裂缝性应力敏感油藏流固耦合的数值模拟

以裂缝各向异性全张量渗透率动态耦合渗流模型为基础,建立三维三相裂缝各向异性特低渗透油藏流固耦合数学模型,并运用模块化显示耦合迭代求解建立流固耦合渗流数值模拟方法,编制耦合求解程序.研究表明:对于裂缝性油藏,随着油藏开采过程中压力的变化,岩石变形和储层介质的各向异性应变特性使开发过程中多组裂缝的变形程度不同,引起裂缝渗透率的非线性变化,进而使油藏裂缝渗透率张量主值发生旋转,改变液流方向、影响油藏开发效果.     

非平行板电容器电容计算的修正

在计算非平行板电容器的电场和电容时,以往文献大多忽略分布在电容器外部的电荷.本文将电容器外部电荷纳入计算过程,用三种方法得到更加准确的非平行板电容器电容,较其他文献新增了修正项.     

热压制备(AgSbTe2)100-x-(GeTe)x合金的热电性能

以Pb粉、Te粉、Ag粉、Ge粉为原材料,在真空气氛下合成(AgSbTe₂)_100-x-(GeTe)_x (x=80---90) (TAGS)合金热电材料, X射线衍射(XRD)分析表明,热压烧结后合金具有低温菱形结构. 通过热压烧结法将TAGS粉末制备成块体材料,运用XRD和扫描电子显微镜对材料的物相成分、 晶体结构和形貌进行了表征.采用直流四探针法测定样品的电导率,当样品两端的温差为1---4℃ 的情况下测量Seebeck系数.通过材料热电性能测试,研究了30---500℃温度范围内不同组分 样品性能参数的变化.结果表明,所制备的TAGS热电材料具有纳米结构, 其性能随着组分的变化而变化, TAGS-80具有较好的热电性能,在530℃时具有最高热电优值(ZT=1.80).     

基于平面超材料的Fano谐振可调谐研究

基于两段相同金属分裂环谐振器构成的单层结构, 从理论及实验方面研究了平面超材料的可调谐Fano谐振. 实验测量了平面超材料对TE和TM入射波的电磁响应, 利用电磁波的入射角度控制Fano谐振的强度, 实现了谐振的开关特性, 谐振频率红移可达到21%. 基于有限元法给出了平面超材料的场分布, 强的正常色散表明平面超材料的电磁响应可类比经典电磁诱导透明现象, 仿真与实验结果相符合. 对称结构超材料Fano谐振的开/关特性为超材料性能的可调谐控制提供了有效途径.     

Effects of oxygen vacancy location on the electronic structure and spin density of Co-doped rutile TiO2 dilute magnetic semiconductors

According to density functional theory （DFT） using the plane wave base and pseudo-potential, we investigate the effects of the specific location of oxygen vacancy （Vo） in a （Ti,Co）06 distorted octahedron on the spin density and magnetic properties of Co-doped rutile Ti02 dilute magnetic semiconductors. Our calculations suggest that the Vo location has a significant influence on the magnetic moment of individual Co cations. In the case where two Co atoms are separated far away from each other, when the Vo is located at the equatorial site of a Co-contained octahedron, the ground state of the two Co cations is d6（t3g↑, t23g ↓） without any magnetic moment. However, if the Vo is located at the apical site, these two Co sites have different ground states and magnetic moments. The spin densities are also observed to be modified by the exchange coupling between the Co cations and the location of Vo. Some positive spin polarization is induced around the adjacent O ions.     

First-Principles Calculation for the Electron-Phonon Coupling Constant of Superconducting MgB2

We use a first-principles plane wave method with the new relativistic analytic pseudopotential of the Hartwigsen,Goedecker and Hurter (HGH) scheme and the pseudopotential of the Troullier-Martins scheme to calculate the eleetron-phonon coupling constant λ of superconducting MgB2. The calculated results show that there is a peak at about 300-350cm^-1 in the eleetron-phonon spectral functional α2F(ω), duo to the coupling of the electrons to the acoustic phonon, and the relativistic effect appears in the high frequencies zone. All the results agree well with the present and previous experimental data,     

Thermal Properties of Materials Characterized by Scanning Electron-Acoustic Microscopy

A modified technique of scanning electron-acoustic microscopy is employed to determine thermal diffusivity of materials. Using the dependence of the electron-acoustic signal on modulation frequency of the electron beam, the thermal diffusivity of materials is characterized based on a simplified thermoelastic theory. The thermal diffusivities of several metals characterized by the modified scanning electron-acoustic microscopy are in good agreement with the referential values of the corresponding materials, which proves that the scanning electronacoustic microscopy can be used to characterize the thermal diffusivity of materials effectively. In addition, for micro-inhomogeneous materials, such as biological tissues, the macro-effective （average） thermal diffusivities are characterized by the technique.     

铁电压控谐振器的研究

研究了单端加载铁电叉指电容的微带半波长谐振器的压控特性.铁电材料为LaAlO3衬底上脉冲激光淀积的SrTiO3,叉指电容电极为金.测量了谐振器77K下的压控谐振性能.谐振频率在6GHz左右,70V偏压下的压控频率范围大于180MHz.在10～40V内,谐振频率与偏置电压之间呈良好的线性关系,谐振器的有载Q值为60～90.     

单色仪转角重复精度的相位板衍射准直方法测量

为准确测量上海光源软X射线谱学显微光束线采用的变包含角平面光栅单色仪的转角重复精度,提出了一种新的基于相位板衍射准直技术的测量方法.该方法将半导体激光单模光纤和相位板衍射准直技术结合起来,利用面阵CCD采集图像,通过测量光斑的位移变化确定平面镜和光栅的角度变化.实验表明.该方法可以测量掠入射情况下单色仪联动时的转角重复精度,测量精度可达士0.1",此测量精度优于同等实验条件下的商用ELCOMAT 3000自准直仪的测量精度.     

3C-SiC纳米颗粒量子限制效应的实验证据

报道了关于3C—SiC纳米颗粒量子限制效应的实验证据．将电化学腐蚀3C—SiC多晶靶材得到的多孔材料在水溶液中进行超声处理，制备出发光的3C—SiC纳米颗粒溶液．透射电镜实验表明，所得颗粒直径分布在1-6nm范围，光致发光谱实验给出了存在量子限制效应的实验证据．发光范围在440-460nm．SiC纳米颗粒量子限制效应的发现，为该材料在光电子发光器件中的应用提供了重要的实验基础．