Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.     

光纤松耦合型传感器特性研究

本文介绍一种实用的光纤传感器,它由二根光纤或多根光纤紧靠一起,并在同一位置除去局部包层,成为松耦合状态,在这种状态下,研究了它的特性和应用。 当耦合间隙中充满某种液体介质时,耦合效率明显增大,因此可以方便地判别该介质是否存在。并且实验证明了一种光纤只能有一种相近于光纤芯子折射率的介质具有最大的灵敏度。当间隙内的介质不变时,耦合功率的大小决定于耦合距离d和耦合长度l,l一旦决定以后,d的调节精度为0.1mm量级,易于在机械结构上实现线性检测。     

平行光栅对在刻线不平行时的色散研究

 利用三维空间光线追迹法，分析了啁啾脉冲放大系统中的压缩光栅对，在刻线不平行而光栅面平行时光的衍射特性。导出了此时光通过光栅对的群延时，数值计算了系统2阶和3阶色散量，以及这些色散量在光栅对严格平行时的相对误差。得出了中心波长光的接收位置相对于光栅对严格平行时的偏移量，并且分析了它与入射角的变化关系。     

光纤传感器低温啁啾现象的分析

介绍了光纤光栅传感原理,依据传感机理制作了两种结构材料的光纤光栅传感器,对它们进行了试验,将试验后的传感数据进行了拟合分析和比对,并对它们在低温环境下产生的啁啾现象进行了分析,验证了采用预拉工艺对解决啁啾现象的可行性。     

一种高稳定性光纤F-P标准具的设计

法布里-珀罗(F-P)标准具广泛应用于光纤通信与光纤传感领域。实心标准具受自身材料的限制,无法满足高稳定性的要求。空气隙标准具采用热膨胀系数极低的垫片,提高了器件的温度稳定性能。介绍了低温漂光纤F-P标准具的设计和制作,出射光自由光谱范围为100GHz,损耗为3dB,0~70℃温度漂移小于3GHz。相比于采用传统方法制作的标准具,该光纤F-P标准具稳定性更高,解决了实心标准具折射率和热膨胀变化大的问题。     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

High-sensitivity long-period fiber grating sensor with SAN/cryptophane A for coal mine gas detection

A high-sensitivity long-period fiber grating （LPFG） methane sensor that contains a compact and uniform styrene-acrylonitrile （SAN）/cryptophane A nanofilm is presented. The sensor is prepared by using an automatic dip-coater in a solution of cryptophane A, SAN resin dissolved in ortho-dichlorobenzene, a low- volatile solvent. The effect of film thickness on the LPFG＇s resonant wavelength is thoroughly investigated. The optimum sensor among the three LPFGs with different film thicknesses is directly used to detect the methane concentration in a coal mine gas sample. The results indicate that the sensors with film thicknesses of 484 to 564 nm exhibit a redshifted resonant wavelength when the methane concentration is increased from 0% to 3.5% （vol）. The data demonstrates that the sensor with a film thickness of 484 nm has remarkable sensitivity （~0.633 nm%-X）, and its detection limit can reach 0.2%. The methane concentrations determined by our sensor are consistent with those obtained by gas chromatography.     

线缆系统电磁脉冲效应测量系统研制和试验

分析了实验室瞬态X射线产生的系统电磁脉冲(SGEMP)效应测试所面临的技术问题,提出了解决方法、措施以及实验室模拟瞬态X射线的SGEMP模拟试验方法。通过电子屏蔽、电磁屏蔽、光电隔离、信号对称提取等特殊技术处理,解决了SGEMP效应模拟试验方法和测量系统抗X射线、抗电磁辐射等技术问题,并在大型瞬态X射线模拟源上,测出了瞬态X射线辐照时金属腔内线缆的SGEMP效应波形及幅值。     

面向Li原子D1线频率测量应用的掺铒飞秒光纤光梳系统

报道了自主研制的面向Li原子D1线频率测量应用的掺铒飞秒光纤光学频率梳,包括飞秒激光源,频率探测及控制单元,光谱展宽及拍频单元.光纤光梳系统中飞秒激光光源是一套基于非线性偏振旋转锁模机制的掺铒飞秒光纤激光器,重复频率为196.5MHz,中心波长为1 572nm.利用f-2f法探测载波包络相移频率,获得信噪比约为40dB的信号(分辨率带宽300kHz).改变飞秒激光光源泵浦控制载波包络相移频率、频率稳定度是3.74×10-18/τ1/2;通过电光晶体和压电陶瓷改变飞秒激光光源腔长来控制重复频率frep、频率稳定度是1.75×10-13/τ1/2.利用高非线性光纤和倍频晶体将光纤光梳直接输出光谱由1 520～1 607nm扩展到671nm,获得了单模功率为208nW的光信号.与671nm单频激光拍频产生约为60dB(分辨率带宽1Hz)信号,满足Li原子D1线频率测量实验的需求.