Low generational polyamidoamine dendrimers to enhance the solubility of folic acid:A‘‘dendritic effect’’investigation

Low generational(G0–G2,G for generation) polyamidoamine(PAMAM) dendrimers were investigated as enhancers to improve the aqueous solubility of folic acid at pH 11 and pH 5.In these two cases,the solubility of folic acid increases with both the dendrimer concentration and generation.However,the solubilization mechanism is different.The electrostatic interaction between the primary amines of dendrimers and the ionized carboxylic groups of folic acid dominates the dissolution process at pH 11 while the increase of the solubility of folic acid at pH 5 is attributed to the hydrophobic encapsulation inside the dendrimer molecules.In addition,for comparison ethylenediamine was used as a small molecule control to examine the ‘‘dendritic effect' in the dendrimer-related solubilization process.Interestingly,PAMAM dendrimers exhibit,at pH 5,a significant superiority over ethylenediamine in enhancing solubility,whereas this ‘‘dendritic effect' cannot be observed under the basic condition.     

静电纺丝制备碳纳米管基复合纳米纤维的研究进展

碳纳米管(CNTs)作为增强材料与聚合物复合制成纳米纤维,有助于提高纳米纤维性能,扩展其应用领域。本文综述了近年来国内外静电纺丝制备CNTs基复合纳米纤维的研究现状,重点介绍了CNTs/PAN复合纳米纤维、CNTs/PANI/PEO复合纳米纤维、CNTs/PVA复合纳米纤维、CNTs/PA复合纳米纤维、CNTs/TiO2复合纳米纤维的研究进展及其在纳米传感器、电磁干扰、超级电容器、染料敏化太阳能电池(DSSCs)、组织工程支架、药物控制释放等方面的应用潜力,展望了CNTs基复合纳米纤维的发展前景。     

磷钼酸/PMMA静电纺丝纤维的制备及形貌研究

通过静电纺丝技术制备了磷钼酸/PMMA复合纤维,研究了PMMA的相对分子质量、磷钼酸的含量及混合溶剂中DMF与乙醇的体积比对复合纤维形貌及直径的影响。通过扫描电镜(SEM)对复合纤维的形貌进行了观察,并测试了不同条件纺丝溶液的电导率、黏度和表面张力。研究发现,PMMA的相对分子质量和DMF与乙醇的体积比对复合纤维的形貌影响较为明显,磷钼酸的含量对复合纤维的直径影响显著。较为理想的纺丝条件为:PMMA的重均分子量为60000,纺丝液中磷钼酸的含量为16mg/mL,DMF与乙醇的体积比为6∶4。     

静电纺丝工艺制备纳米抗菌敷料的研究与应用进展

与传统敷料相比,静电纺丝纳米抗菌敷料具有极大的比表面积和孔隙率,既有益于细胞呼吸,又可阻止细菌感染伤口,并能有效增大抗菌药物与伤口中细菌的作用面积而高效杀菌。此外,纳米敷料还能最大程度仿生细胞外基质的结构,有利于加快细胞和组织的生长,促进受损皮肤的恢复,因而非常适合用做皮肤敷料。本文对静电纺丝纳米抗菌敷料的特点,各类基体材料、抗菌药物在静纺抗菌敷料制备中的应用,以及静纺敷料的抑菌效果做了介绍,并对静电纺丝纳米抗菌敷料的应用前景做了展望。     

静电纺丝素/胶原/聚合物复合纤维的制备及其力学性能的研究

目前,将天然高分子蛋白和聚合物共混利用静电纺丝法制作各种组织工程支架材料倍受关注。基于这种研究背景,在本文中利用静电纺丝技术,制备了丝素(SF)/胶原(COL)/聚左旋乳酸(PLLA)和SF/COL/聚左旋乳酸-己内酯(PLCL)两种共混复合纤维膜,通过扫描电镜(SEM)对纤维形态结构分析,发现复合纤维形貌良好,直径较为均一。同时改变纺丝液中高分子蛋白的比例,复合纤维的直径也随之减小。此外,对复合纤维进行了力学性能测试,发现随着聚合物含量的增加,复合纤维膜的力学性能得以改善,SF/COL/PLCL组复合纤维的拉伸性能明显优于SF/COL/PLLA组。     

Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

卟啉化聚合物纤维膜负载TiO_2光催化剂的制备及其光催化性能研究

通过烯基铁卟啉分别和苯乙烯、丙烯腈及甲基丙烯酸甲酯共聚制备三种卟啉化聚合物,然后利用静电纺丝技术将这三种卟啉共聚物与TiO2颗粒共纺制备卟啉共聚物纤维膜负载TiO2光催化剂。扫描电子显微镜(SEM)表征结果显示卟啉共聚物纤维负载TiO2催化剂都具有良好的纤维结构,纤维直径约为1.0-2.0μm。X-射线衍射仪(XRD)则表明TiO2的晶型在纺丝前后都没有受到明显影响。对甲基橙溶液的催化降解实验结果显示:铁卟啉-丙烯腈共聚物负载TiO2催化剂的光催化活性最高,而且铁卟啉的含量对催化剂催化活性起着非常重要的作用。优化后的铁卟啉-丙烯腈共聚物纤维膜负载TiO2光催化剂对甲基橙溶液的脱色率达到76.3%,同时纤维膜结构有利于催化剂的回收和重复使用。     

Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.     

静电纺丝技术在燃料电池中的应用

静电纺丝是一种简单、实用的制造纳米纤维的技术,所需设备少,易于大规模生产。本文主要从催化剂、固体聚电解质膜及膜电极三方面阐述了静电纺丝技术在低温燃料电池中的应用。静电纺丝制得的一维纳米线电催化剂具有稳定的循环性能、优异的传质能力及较低的成本;制备的固体聚电解质膜主要包括Nafion复合膜、阻醇膜及耐温膜,其性能相对于传统的Nafion膜得到了进一步提升,而且,通过采用静电纺丝技术,使膜电极结构得到了优化。最后,对静电纺丝技术在低温燃料电池应用过程中可能存在的问题及其未来的发展趋势进行了展望。     

液相色谱-四极杆-静电轨道阱高分辨质谱法测定保健食品中11种磷酸二酯酶抑制剂

保健食品样品用50%(体积分数)甲醇溶液超声提取15 min,提取液用水定容至50.0mL,离心,取上清液,经0.22μm微孔滤膜过滤,采用液相色谱-四极杆-静电轨道阱高分辨质谱法测定滤液中11种磷酸二酯酶抑制剂的含量。以Waters HSS T3色谱柱为固定相,以不同体积比的0.1%(体积分数)甲酸溶液和乙腈的混合液为流动相进行梯度洗脱,质谱分析中采用电喷雾离子源正离子模式和全扫描模式。11种磷酸二酯酶抑制剂的质量浓度均在2~100μg·L^-1内与其对应的峰面积呈线性关系,测定下限(10S/N)为0.02~0.5μg·L^-1。以空白样品为基体进行加标回收试验,所得回收率为75.7%~98.9%,测定值的相对标准偏差(n=6)为5.9%~14%。