限制加性许瓦兹预条件的变形及其在二维三温能量方程中的应用

给出标准限制加性许瓦兹预条件的变形,并应用当前流行的Newton-Krylov-Schwarz方法,结合该预条件子,求解由二维三温能量方程离散得到的非线性代数方程组,减少收敛所需要的迭代次数和所需的CPU时间.数值实验表明,该方法比标准限制加性许瓦兹预条件方法收敛所需要的迭代次数和CPU时间要少.     

Minimax principle on energy dissipation of incompressible shear flow

The energy dissipation rate is an important concept in the theory of turbulence. Doering-Constantin＇s variational principle characterizes the upper bounds （maxi- mum） of the time-averaged rate of viscous energy dissipation. In the present study, an optimization theoretical point of view was adopted to recast Doering-Constantin＇s formu- lation into a minimax principle for the energy dissipation of an incompressible shear flow. Then, the Kakutani minimax theorem in the game theory is applied to obtain a set of conditions, under which the maximization and the minimization in the minimax principle are commutative. The results explain the spectral constraint of Doering-Constantin, and confirm the equivalence between Doering-Constantin＇s variational principle and Howard- Busse＇s statistical turbulence theory.     

Multi-scale analysis of subgrid stress and energy dissipation in turbulent channel flow

In present study, the subgrid scale （SGS） stress and dissipation for multiscale formulation of large eddy simulation are analyzed using the data of turbulent channel flow at Ret = 180 obtained by direct numerical simulation. It is found that the small scale SGS stress is much smaller than the large scale SGS stress for all the stress components. The dominant contributor to large scale SGS stress is the cross stress between small scale and subgrid scale motions, while the cross stress between large scale and subgrid scale motions make major contributions to small scale SGS stress. The energy transfer from resolved large scales to subgrid scales is mainly caused by SGS Reynolds stress, while that between resolved small scales and subgrid scales are mainly due to the cross stress. The multiscale formulation of SGS models are evaluated a priori, and it is found that the small- small model is superior to other variants in terms of SGS dissipation.     

Statistics and Correlation Properties of Diamagnetic High Rydberg Hydrogen Atom

The spectra of Rydberg hydrogen atom in magnetic fields have been calculated using linear variational method with B-splines basis functions [Acta Phys. Sin. 55 （2006） 3380]. Based on these calculations we have done some statistics analysis about the high Rydberg energy levels. The nearest-neighbor energy spacing distribution and the 3-statistics have been shown about diamagnetic Rydberg hydrogen atom with the magnetic field being 0.6 T and 6 T. The phenomena of multiply crossing, multiply anti-crossing, and the mixed of crossing and anti-crossing of energy levels have appeared in this paper. For both cases, in range of lower energy, the energy 1evel statistics properties close to Poisson distribution. With the increasing of the energy, the energy level statistics properties are away to Poisson distribution and tend to Wigner distribution step by step.     

Radiation energy flux of Dirac field of static spherically symmetric black holes

By the statistical entropy of the Dirac field of the static spherically symmetric black hole, the result is obtained that the radiation energy flux of the black hole is proportional to the quartic of the temperature of its event horizon. That is, the thermal radiation of the black hole always satisfies the generalised Stenfan--Boltzmann law. The derived generalised Stenfan--Boltzmann coefficient is no longer a constant. When the cut-off distance and the thin film thickness are both fixed, it is a proportional coefficient related to the space--time metric near the event horizon and the average radial effusion velocity of the radiation particles from the thin film. Finally, the radiation energy fluxes and the radiation powers of the Schwarzschild black hole and the Reissner--Nordstrõm black hole are derived, separately.     

基于箭形累积损伤的裂纹尖端力学:奇异性分级和多尺度分段

在适度的空间和时间尺度组合下,裂纹既可在几个月中蠕变几个纳米,也能在几秒钟内扩展10km.虽然裂纹的尖端没有实际的质量,但是它能通过激活周围的物质而处于高能量状态.依赖于材料的损伤方向,激活质量的减少和增加可发生在尺度转变之前或之后.每个尺度区的分段阈值被假定为与裂纹尖端速度的平方a~2和激活质量密度M的乘积有关:W=M_(↓↑)a_(↑↓)~2和D=M~(↓↑)a_(↑↓)~2.W和D分别被称为直接吸收和自耗散能量密度.正如下标/上标符号所示,激活的质量密度M_(↓↑)和M~(↓↑)与裂纹尖端速度a变化趋势相反,既可增加也可减少.a~2和M的互补效应隐含着常用于宇宙物理学建模的膨胀和/或收缩的物理过程.在用于尺度敏感的裂纹尖端的行为时,激活的质量密度有相同的解释.分段时的多尺度可以由…皮观、纳观、微观和宏观…组成.因此,形象地说,材料损伤过程可以通过裂纹扩展过程中非均匀的总体和局部能量的传递来模拟.疲劳裂纹扩展引起的材料损伤被用来阐释由大到小和由慢到快的尺度/时间序,热力学中的冷→热和有序→无序转换.这一过程正巧与宇宙演化的箭形方向相反,宇宙演化遵循小→大和快→慢,而热力学相反,遵循热→冷和无序→有序.为了表示由损伤萌生所造成的类裂缝型缺陷的不均匀性,提出了一个被称为裂纹尖端力学(crack tip mechanics,CTM)的新模式.涉及的范围是模拟原子列之间的界面裂纹或连续体中分叉的切口.假如需要的话,尺寸和时间的范围可以复盖从皮观到宏观甚至更大.虽然采用疲劳裂纹来说明CTM的基本原理,在宇宙物理学背景中与直接吸收和自耗散相关的膨胀和收缩的情况可以描述裂纹周围激活质量的行为,它们可看为能量的汇或源.奇异性被用来捕获能量的源或汇的特性,物理上,两者作为界面的一部分,从数学上看则是不连续的线的一部分.能量从一种形式变为另一种形式取决于能量吸收或耗散的箭形损伤时间,这之中牵涉到尺度分段和奇异性强度的联合应用.材料组分随时间的劣化是根据指定的设计寿命导出的,从而使材料的响应与加载率的时间历史匹配.2024-T3铝板的皮观/纳观/微观/宏观开裂模型用来说明什么地方可以增加结构的寿命部分.皮观/纳观/微观/宏观/结构系统的性能随时间劣化可以用9个尺度转变物理参数来描述:纳观/微观区有3个(μ_(na/mi)~*,σ_(na/mi)~*,d_(na/mi)~*),微观/宏观区有3个(μ_(mi/ma)~*,σ_(mi/ma)~*,d_(mi/ma)~*),皮观/纳观区有3个(μ_(pi/na)~*,σ_(pi/na)~*,d_(pi/na)~*).下标pi,na,mi,ma和struc分别表示皮观、纳观、微观、宏观和结构.只要知道两个相连的尺度敏感参数,在较低尺度的时间相关的局部物理参数就完成了分析连续体的形式论,虽然它们并不需要用实验来知道.更具体地说,根据皮观→纳观→微观→宏观分别有1.25/1.00/0.75/0.50的λ奇异性强度,皮观裂纹、纳观裂纹、微观裂纹和宏观裂纹的转变特征是从时间箭形的指定的寿命预期来确定的.附加的0.25强度的奇异性可用于结构元件.回想起来,λ=0.5相应于断裂力学中的应力分量与r~(0.5)成反比,r是与宏观裂纹尖端的距离.微观裂纹、纳观裂纹和皮观裂纹分别赋予r~(-0.75),r~(-1.0),r~(-1.25)的奇异性.箭形时间(以年为单位)取决于问题的定义.设备的关键部件可用1.5~±/2.5~±/3.5~±/5.5~±寿命分布和总寿命为13~±年(a)的皮观/纳观/微观/宏观尺度来设计运行.上标±表示多于或少于实际运行的时间.累进损伤被假定为发生在皮观→纳观→微观→宏观方向.同样的方案用于20年总寿命的2024-T3铝板的疲劳损伤,按照1.5~±/2.5~±/3.5~±/5.5~±/7.0~±的方式将它的寿命分布在皮观、纳观、微观、宏观和结构的尺度上,这样的指定只是满足在每个尺度范围内损伤内部材料结构所用的能量匹配,因此可以强制执行在总寿命的跨度内精确的时间相关的材料性能劣化过程.     

动静组合加载下花岗岩的力学性能

在霍普金森试验系统上进行了花岗岩动静组合加载试验,获得了花岗岩在动静组合加载下的力学性能.试验结果表明:当动载不变,改变静栽大小,在弹性范围内,花岗岩强度随着静载增大而增大;当静载超过弹性极限时,花岗岩强度迅速降低;在其破坏过程中对冲击能量的吸收随静载增大而减小;变形模量呈现明显的两段特征.当静载不变,改变动载大小,花岗岩的强度随动载增大而增大;变形模量先随动载增大而增大,而后又突然变小,并不出现两段特征;在其破坏过程中对冲击能量的吸收随动载应变率的增大而逐渐增大.所得结果为岩爆、深部破岩等研究提供实验依据.     

泡沫铝夹芯双方管结构准静态轴压性能的实验研究

对几种泡沫铝夹芯方管结构的准静态轴压性能进行了实验研究。结果表明,较空管及泡沫铝夹芯单管结构,泡沫铝夹芯双管结构的承载能力及能量吸收效率明显得到增强。双管夹芯结构中外管撕裂模式的结构行程利用率和能量吸收效率高于相应的外管周期折叠模式。而泡沫铝四角填充方式提高了双管夹芯结构相同变形模式下的能量吸收效率和结构变形的稳定性。同时研究了内管管壁及材料强度对泡沫铝夹芯双管结构的影响。随着内管壁厚增大,双管夹芯结构的能量吸收效率提高,而内管材料强度影响不明显。     

湍流能量耗散率标度律实验研究

应用粒子图像测速(PIV)系统对平板湍流边界层内流向和法向的瞬时速度进行了测量。湍流的能量耗散率由轴对称假设得到,同时在研究湍流动能耗散率标度律的过程中采用传统的统计学方法。实验结果显示,对于不同尺度上和不同法向位置湍流耗散率标度律来说,湍流耗散主要发生在小尺度上,也就是说湍动能耗散率标度律在小尺度上具有普适性。另外,根据层次结构理论假设,通过PIV实验数据对最高激发态的标度指数进行了研究,结果发现,最高激发态存在绝对标度指数,并且绝对标度律是由信号中最强耗散涨落的局部结构产生的。     

走滑式断层地震的折迭突变模型

利用过势函数微分形式的途径,计入远场外力功的影响,对走滑式断层地震机制进行分析．研究表明:突变理论中折迭突变模型展示的性状,与走滑式断层地震的主要特征之间一一对应．折迭突变可对包括震前、震后围岩-断层系统稳定性描述在内的断层失稳起、终点位置、断层失稳错距等作出描述．给出3种性状可相互印证的断层失稳围岩弹性能释放量图解．走滑式断层地震强度与围岩压力及围岩断层的刚度比等有关,围岩压力大、刚度比小、主切应力轴与发震断层面夹角大,则地震强度大．