高分子微泡的研究——Ⅰ.二烯丙基二(十二烷基)季铵盐的合成与聚合

本文合成了二烯丙基二(十二烷基)溴化铵(DADD),用超声波分散其水溶液而形成微泡。用γ射线、偶氮二异丁睛(AIBN)、过硫酸铵(APS)引发使微泡发生聚合,井对所得的微泡进行表征。实验结果证明:用γ射线引发能使微泡双分子膜发生全部聚合、而用AIBN,APS引发则只能发生部分聚合,聚合后,微泡的形状(态),渗透性行为、相转变温度等都未发生变化,但其稳定性却提高了,用断裂电镜证实了本文所合成的微泡是单室的双分子膜微泡。     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

超声波作用下羰基化合物的还原偶联反应

超声波在一些有机反应中有明显的促进作用「“，Luche等认为超声波的作用有两种主要类型［’j．一类是涉及电子转移的自由基或离子一自由基型反应，由于超声波的空化作用所产生的局部高温高压可以促进电子转移，从而明显地加快反应速度；对大多数离子型反应，超声波只能起到机械的物理作用．我们曾报道偕二卤化合物在Li、Na、Mg等金属作用下产生卡宾的反应是单电子转移过程，该反应可由于超声辐射而大大加速［‘］；而在芳基叔脚的断裂反应中，超声波可以促进三苯基俄与金属馊反应生成二苯基脚负离子，但对它进一步的亲核取代反应却没有明…     

超声波对亲核加成反应的影响：氰乙基醚香料的合成

超声波在实践中已被多方面采用,近年在化学领域中用于有机合成,已成为热门课题。由于在超声波作用下,体系中产生空穴作用,局部产生高温高压,所释放出的能量,足以使有机分子发生反应,从而促进了反应进行。如用于取     

高活性钛镀铂电极

在电沉积过程中采用超声波振荡技术，选择最佳条件可制备牢固高活性然镀铂电极，超声波振荡技术改善他镀层与基底的粘结力。电极活性与双层电容有关，并旭因于表面粗糙度。     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

超声波作用下的糖精相转移催化N—苄基化反应的研究

超声波作用下的糖精相转移催化Ｎ－苄基化反应的研究嵇学林刘华黄昆（江苏镇江医学院有机化学教研室镇江２１２００１）关键词超声波相转换催化糖精苄基化有机声化学近年来，由于超声波（Ｕｌｔｒａｓｏｕｎ，缩写Ｕ．Ｓ）在有机合成中应用的不断发展，逐渐形成了一门新兴...     

2-取代亚肼基-1,3-二硫杂环戊烷类化合物的合成及其生物活性研究

以取代苯甲醛、取代吡啶和取代苯甲酸酯等为原料合成了 10种含硫杂环化合物 (其中 2a～ 2g化合物为国内外未见报道 ) .在合成过程中采用了超声波技术 ,极大地缩短了反应时间 ,提高了收率 .所得化合物的结构经IR ,1 HNMR ,MS和元素分析证实 .对其生物活性进行了初步测试 ,结果证明一些化合物具有良好的抑菌或杀菌作用 ,其中 2b ,2c ,2e ,2h ,2i和2j对大肠杆菌 ( 10 40 7号 )的抗菌效果与CET和SMZ相当 ;2b ,2c ,2f对草绿色链球菌 ( 112 3号 )的抗菌效果与CET和SMZ相当 .