ-type. The two intermediate levels are probed by a weak field and vacuum-induced coherence effects lead the system to transparency. The temporal variation of the intermediate levels' splitting is used as an external parameter which allows the transfer of the impinging field to a combination of spin coherences. An auxiliary and far-detuned control field in a standing-wave configuration is used to induce a variable photonic bandgap by cross-phase modulation. It is shown that dynamic control of such a bandgap can be used to coherently manipulate the previously stored probe pulse. We use a general scheme to take into account multiwave mixing effects and solve the combined Maxwell-Bloch equations for the relevant coherences. It is shown that the system acts as an all-optical router.     

体结构GaAs光导开关实验研究

 为解决光导开关耐受场强的提高问题,研制了2种体结构光导开关,并进行了实验研究。两种开关均由半绝缘GaAs材料制成,一种尺寸为10.0 mm×10.0 mm×0.6 mm,电极位于10.0 mm×10.0 mm面上相对位置,电极直径6 mm;另一种尺寸为15.0 mm×15.0 mm×3.0 mm,8 mm直径电极位于15.0 mm×15.0 mm面上相对位置。测试了第1种开关在不同半高宽脉冲加载电压下的击穿电压,结果表明其最大耐受电压达7.6 kV,击穿电场127 kV/cm。对第2种结构测试了开关在直流加载条件下的暗态伏安特性并进行了触发实验,结果表明在15 kV工作电压下,其放电最大电流超过3.5 kA。     

Blumlein双极脉冲形成线

 为了提高超宽带系统的辐射因子,对超宽带脉冲整形技术进行了深入研究,介绍了采用Blumlein线产生双极脉冲的高功率双极脉冲产生技术。对采用Blumlein线产生双极脉冲的原理进行了讨论,通过数值模拟分析了影响双极脉冲形成的主要因素。设计了一套Blumlein高功率双极脉冲形成线,在800 kV脉冲源上开展了高压实验研究,分析了开关及形成线长度对形双极脉冲的影响。在输入单极脉冲电压为652.0 kV、脉宽为2.1 ns的情况下,Blumlein双极脉冲形成线可以产生负峰电压为571.9 kV、正峰电压为550.4 kV、半周期为740 ps的双极脉冲,峰-峰值电压是入射脉冲峰值电压的1.72倍,辐射因子为4.54 MV。     

快前沿直线脉冲变压器单级模块开关触发时延分散性实验研究

针对12支路并联的快前沿直线脉冲变压器单级模块,给出了模块的电路结构和关键器件参数,实验获得了12只多间隙气体开关的自击穿特性和触发特性。同时,还给出了快前沿直线脉冲变压器模块输出电流的初步实验结果,工作电压150 kV时,次级短路放电电流幅值为235 kA,电流前沿88.2 ns（10%~90%）。次级带0.58 负载情况下,输出电流幅值114.5 kA,电流前沿88.9 ns（10%~90%）。利用微分环测量了12只开关的触发时延分散性,结果表明100次实验开关触发时延分散性近似符合正态分布,开关触发时延分散性对输出电流的影响不大,电流幅值和前沿的标准偏差分别小于2.0%,4.0%,电流波形的畸变主要以平顶为主。     

高功率窄脉宽半导体激光激励器设计

为了获得高功率窄脉宽半导体激光,设计了半导体激光器相应的激励单元,论述MOSFET作为高速开关的工作机理,分析基于MOSFET作为高速开关产生窄的大电流脉冲的电路模型.为了使MOSFET开关速度尽可能快,根据前述分析,提出推挽式MOSFET栅极驱动方式并设计了触发窄脉冲的发生电路.当激光二极管接入放电回路时,实验表明:激光二极管输出光的峰值功率可达67.5 W,脉宽约为20 ns.最后,简要分析了影响光脉冲宽度的因素.     

高温环境中光触发开关的设计

 针对在高温环境中测试仪器的供电方式问题,利用光敏二极管响应时间短并对光灵敏的优点,将其作为供电电源的开关,吸收高温辐射源发出的红外光信号,通过光电转换,使电源导通,达到开关的效果。文中阐述了这种光控的供电方式的理论依据和实现方式,排除了日光等因素的干扰,并对该方法进行了验证。通过试验证明,该方法操作简单,实用性强,很适用于一些不适合人为操作的场合。     

Routing of 2-D switching networks by their embedding into cubes

The proposed all-optical 2-D switching networks are (i) M×N-gon prism switches (M2, N3) and (ii) 3-D grids of any geometry N3. For the routing we assume (1) the projection of the spatial architectures onto plane graphs (2) the embedding of the latter guest graphs into (in)complete host hypercubes (N=4) and generally, into N-cube networks (N3) and (3) routing by means of the cube algorithms of the host. By the embedding mainly faulty cubes (synonyms: injured cubes, incomplete cubes) arise which complicate the routing and analysis. The application of N-cube networks (i) extend the hypercube principles to any N3 (ii) increase the number of plane host graphs and (iii) reduce the incompleteness of the host cubes. Several different embeddings of the intersection graphs (IGs) of 2-D switching networks and several different routings are explained for N=4 and 6 by various examples. By the expansion of the grids (enlargement) internal waveguides (WGs) and internal switches are introduced which interact with the switches of the original 3-D grid without increasing the number of stages (NS). The embeddings by expansion apply to interconnection networks whereas dilation-2 embeddings (dilation ≡ distance of the nearest-neighbour nodes of the guest graph at the host) are rather suitable for the emulation of algorithms. Concepts for fault-tolerant routing and algorithm mapping are briefly explained.     

等离子体断路开关的一维磁流体力学数值模拟

 采用磁流体力学的方法对等离子体端路开关进行了一维数值模拟，通过对给定的进入等离子体的电流波形模型的计算，给出了轴向上等离子体的运动及其不同时刻的密度分布，分析了磁场在等离子体内部的异常渗透过程，指出考虑Hall效应是产生这一异常现象的最为主要的因素。