激光诱导三维网状石墨烯的一步法制备及应用

三维多孔石墨烯作为一种优异的石墨烯碳材料, 其独特的多孔结构使得材料在具有较大比表面积的同时还保持着足够高的电子迁移率和机械稳定性, 在电子器件中得到了广泛的应用. 本文介绍的激光诱导石墨烯是一种以一步法直接制备得到的三维网状石墨烯材料, 该技术将三维石墨烯的制备和图案化相结合, 无需进行湿化学反应处理, 制作方法更简便, 材料性能更优异. 目前研究主要集中在通过掺杂提高性能和利用转移法实现不同基底器件的制备. 激光诱导石墨烯自身特有的属性如多孔微纳米结构和大的比表面积等使其在超级电容器和传感器等领域拥有较高的应用价值.     

中温冷水机组诱导系统分析

中温冷水机组诱导系统由三部分组成:中温冷水机组、集约型空气处理机组、末端诱导室。集约型空气处理机组采用椭圆管换热技术实现13℃低温送风的同时,将供回水温度提高至10/20℃。对该系统及一次回风系统进行分析,对比结果发现,处理相同房间空气时,中温冷水机组诱导系统的输入比一次回风系统输入少178.28k W,可节能42.29%;中温冷水机组诱导系统的损失比一次回风系统的损失低,两系统对应效率分别为9.49%和5.58%。     

石墨烯条带的电子结构与性质:电场及长度效应

在密度泛函理论(DFT)和含时密度泛函理论(TDDFT)的基础上对宽度上含有8个zigzag链的石墨烯条带(8-ZGNR)的基态和激发态的性质进行了理论研究,着重考察了条带长度及电场的影响.B3LYP杂化泛函的计算结果显示:在基态上,8-ZGNR的最低能量态并不具有磁性,随着长度的增加,才会显示出反铁磁的性质.静电场的加入使8-ZGNR显示出反铁磁性和半金属性.在激发态上,诱导电子会随着外激光脉冲的变化而发生移动和变化,但是相比而言,α自旋电子更容易被激发而产生较明显的诱导电子密度,而β自旋电子则更容易脱离外激光场的控制而产生非绝热现象.     

The promoting role of minor amount of water in solvent-free hydrogenation of halogenated nitrobenzenes

This study shows that minor amount of water plays a very important role in solvent-free hydrogenation of halogenated nitrobenzenes. For dried sponge Pd, the reaction cannot occur in the absence of water. For Pd/C catalyst, minor amount of water reduces the induction time, increases the reaction rate and reaction TOFs. Water might enhance the diffusion, adsorption and dissociation of H2 on Pd catalysts.     

Capillary electrophoresis with laser-induced fluorescence detection of main polyamines and precursor amino acids in saliva

A hollow-fiber liquid-phase microextraction （HF-LPME） method has been developed for the purification and preconcentration of biogenic polyamines and their precursor amino acids in human saliva. Putrescine （Put）, cadaverine （Cad）, spermidine （Spe）, ornithine （Orn）, lysine （Lys）, and arginine （Arg） were determined by the CE-LIF detection after microextraction. Several factors that affect extraction efficiency, separation, and detection were investigated. Under the optimum conditions, six analytes could achieve baseline separation within 30 min, exhibiting a linear calibration at three orders of magnitude （r2 〉 0.998）; the obtained enrichment factors of HF-LPME were between 19 （for Orn） and 2] 8 （for Cad）, and the LODs were in the range of 0.0072-0.26 nmol/L. The proposed HF-LPME/CE-LIF method has been successfully applied for the sensitive analyses of the real-world saliva samples collected from healthy volunteers and different patients with oral diseases, providing a potential method for primary non-invasive diagnosis of some oral diseases.     

氧化石墨烯可调节多巴胺神经元分化

<正>中科院上海生命科学研究院健康科学研究所乐卫东小组发现,纳米材料氧化石墨烯在胚胎干细胞向多巴胺神经元分化过程中可发挥重要作用。相关研究日前发表于《纳米医学》。中脑多巴胺能神经元的退行性死亡是帕金森氏症的最显著特征,通过干细胞诱导多巴胺神经元分化并进行细胞移植治疗已经成为潜在的帕金森氏症治疗方法。然而,学界对于胚胎干细胞向多巴胺神     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

How polydispersity of network polymers influences strain-induced crystal nucleation in a rubber

Network polymers in a rubber or a gel often contain non-uniform chain lengths. By means of dynamic Monte Carlo simulations of polymer mixtures with various compositions of two chain lengths, we investigated how the factor of polydispersity influences their strain-induced crystal nucleation. Under a high temperature and a high strain rate, the stretching of both polymers revealed that crystal nucleation is mainly accelerated by the presence of short-chain polymers; nevertheless, both polymers join together in the nucleation process. Further analysis proved that crystal nucleation is initiated from those highly stretched short segments, which are rich on the short-chain polymers.