PREPARATION OF PERFLUOROOCTANOYL-MODIFIED POLY(VINYL-ALCOHOL)S AND THEIR ADSORPTION AT AN AIR-WATER INTERFACE

Perfluorooctanoyl modified poly(vinyl alcohol)s (FPVA) were prepared by means of substituting a small amountof hydroxyl groups on the backbone of poly(vinyl alcohol), for which the initial degree of polymerization is equal to 1750.The substitution extent, defined by the number of substituting units in a chain, for the four FPVA samples was in the range of0.5-5 perfluorooctanoyl groups per chain. The FPVA samples with the highest substitution extent still had good solubility inwater. It was shown by experimental measurement at 30.0±0.1℃ that the surface tension of the aqueous solution of thehighest substituted FPVA decreased to 16.6 mN/In at a higher concentration, e.g about 0.1 g/mL. Obviously,macromolecules of FPVA exhibit a very strong tendency to adsorb at the air-water interface, because the hydrophobicperfluorooctanoyl groups in FPVA have a very high surface activity as they are in small molecular fluorinated surfactants.The chain conformation of such a model polymer adsorbed on the air-water interface was also discussed.     

SYNTHESIS AND CHARACTERISTICS OF POLY(ARYLENE ETHER DIKETONE)S

Poly(arylene ether diketone)s were prepared by the aromatic nucleophilicdisplacement reaction of 4,4'-difluorobenzil with different bisphenols in the presence of an-hydrous potassium carbonate in diphenylsulfone at elevated temperature. The polymersobtained had inherent viscosity of 0.51 ～ 0.63 dL/g, and exhibited glass transition temper-ature ranging from 136 ～217℃ mainly depending on the bisphenols used in the polymersynthesis. Thermogravimetry of these polymers showed excellent thermal stability, indi-cating that 10% weight losses of the polymers were observed in the range above 428℃ and438℃ in air and nitrogen, respectively. The mechanical properties of these polymers werealso described and the permeability of five polymers for H_2, O_2 and N_2 was determined at30℃.     

O(3P)原子和硅烷化学反应动力学研究

本文报道了用流动放电-化学发光技术测定O(~3P)和硅烷化学反应速率常数.在293—413K范围内, 结果为k=(1.05±0.36)×10~(-10)exp[(-3.06±0.10) kcal·mol~(-1) /RT] cm~3·molecule~(-1)·s~(-1)并用过渡态理论将上述实验结果外推到200—2000 K范围内. 计算结果以三参数公式表示为: k=7.67×10~(-19) T~(2.59) exp(-720 cal·mol~(-1)/RT) cm~3·molecule~(-1)·s~(-1).     

瓜环与2,2''''-联吡啶衍生物的相互作用

利用~1H NMR技术、紫外吸收光谱及荧光光谱方法,考察了对六、七以及八元瓜环与多种2,2'-联吡啶衍生物相互作用形成的主客体配合物结构及光学性质.研究结果显示,不同的2,2'-联吡啶衍生物与瓜环作用不仅形成多种不同包结比的稳定包结配合物,且所形成的主客体包结配合物的结构及光谱性质也各不相同;同时用几种方法协同考察起到了互为补充、互为验证的良好效果.     

Fe3(CO)12与P(NEt2)2Cl的反应--两核和三核铁羰基簇合衍生物的合成和晶体结构

Fe_3(CO)_(12)与配位基前体P(NEt_2)_2Cl反应,给出4个新的两核和三核铁羰基簇合衍生物:Fe_2(CO)_6(μ-Cl)[μ-P(NEt_2)_2](Ⅰ),Fe_2(CO)_6[μ-P(NEt_2)_2]_2(Ⅱ),Fe_3(CO)_9(μ-CO)(μ_3-PNEt_2)(Ⅲ)和Fe_3(CO)_9(μ_3-PNEt_2)[P(NEt_2)_3](Ⅳ)。在反应期间,配前体分子中的P-Cl和P-N键劈开,形成的分子片Cl、PNEt_2、P(NEt_2)_2和P(NEt_2)_3作为配体与铁羰合物重新组建成上述簇合物。利用X射线衍射法测定了它们的晶体结构。Ⅰ属三斜晶系,P1空间群,晶胞参数a=0.8745(6)nm,b=0.9601(7)nm,c=1.3996(10)nm,α=74.131(11)°,β=79.480(12)°,γ=69.727(12)°,V=1.0553(13)nm~3,D_c=1.543g·cm~(-3),Z=2,R=0.0443,wR=0.0831。Ⅱ属正交晶系,Pbcn空间群,晶胞参数a=1.0153(3)nm,b=1.7543(5)nm,c=1.6860(5)nm,V=3.0031(15)nm~3,D_c=1.394g·cm~(-3),Z=4,R=0.0519,wR=0.1035。Ⅲ属单斜晶系,P2_1/c空间群,晶胞参数a=1.0280(5)nm,b=1.2113(5)nm,c=1.9192(7)nm,β=93.560(7)°,V=2.1366(16)nm~3,D_c=1.712g·cm~(-3),Z=4。Ⅳ属单斜晶系,Cc空间群,晶胞参数a=1.5875(7)nm,b=1.0359(5)nm,C=2.1919(9)nm,β=101.266(8)°,V=3.535(3)nm~3,Dc=1.443g·cm~(-3),Z=4。Ⅰ和Ⅱ为两核铁簇,其簇骨架Fe_2PCl和Fe_2P_2呈蝶状。Ⅲ和Ⅳ     

肽核酸骨架分子键联卟啉的合成及结构表征

以5,10,15-三苯基-20-(4-羧基苯基)卟啉和5,10,15-三苯基-20-(4-羟基苯基)卟啉为原料, 分别与N-(Boc-氨乙基)甘氨酸乙酯(3)及其衍生物4作用, 得到了两种肽核酸骨架分子键联卟啉化合物6和8. 中间体和目标化合物均由紫外-可见光谱、红外光谱、核磁共振光谱、质谱及元素分析所确证. 目标化合物的荧光光谱测试结果表明, 肽核酸单元分子的链接对卟啉分子的荧光波长和强度影响不大.     

脉冲激光引信用PFM和PWM式LD驱动电路的研究

 在激光引信的通讯系统中，针对引信用脉冲式半导体激光器驱动电路的脉冲宽度、频率、功率可调的需要，根据LD驱动电路的工作原理，建立了LD驱动电路的一般模型。然后用电子多频振荡器提供驱动信号，用双MOS驱动器来驱动半导体激光器，通过大量的实验、仿真、分析、比较，设计出了方便可调的大功率LD的驱动电路，该电路的脉冲频率和脉冲宽度可方便调整。并且该驱动电路的频率调节范围大（10Hz~20kHz）；脉冲宽度可以从几ns到几百ns进行调节，大大提高了激光引信通讯系统的性能与可靠性。     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

Hierarchical and probabilistic quantum state sharing via a non-maximally entangled stateHierarchical and probabilistic quantum state sharing via a non-maximally entangled stateHierarchical and probabilistic quantum state sharing via a non-maximally entangled state

A scheme that probabilistically realizes hierarchical quantum state sharing of an arbitrary unknown qubit state with a four-qubit non-maximally entangled 丨X） state is presented in this paper. In the scheme, the sender Alice distributes a quantum secret with a Bell-state measurement and publishes her measurement outcomes via a classical channel to three agents who are divided into two grades. One agent is in the upper grade, while the other two agents are in the lower grade. Then by introducing an ancillary qubit, the agent of the upper grade only needs the assistance of any one of the other two agents for probabilistically obtaining the secret, while an agent of the lower grade needs the help of both the other two agents by using a controlled-NOT operation and a proper positive operator-valued measurement instead of the usual projective measurement. In other words, the agents of two different grades have different authorities to reconstruct Alice＇s secret in a probabilistic manner. The scheme can also be modified to implement the threshold-controlled teleportation.     

黑米花色苷酰化修饰红外光谱分析

黑米花色苷易受外部环境影响发生降解致使局部分子结构破坏而使营养价值和保健功能有所下降。利用有机酸提供酰基对黑米花色苷进行修饰来提高花色苷结构的稳定性。利用红外光谱分析经咖啡酸酰化修饰黑米花色苷的结构变化。结果表明：黑米花色苷酰化修饰前后于官能团区3 650~3 200和1 680~1 620 cm-1处均有吸收峰，且其于指纹区1 282.68和1 277.51 cm-1处出现酚羟基吸收峰，于1 056.07和1 054.03 cm-1处出现醇羟基吸收峰，719.90和719.71 cm-1处出现苯环上C-H面外弯曲振动吸收峰。由此可见，黑米花色苷酰化修饰后主要结构框架仍为花色苷的芳环结构。此外，黑米花色苷酰化修饰前后于1 900~1 650 cm-1间1 714.28和1 728.13 cm-1处均出现共轭羰基的特征吸收峰，对应于可直接连接在苯环上的α-羰基结构，由此说明黑米花色苷结构中存在着酰基基团。黑米花色苷经酰化修饰后红外图谱于1 517.20 cm-1处出现新吸收峰，其正好处于1 800~900 cm-1双键(不含氢)伸缩振动区，指纹区876.65 cm-1处亦出现了苯环上的C-H面外弯曲振动吸收峰。与之相呼应在经二阶导数处理后红外光谱图中在2 500～2 000 cm-1间出现了新的波动，此波段为累积双键伸缩振动区，而官能团区3 650~3 200 cm-1间3 370.20 cm-1处的吸收峰正好处于多分子缔合区。由此可见，在咖啡酸作为酰基供体，酰化修饰黑米花色苷时由于分子间的重新缔合于结构中引入了新的酰基基团而呈现出一种双酰化的空间结构。黑米花色苷酰化结构中有机酸与糖链相连，将有机酸置于2-苯基苯并吡喃骨架的表面，这种堆积作用模式可以较好地抵抗水的亲核攻击和其他降解反应进而提高黑米花色苷结构的稳定性。