电感耦合等离子体质谱法测定纺织品中可萃取砷

采用电感耦合等离子体质谱法测定了纺织品中的可萃取As。采用反应模式以去除40Ar35Cl+离子对测定75As+的干扰,标准工作曲线采用基体匹配的方法减少基体效应的影响。样品采用模拟酸性汗液进行萃取,将萃取液稀释5倍后进行测定,以降低盐分对仪器的影响。方法检出限为6μg/kg,测定低限2μg/kg,在样品中添加0.02~0.2 mg/kg的砷时,回收率97.8%~98.6%,相对标准偏差小于5%。方法满足了检测生态纺织品(婴幼儿产品)的限量要求。     

基体分离-高分辨电感耦合等离子体质谱法测定硫化物矿石中的稀土元素和钇

采用Na2O2碱熔,经阳离子交换树脂分离富集,分离掉大量熔剂和基体,HR-ICP-MS上测定铅锌矿中的稀土元素。采用内标法消除基体影响,轻稀土元素采用低分辨率模式测定,重稀土元素采用高分辨率模式测定,有效地消除了测定过程中的基体干扰和轻稀土对重稀土的干扰。方法检出限为0.5~12.1ng/g,RSD在1.0%~4.6%之间。     

盐析剂——氯化钠存在下稀土含量的准确测定

分光光度法(Spectrophotometry)和电感耦合等离子体发射光谱法(ICP-AES)是常用的测定单一稀土含量的方法。但是萃取稀土过程中通常会加入盐析剂NaCl,萃余水相中大量钠离子所产生的光谱背景严重干扰了稀土含量的测定。考察了NaCl对稀土含量测定的影响,实验结果表明:在基体不匹配的情况下,只有当钠盐浓度低于0.08 mol·L-1时,分光光度法可以准确测定萃余液中单一轻稀土(La,Ce,Pr,Nd)及中稀土(Sm,Eu,Gd)的含量,但不能准确测定重稀土的含量;而使用ICP-AES法,在NaCl浓度为0.001~1.0 mol·L-1条件下无法准确测定稀土含量。因此,实验室宜采用分光光度法在基体不匹配的条件下测定轻、中稀土含量,重稀土在基体匹配的条件下用电感耦合等离子体发射光谱法测定。     

微波消解-电感耦合等离子体质谱法测定高纯五氧化二钒中15种杂质元素

高纯五氧化二钒样品在硝酸-氢氟酸(4+1)混合液中经微波消解处理,采用电感耦合等离子体质谱法测定样品溶液中15种杂质元素(钛、硅、铝、铬、镍、铜、铅、砷、磷、铁、锰、钙、镁、钾、钠)的含量。采用内标法消除基体的影响。方法的检出限(3s/k)在0.03~0.89μg·L-1之间。方法的加标回收率在90.0%~113%之间,相对标准偏差(n=8)小于5.0%。五氧化二钒5号样品中8种杂质元素的测定值与石墨炉原子吸收光谱法进行核对,测得结果互相符合。     

微波消解-电感耦合等离子体质谱法测定粮食中12种重金属元素

粮食样品用硝酸-过氧化氢微波消解处理,采用电感耦合等离子体质谱法测定样品溶液中12种重金属元素(砷、铅、镉、硒、铬、铊、锰、镍、铜、铀、钴、钒)的含量。采用内标法消除基体的影响。方法的检出限(3S/N)在0.092~17.5pg·g-1之间。方法的加标回收率在88.1%~118%之间,相对标准偏差(n=5)小于6.0%。方法用于鸡肉标准物质(GBW 10018)中重金属含量的测定,测定值与认定值相符。     

纳米银的单颗粒-电感耦合等离子质谱法表征及其测定

建立单颗粒-电感耦合等离子体质谱法( SP-ICP-MS)测定稀溶液中纳米银颗粒粒度分布及纳米银颗粒数量浓度的方法。当停留时间为3 ms时,两个或多个纳米银颗粒同时进入检测器的可能性降至最低。采用5倍标准偏差迭代算法(5σ)区分纳米银颗粒信号和背景信号。采用SP-ICP-MS法测定3种商品级纳米银颗粒(30,50和100 nm)粒度分布和纳米颗粒浓度。结果表明：SP-ICP-MS法测定纳米银颗粒结果与纳米银的TEM值相近,可采用SP-ICP-MS法表征纳米银颗粒。本方法测定稀溶液中纳米银颗粒粒度检出限为25 nm,纳米银颗粒浓度检出限约为8×104个/L。将纳米银颗粒加入到自来水样品中并进行测定,获得相近的纳米银粒度分布及纳米颗粒浓度。本方法简单、快捷、灵敏度高,可为研究水环境中纳米银的风险评估提供可靠分析方法,并为饮用水中纳米银的监测提供分析技术。     

铋锑试金测定硫化铜镍矿中钌铑钯铱铂

建立了用于预富集硫化铜镍矿中钌铑钯铱铂5种铂族元素的铋锑试金方法。40.0 g氧化铋、25.0 g硼酸、10.0 g碳酸钠、1.00 g淀粉与10.0 g待测样品于120 mL瓷皿中,充分混匀,850℃入炉,20 min后升至1000℃,保留40 min,出炉后趁热倾倒熔渣,使铋试金于空气中自然冷却。设计两段灰吹流程,铋试金先在镁砂灰皿内灰吹,直至剩余直径约5 mm,而后直接转入盛有20 g熔融锑粉的坩埚盖中继续灰吹,获得直径约1 mm的试金合粒。所得合粒经微波消解,冷却后定容至10 mL。铂钯用ICP-OES分析;钌铑铱质量数选择99Ru,103Rh和191Ir,以115In和185Re为内标,应用ICP-MS分析。对标准物质GBW07196平行测定12次,铂族元素相对标准偏差为7.0%~9.5%。在10 g取样量条件下,方法对Ru,Rh,Pd,Ir和Pt的检出限分别为0.027,0.016,0.11,0.10和0.11 ng/g。应用本方法处理标准物质GBW07194,GBW07195和GBW07196均获得了满意的结果。     

氢化物发生与扇形磁场电感耦合等离子体质谱联用测定天然水中无机硒的价态

通过对仪器参数、质谱干扰、Se同位素选择、NaBH4浓度、样品酸度、Se?还原条件及氢化反应干扰的评估和优化,建立了自制连续流动氢化物发生装置与扇形磁场电感耦合等离子体质谱联用测定天然水中无机硒价态的分析方法,克服了天然水中多种元素对氢化反应的干扰,解决了不同介质样品中Se?还原率保持95%以上时间短的问题。方法检出限为0.002μg/L,灵敏度为215378 cps/(μg/L),优于同类方法,测定河水和海水中Se?和Se?精密度小于4%,加标回收率在97%~103%之间,可应用于准确测定海水、河口区半咸水、河水等天然水中Se?和Se?浓度。     

Synthesis,Structure and Magnetic Property of One Ni~Ⅱ Based Coordination Polymer

One new coordination polymer, [Ni(m-bix)(m-BDC)](1, m-bix = 1,3-bis(imidazol-1-ylmethyl)benzene, m-BDC = 1,3-benzenedicarboxylic acids), has been hydrothermally synthesized and structurally characterized by elemental analysis, IR, TGA and X-ray single-crystal diffraction. The green block crystal of complex 1(C22H18N4Ni O4) belongs to monoclinic system, space group P21/c with a = 10.0418(3), b = 23.8651(6), c = 8.7872(2) A, β = 112.333(3)o, V = 1947.88(9)A3, Z = 4, Dc = 1.572 g/cm3, Mr = 461.11, F(000) = 952, R = 0.0335 and w R = 0.0683 for 2827 observed reflections(I 2σ(I)). Complex 1 exhibits a novel 6-connected 3D sxd type topological framework. The magnetic characterization of complex 1 shows antiferromagnetic coupling exchange.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.