钼酸锰/氮化碳纳米复合材料修饰电极检测甲硝唑

采用水热法制备了钼酸锰/氮化碳纳米复合材料(MnMoO₄/g-C₃N₄),通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)和扫描电镜(SEM)等表征了复合材料的表面形貌特征及其结构。利用滴涂法将MnMoO₄/g-C₃N₄修饰于玻碳电极(GCE)表面,构建了检测甲硝唑(MNZ)的电化学传感器。采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了MnMoO₄/g-C₃N₄/GCE电极的电化学行为,考察了pH值和扫描速率等参数对电流响应的影响。在优化条件下,此修饰电极检测MNZ的线性范围为0.5～2400μmol/L,检出限(LOD, 3σ/k)为1.33 nmol/L,并具有良好的选择性、稳定性和重现性。将此传感器用于检测鸡蛋和牛奶中的MNZ,加标回收率分别在97.7%～103.7%和96.9%～102.4%之间,相对标准偏差(RSD)为1.1%～2.2%,表明所制备的MnMoO     

基于苯磺酸和2，2'-联吡啶双配体的锰配合物的结构及其催化Mannich反应性能和机理

由溶剂热法合成了 2 个锰的超分子配合物[Mn₂(2,2''-bipy)₄(H₂O)Cl₃](L₁)·6H₂O (1)和[Mn(2,2''-bipy)₂(H₂O)Cl](L₂)·3H₂O (2)(L₁^-=对甲基苯磺酸根,L₂^-=间硝基苯磺酸根,2,2''-bipy=2,2''-联吡啶),并用单晶X射线衍射、红外光谱、热重分析和氮气吸附-脱附测试对其进行了表征。以Mannich反应为探针,研究了2种配合物的催化性能,并通过对比2种配合物的扫描电镜和粉末X射线衍射表征结果,分析了配合物结构对其催化性能的影响。最后通过密度泛函理论预测了配合物的活性位点,利用X射线光电子能谱证明了活性位点的活化作用,进而阐述了配合物催化Mannich反应的机理。     

大环镍(Ⅱ)配合物与扁桃酸的手性识别

外消旋大环镍(Ⅱ)配合物[Ni (rac-L)](ClO₄)₂分别与l-和d-扁桃酸阴离子在乙腈/水溶液中反应,通过手性识别得到六配位的[Ni (_RR-L)(S-Man)]ClO₄(1)和[Ni (SS-L)(R-Man)]ClO₄(2)对映异构体(L=5,5,7,12,12,14-六甲基-1,4,8,11-四氮杂环十四烷,Man=扁桃酸)。当[Ni (rac-L)](ClO₄)₂与dl-扁桃酸阴离子反应时得到一对对映体等量存在的共聚物,其中大环配体中RR和SS构型分别优先与l-和d-Man^- 配位形成外消旋混合物,反应过程中发生了手性识别现象,每颗晶体均为手性对映体。当[Ni (rac-L)](ClO₄)₂分别与结构类似的dl-2-苯基丙酸和dl-托品酸阴离子反应时,分别得到化合物[Ni (rac-L)(dl-PPA)]ClO₄(3)(PPA=2-苯基丙酸)和[Ni (rac-L)(dl-Tro)]ClO₄(4)(Tro=托品酸)。X射线单晶衍射结果表明,4个配合物中Ni (Ⅱ)离子均与折叠大环配体L的4个氮原子和2个来自羧基与羟基的氧原子(1和2),或羧基氧原子(3和4)顺式配位,形成六配位八面体构型。配合物1和2属于一对对映异构体,分别通过[Ni (_RR-L)(S-Man)]⁺和[Ni (SS-L)(R-Man)]⁺分子间氢键作用形成一维之字形链状结构。配合物1和2的单手性特征与圆二色(CD)谱测定结果一致。     

以5-(3-吡啶基)-1H-吡唑-3-羧酸为配体的钴共晶配合物的合成、晶体结构及电化学性质

采用溶剂热法合成了一种新型的钴（Ⅱ）基配合物,即{[Co（Hppc）₂][Co₂（4,4''-bipy）（H₂O）₄]（SO₄）₂·2H₂O}_n （1）,其中H₂ppc=5-（3-吡啶基）-1H-吡唑-3-羧酸,4,4''-bipy=4, 4''-联吡啶。配体H₂ppc是由吡啶环、吡唑环和羧基共同组成,同时兼具了刚性和柔性。通过单晶X射线衍射对配合物1进行了结构测定。结果显示所合成的配合物1结晶在单斜晶系C2/c空间群,包括2个晶体学独立部分：二维层状[Co（Hppc）₂]和一维链状[Co₂（4,4''-bipy）（H₂O）₄]^2-,并形成具有{4⁴·6²}{4}₂拓扑网络结构的共晶化合物。此外,配合物1呈现出良好的电化学发光（ECL）性能以及良好的超级电容器性能。     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

6，6＇－二（二苯基氧化膦甲基）－1，1＇－氮氧化－2，2＇－联吡啶与硝酸铒配合物的合成与结构

合成了硝酸铒与四功能团含磷萃取剂６，６＇－二（二苯基氧化膦甲基）－１，１＇－氮氧化－２，２＇－联吡啶的配合物。用四圆衍射仪测定了配合物的晶体结构。晶体属单斜晶系，空间群Ｃ２／ｃ，晶体学参数，ａ＝１．９８３０（４）ｎｍ，ｂ＝２．３１３５（４）ｎｍ，ｃ＝１．８６００（３）ｎｍ；β＝９６．１８（２）°，ｚ＝４。配合物中有机配体以四齿形式与中心离子铒配位，金属离子的配位数为８。配位几何构形为稍变形的四方反棱柱。金属离子周围的配位水分子已全部被取代。     

结晶聚合物品相相容性的研究

通过ＤＳＣ、Ｘ－射线衍射、红外光谱及拉伸试验研究了ＨＤＰＥ与ＬＬＤＰＥ、ＨＤＰＥ与ＬＤＰＥ之间的晶相相容性．结果表明，链结构相近的ＨＤＰＥ和ＬＬＤＰＥ的晶相相容性好，能形成共晶；而链结构差异较大的ＨＤＰＥ和ＬＤＰＥ的晶相相容性较差，倾向于分别结晶，但有部分链段被对方的晶区夹持．不论是支化度大的ＬＤＰＥ链段插入以ＨＤＰＥ为主的晶区，还是支化度小的ＨＤＰＥ链段插入以ＬＤＰＥ为主的晶区，都可破坏晶区的规整性．共晶的形成使共混物的熔点、结晶度、晶粒体积等低于两组份的线性加和，而力学性能，尤其是断裂伸长率，则显著提高，呈协同效应．     

1－N－（苯并咪唑－1－乙酰基）－4－苯基－3－氨基硫脲金属配合物的合成及结构表征

合成了新配体１－Ｎ－（苯并咪唑－１－乙酰基）－４－苯基－３－氨基硫脲（ＢＰＭＳ），将其与Ｍｎ（Ⅱ）、Ｃｏ（Ⅱ）、Ｎｉ（Ⅱ）、Ｃｕ（Ⅱ）、Ｃｄ（Ⅱ）、Ｚｎ（Ⅱ）、ＵＯ２（Ⅱ）等金属的醋酸盐反应，合成了７个新配合物。所有化合物均经元素分析、ＩＲ、１ＨＮＭＲ和热重分析等表征。红外光谱表明，配体以四齿方式通过烯醇式羰基氧原子、烯醇式硫羰基硫原子以及Ｃ＝Ｎ１和Ｃ＝Ｎ２的氮原子与金属配位     

铜（Ⅱ）－4－（吡啶－2′－甲基）－1，4，7，10－四氮杂环十三烷－11，13－二酮－α－氨基酸（5－取代邻菲罗啉）三元配合物的稳定性研究

用ｐＨ法在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３条件下，测定铜（Ⅱ）－４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮－α－氨基酸（５－取代邻菲罗啉）三元配合物的稳定常数；比较了带吡啶甲基二氧四胺大环配体和二氧四胺大环配体与Ｃｕ（Ⅱ）的配位能力、配位方式；研究了该三元体系配合物稳定性与配体α－氨基酸酸碱强度之间的直线自由能关系；探讨了Ｃｕ（Ⅱ）和５－取代邻菲罗啉之间的ｄ－ｐ反馈π键以及邻菲罗啉取代基Ｈａｍｍｅｔｔ诱导效应与该三元配合物稳定性之间的关系。讨论了４－（吡啶－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮和４－（喹啉－２′－甲基）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮与Ｃｕｘｐｈｅｎ所形成配合物的不同空间结构及其对配合物稳定性产生的影响。     

Eu（TTA）3·1／2（4，4′－bipyN_2O_2）配合物的发光光谱

在７７Ｋ下测定了Ｅｕ（ＴＴＡ）３·１／２（４，４′－ｂｉｐｙＮ２Ｏ２）配合物的激发光谱、发光光谱和时间分辨光谱。光谱数据表明，在标题配合物中存在化学环境不同的两种Ｅｕ３＋格位，但它们的局部对称性都属于Ｃ２Ｖ点群，这可能表明该配合物的激发态电子结构稍有不同