IMPORTANCE MEASURE OF CORRELATED VARIABLES IN POLYNOMIAL OUTPUT

为了解决一般工程问题中输出量为多项式情况下相关正态输入变量的贡献识别问题，以二次不含交叉项的多项输出量为例，利用多维相关正态分布及其条件分布的性质，解析地推导了相关正态输入变量对输出量总方差的独立贡献及相关贡献，采用算例验证了所推导的解析表达式的正确性．文中所推导的相关正态变量独立贡献和相关贡献的表达式可直接用于输出量为二次不含交叉项多项式或一次多项式情况下的输入变量贡献的识别，并且为其他新的算法提供了对照解，另外此方法亦可以推广至含交叉项的高阶多项式，解决更为复杂输出量情况下输入量的贡献识别问题．     

Review of chip-scale atomic clocks based on coherent population trapping

Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.     

超导Josephson隧道结性能和超导量子比特电路的设计方案

超导Josephson隧道结是实现超导量子比特的基本元件。利用悬空掩膜和电子束斜蒸发相结合的工艺方法制备Al/Al2O3/Al超导Josephson隧道结,并且系统研究了底电极、上电极薄膜的厚度及氧化参数等工艺条件与隧道结超导电流密度Jc和面积归一化电阻Rc的关系。设计测量了三种方案的超导量子比特电路,通过对参数和结构的优化测出了较理想的量子比特(qubit)信号。     

Laser output of radial-slab solid-state laser

In this letter, numerical simulation and experimental study of a radial-slab solid-state laser are presented. The laser includes four crossing-slabs pumped by four Xe flashlamps. The numerical simulation of coherent intensity in the near field and the far field indicates that the laser with the structure can improve the quality of output beam compared with incoherent beam combination. The radial-slab solid-state laser is fabricated, and initial experiments are carried out at a pulse repetition of 1 Hz. Nine beams in the near field and one combined beam in the far field are obtained in our initial experiment. The experimental results are consistent with the numerical analysis in the coherent condition. The results show that coherent beam combination is obtained by this laser.     

基采用时频区域检测的雷达信号盲分选算法

为了解决欠定条件下密集雷达信号分选问题,提高雷达信号盲分选算法精度,提出了一种采用时频区域检测的雷达信号盲分选算法,首先利用短时傅立叶变换将混合信号映射至时频平面进行处理,然后通过聚类算法估计出混合矩阵,从而反解出源信号矩阵,进而估计出每一雷达源信号,能够在信号的时频平面投影相交且欠定的条件下,实现信号分选功能.仿真实验结果表明:提出的算法相比于传统的类MUSIC算法及其衍生的相关改进算法具有更高的分选精度和算法收敛性,且估计得到的源信号时域波形更优,体现了其有效性和优越性.     

Effect of Time Delay on Binary Signal Detection via a Bistable System

The effect of time delay on binary signal detection via a bistable system in the presence of white or colored Gaussian noise is investigated. By defining the bit error rate based on the solution of the approximated Fokker- Planck equation, the detector performance is investigated theoretically and is verified by Monte Carlo simulation. It is shown that, when the system parameter or noise intensity is optimally chosen, the increasing time delay generally improves the system performance. It is also shown that it is more difficult to accurately predict the system performance with a larger time delay and correlation time. This may inspire more thorough investigations in cooperative effects of a nonlinear system and time delay on signal processing.     

探究具有专业特色的计算方法实验教学

《计算方法》的实验教学是这门课程的重要组成部分,在我校,《计算方法》作为一门选修课,实验教学就显得更为重要.本文着重讨论了如何结合学校的特色专业,利用MATLAB进行计算方法的实验教学,增加课程应用性的同时,也为学生专业课的学习打下基础.     

基于小波Fisz变换的X射线脉冲星信号降噪研究

针对X射线脉冲星信号信噪比低,难以获取精确脉冲星信号相位的问题,提出了基于WaveletFisz变换的X射线脉冲星信号的估计方法.根据X射线脉冲星信号特性建立了信号模型,推导了Wavelet-Fisz变换理论,利用该变换将X射线脉冲星信号逼近于高斯分布,对变换后的信号数据进行估计.对大量RXTE的实测数据进行分析,结果表明在Wavelet-Fisz变换下能获得较好的估计性能,且耗时小,有利于X射线脉冲星导航的工程应用.     

基于虚拟中心电流法的 HL-2M快控电源数学模型

针对中国环流器2号M(HL-2M)装置中用于核聚变物理实验等离子体的垂直不稳定性控制的快控电源拓扑结构，充分考虑线圈的自感与互感对输出的影响，构建出数学模型，首次提出并运用虚拟中心电流法，使得控制算法更加简单，采用多输入多输出的控制方法，利用2个参量控制3个变量。本文基于基本供电方案得到多线圈耦合电压，基于快控电源拓扑推导出快控电源电路方程，再将其合并得到最终的线圈电压数学模型，最后进行仿真验证。结果表明数学模型搭建正确，为今后进行进一步计算提供了坚实的基础。