透明导电氧化物的原理、问题与研究分析

现代光电子产品和能源技术都大量使用透明导电氧化物(TCO)薄膜.由于太阳能电池、平板显示器、发光二极管、短波长激光器、节能玻璃窗等应用领域日益增长的需求,TCO薄膜获得了越来越广泛的应用.文章总结了TCO薄膜的功能原理、应用需求和当前的研究方向,重点分析了p型TCO薄膜研究所要解决的关键问题(其中包括掺杂非对称性,性能退化与缺陷的生成,结构和变化的关系),指出了p型TCO薄膜制备的关键因素,研究的热点问题和蕴藏的研究机会.     

碳纳米管透明导电薄膜的可控制备

碳纳米管具有优秀的导电性能、 透光性能和十分突出的柔性, 在柔性透明导电薄膜中有着良好的应用前景. 如何制备同时拥有良好导电性能和透光性能的碳纳米管薄膜是这一领域研究的核心问题. 本综述介绍了碳纳米管薄膜的制备方法, 并重点讨论了基于漂浮催化剂化学气相沉积法的碳纳米管薄膜的可控制备. 在生长过程中限制碳纳米管的团聚、 增加碳纳米管的长度、 降低杂质的含量是提高碳纳米管薄膜性能的主要策略.     

石墨烯玻璃透明薄膜加热特性

Graphene has become a research focus in recent years owing to its excellent characteristics, and glass is a commonly used material with high transparency and low cost. Graphene glass combines the excellent properties of both graphene and glass; graphene glass has not only high thermal conductivity, high electrical conductivity, and good surface hydrophobicity but also exhibits superior electrothermal conversion and wide-spectrum high-light-transmittance characteristics. Therefore, the study of graphene glass films is of theoretical value and practical significance. In this study, a high-purity glass-based (JGS1 quartz glass) multilayer graphene film was developed based on an atmospheric-pressure chemical vapor deposition (APCVD) method, and its electrical characteristics, light transmittance, and electrical heating characteristics were experimentally investigated in detail. The results show that graphene glass with different surface resistance values obtained through direct growth on a high-purity quartz glass substrate using the APCVD method, not only has excellent uniformity and quality, but also has considerably flat and high transmittance across the entire visible light region and exhibits excellent heating performance and fast response time. For graphene glass with a surface resistance of 1500 Ω·sq^-1, the light transmittance can reach 74%, and the saturation temperature can rise to 185 ℃ by applying a bias voltage of 40 V. In addition, when the resistance value of the graphene glass is 420 Ω·sq^-1, the graphene glass reaches a high saturation temperature of 325 ℃ in 40 s, and the corresponding heating rate can exceed 18 ℃·s^-1, achieving a significantly higher heating rate than other heating films at the same voltage. Compared with the polyethylene-terephthalate- (PET-) based and silicon-based graphene films obtained by the transfer, graphene glass has a higher saturation temperature, shorter thermal response time, and faster heating rate. Furthermore, graphene glass exhibits better heating cycle stability and longer-term heating stability at a constant voltage. In addition, an experiment using the graphene glass to thermally tune the wavelength of a vertical-cavity surface-emitting laser was conducted and gave good results. The position of the laser peak controlled by the graphene glass was red-shifted by 1.78 nm by applying a voltage of 20 V, and the wavelength tuning efficiency reached 0.059 nm·℃^-1. Compared with PET-based and silicon-based graphene films, the actual electrical heating capacity of graphene glass increased by 195%. These experimental findings demonstrate that graphene glass transparent films with excellent electric heating characteristics can be used in various transparent electric heating fields and have relatively wide application prospects.     

调制激光场中Rydberg原子的电磁感应透明

本文主要研究了调制探测激光场中铯Rydberg 原子阶梯型三能级系统的电磁感应透明(EIT) 效应. 铯原子基态6S_1/2, 第一激发态6P_3/2 和Rydberg 态形成阶梯型三能级系统, 探测光作用于6S_1/2 (F = 4)→6P_3/2(F' = 5) 的跃迁, 耦合光在Rydberg 跃迁线6P_3/2→49S_1/2 附近扫描, 形成Rydberg 原子EIT. 当对探测光频率施加一个几kHz 的调制时, 调制解调后的EIT 信号分裂为两个峰, 双峰间距与调制频率无关,而与调制幅度导致的失谐量大小(频率调制幅度) 成正比, 双峰间隔的一半等于探测光频率调制幅度的λ_p/λ_c = 1.67 倍. 实验结果与理论计算相一致. 本文的研究结果可应用于激光线型和频率抖动的实时监测.     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

交叉克尔非线性对二阶非线性诱导透明的影响

考虑耦合介质存在交叉克尔非线性的情形下,研究了交叉克尔效应对耦合双谐振腔中二阶非线性诱导透明的影响.首先给出了描述体系理论模型的哈密顿量,再通过对海森堡-朗之万方程进行线性化,得到了探测场的透射率,进而得出系统的吸收和色散关系.研究结果表明,在交叉克尔非线性强度较小时,可忽略其对诱导透明的影响;随着交叉克尔非线性强度的增大,诱导透明窗口宽度随之快速变窄.此外,吸收曲线中还出现了双吸收峰.进一步增强交叉克尔非线性,导致原本出现的诱导透明消失,并在新吸收峰处产生了新的诱导透明,新的诱导透明的吸收零点位置随着交叉克尔非线性增加而向左偏移.这些结果可能在不透明介质的窄窗口光传输和提高光学腔的性能方面提供一些参考.     

高效透明导电膜荧光屏的研究

介绍了一种新型荧光屏结构,采用透明导电膜代替传统荧光屏中的铝膜作电极.分别测试了新型荧光屏和传统荧光屏的加电特性.实验结果表明新型荧光屏具有较高的耐压性能,对提高X射线变像管的空间分辨率有重要作用,而且能延长变像管的寿命.采用透明导电膜制作荧光屏还具有工艺简单,成本低和成品率高的优点.     

基于激光多普勒测振仪的透明固体二维动态应力场测量

基于激光多普勒测振仪的透明固体二维动态应力场测量     

透明导电电极对聚合物太阳能电池光学性能的影响北大核心CSCD

采用传输矩阵法研究了基于MoO3/Ag/MoO3(MAM)透明导电电极和ITO电极的聚合物太阳能电池的光学性能。分别对电池耦合层厚度、活化层厚度和金属电极进行了优化,得到了优良效率的结构。结果表明,MAM与ITO有机太阳能电池在不同活性层厚度和不同光学间隔层厚度条件下有明显的光学性能差异;对于薄活性层MAM电极器件(100nm),最大短路电流密度可达到16.85mA/cm^2,比ITO器件提高了7.3mA/cm^2,而对于厚活性层MAM电极(270nm),ITO电极器件的光学性能明显优于MAM器件;还通过改变光学间隔层LiF的厚度进行计算,得出本仿真条件下两种结构性能差异的临界光学间隔层厚度为30nm。