Suppressed formation of CO2 and H2O in the oxidative coupling of methane over La2O3/MgO catalyst by surface modification

Oxidative coupling of methane (OCM) is a promising way to convert methane into C_2 hydrocarbons. However, CO_2 and H_2O are by-products of the reaction. To utilize the higher activity of lanthanum oxide and save its usage, MgO supported La_2O_3 catalyst was prepared. Surface modification of the catalyst with nitric acid was made to suppress the formation of the by-products. Experimental results indicated that the addition of nitric acid increased the surface oxygen species with binding energy of ca. 531.7 eV and at the same time reduced the pore volume of the catalyst. These effects of nitric acid finally led to the increase of C_2 selectivity and the decrease of the by-products formation. Hydrogen selectivity was found about 14%- 18% over the catalysts adopted in this work.     

稀有酮糖中间体的合成

以全苄基保护的糖酸内酯为原料,通过正丁基锂/二碘甲烷生成的碘甲基锂试剂对底物羰基加成增长碳链,再在碱性环境中水解合成了5个稀有酮糖中间体,其结构经NMR确认。     

Non-isothermal Decomposition Mechanism and Kinetics of LiClO4 in Nitrogen

The non-isothermal decomposition kinetics of LiClO4 in flow N2 atmosphere was studied.TG-DTA curves show that the decomposition proceeded through two well-defined steps below 900°C,and the mass loss was in agreement with the theoretica1 value.XRD profile demonstrates that the product of the thermal decomposition at 500°C is LiCl.For the decomposition kinetics study,the activation energies calculated with the Friedman method were considered as the initial values for non-linear regression and were used for verifying the correctness of the fitted models.The decomposition process was fitted by a two-step consecutive reaction:extended Prout-Tompkins equation[Bna,f (α) is (1?α)nα a] followed by a 1th order reaction(F1).The activation energies were (215.6±0.2) and (251.6±3.6) kJ/mol,respectively.The exponentials n and a for Bna reaction were (0.25±0.05) and (0.795±0.005),respectively.The reaction types and activation energies were in agreement with those obtained from the isothermal method,but the exponentials were optimized for better fitting and prediction.     

固相萃取-石墨炉原子吸收法光谱分析铝合金中痕量铍的研究

建立了固相萃取-石墨炉原子吸收光谱法测定铝合金中铍的方法。利用偶氮砷酸类试剂7-(2′-胂酸基-5′-羧酸)苯偶氮-8-羟基喹啉-5-磺酸(H2L)与Be2+形成螯合物,该螯合物可用C18固相萃取柱富集,而Al3+则不被保留。采用石墨炉原子吸收光谱法(GF-AAS)测定C18柱洗脱液中的Be2+的螯合物,从而实现铝合金中铍的分离检测。最佳实验条件为:采用pH=3.0的5%H2L水溶液螯合Be2+,水相上柱,用2mL体积比为50%的甲醇/水溶液作为洗脱液。结果表明:经过C18柱固相萃取可以去除Al3+的干扰,Be2+的测定范围为0.05～16μg/L,检出限为0.025μg/L,加标回收率为92%～108%。应用该法于铝合金标样中铍的测定,结果与认定值相符。     

2,3,7-三羟基-9-(2,4-二羟基)苯基荧光酮荧光猝灭法测定锰(Ⅱ)

在pH=9.33的NH3.H2O-NH4Cl缓冲介质中,于表面活性剂溴化十六烷基三甲铵(CTMAB)存在下,利用Mn(Ⅱ)与2,3,7-三羟基-9-(2,4-二羟基)苯基荧光酮(DHPF)形成Mn(Ⅱ)-DHPF-CTMAB三元配合物可产生荧光猝灭,建立了荧光猝灭法测定痕量Mn(Ⅱ)的新方法。该体系激发波长λex=520nm,发射波长λem=540nm,荧光猝灭值与Mn(Ⅱ)的含量在0～0.36μg/25mL范围内呈线性关系,检出限为0.02μg/25mL,在CTMAB存在下,配合物摩尔比Mn(Ⅱ)∶DHPF=1∶2。拟定方法用于测定尿样中微量锰的含量,结果满意。     

硫代二草酰二(3,5-二甲基嘧啶)锰配合物的合成及其与DNA的相互作用

以4,6-二甲基-2-巯基嘧啶和草酰氯为原料合成了硫代二草酰二(3,5-二甲基嘧啶)(L)及其锰配合物;采用红外光谱、紫外光谱、核磁共振谱对其结构进行了表征,同时研究了锰配合物与DNA的相互作用.结果表明,锰配合物的阳离子与DNA磷酸基团的氧负离子形成静电结合.     

大黄酸键合硅胶固定相的简便制备及色谱性能评价

以大黄酸为原料,γ-氨丙基三乙氧基硅烷(KH-550)为偶联剂,简便制备了一种新型羧基键合硅胶固定相(RBSP),并用红外光谱、热重分析及元素分析对其结构进行表征.考察了流动相中甲醇含量对键合固定相色谱性能的影响,并以含酸性、中性和碱性化合物的混合物为溶质,评价了RBSP的色谱性能.以甲醇-水为流动相,用C18柱作参比,研究了该键合硅胶作为HPLC固定相对两种大豆异黄酮化合物和几种生物碱基的分离,并对其色谱分离机理进行了初步探讨.实验结果表明,该固定相(RBSP)具有较好的反相色谱性能,同时由于键合相中含有酚羟基及酰胺基团,能为多种溶质提供作用位点,对极性化合物的分离具有明显优势,且分离速度快,可有效用于极性化合物的分离分析.     

H_3PO_4/Zr(OH)_4高效促进NBS对取代烷基苯的亲电溴代

使用固体酸H3PO4/Zr(OH)4催化NBS对取代烷基苯进行苯环溴代反应.根据不同取代烷基苯的反应活性,在乙腈中,高产率(79%～96%)地得到了相应的苯环单溴代产物,同时反应体系中无苄位溴代的副产物生成.在反应过程中,固体酸催化剂可以重复使用多次.     

基于甘油三酸酯的高分子材料 Ⅰ.聚酯和聚氨酯

甘油三酸酯是一种可再生资源,可以从向日葵、棉花、亚麻籽等植物中提取得到。甘油三酸酯制造高分子材料可通过许多方法,如:缩合反应、自由基反应、阳离子聚合反应等。文章综述了基于甘油三酸酯的高分子材料的研究进展。     

X射线荧光光谱法测定农田底泥中8种元素

建立X射线荧光光谱法测定农田底泥样品中砷、铬、铜、锰、镍、铅、锌、铁8种元素含量的分析方法.以塑料环粉末压片法制样,选用50种土壤、水系沉积物标准物质拟合校准曲线,探讨各元素的测定条件.当待测样品与建立校准曲线的标准样品粒径均小于75μm时,能够有效减少矿物效应和粒度效应的影响,从而提高检测准确度;各元素在各自的含量范...