PREPARATION AND CATALYTIC ACTIVITY OF BIOACTIVE FIBERS

Two kinds of water-soluble metallophthalocyanines, binuclear cobalt phthalocyanine （Co2Pc2） and binuclear ferric phthalocyanine （Fe2Pc2）, were synthesized through phenylanhydride-urea route and characterized by elemental analysis and FT-IR spectra. Binuclear metallophthalocyanine derivatives （Mt2Pc2） were immobilized on silk fibers and modified viscose fibers to construct bioactive fibers of mimic enzyme. Mt2Pc2 was used as the active center of bioactive fibers, viscose and silk fibers as the microenvironments. The catalytic oxidation ability of bioactive fibers on the malodors of methanthiol and hydrogen sulfide was investigated at room temperature. The experimental results indicated that the catalytic activity of such bioactive fibers was closely correlative to the types ofbioactive fibers and substrates.     

叶丝在增温增湿与滚筒烘丝工序中香味组分变化分析

该文研究了制丝线增温增湿和滚筒烘丝工序加工对叶丝香味组分的影响,采用溶剂超声萃取前处理结合GC-MS法测定叶丝的香味组分,并对SIROX增温增湿工序和滚筒烘丝工序前后叶丝香味组分的相对含量进行了分析,比较了工序前后、工序间香味组分的变化趋势。结果显示:①经SIROX增温增湿工序加工后,乙酸、苯甲醇等18种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等6种组分相对含量增加;②经滚筒烘丝工序加工后,乙酸、麦芽酚等14种组分相对含量减少,糠醇、糠醛等6种组分相对含量增加;③经增温增湿及滚筒烘丝两工序后,乙酸、2,3-丁二醇等23种组分相对含量减少,糠醇、2,4-二羟基-2,5-二甲基-3(2H)-呋喃-3-酮等4种组分相对含量增加;④两工序间的温度、湿度剧烈变化,使叶丝内部组分发生了美拉德反应、降解反应、挥发等,香味组分经两个工序后发生了一系列显著变化。该研究对提升卷烟产品质量、优化工艺参数、开发高质量产品具有重要意义。     

THE PREPARATION AND STUDY ON THE NANO-TiO2/SILK FIBROIN COMPOSITE FILMS BY THE SOL-GEL METHOD

Based on the sol-gel technique using butyl titanate as oxide precursor, the regenerated SF (silk fibroin)/nano-TiO2 composite films were synthesized. Different amounts of butyl titanate to SF were used to verify this effect on the characteristics of the formed materials. Samples were characterized by thermogravimetric analysis, X-ray diffractometry, UV, AFM and FT-IR spectroscopy.The experimental results reveal that, compared to the pure silk fibroin films, the mechanical strength of these regenerated SF/nano-TiO2 composite films were increased and the dissolubility in water of SF/nano-TiO2 composite films in aqueous solution were decreased. The diameter of nano-TiO2 particle films was about 80nm through UV and AFM. The nano-TiO2 particles were well dispersed in the regenerated silk fibroin. It was found that the crystal structures of the composite films were transited from typical Silk Ⅰ to typical Silk Ⅱ by the XRD and FTIR. Furthermore, the crystallinity of the composite films was obviously improved. Through the TGA, it was demonstrated that the heat transition temperature of composite films was also enhanced.     

丝胶基半互穿温敏凝胶的合成及其溶胀行为的研究

采用半互穿网络技术, 将具有生物相容性的丝胶蛋白(silk sericin)作为第二网络进入聚(N-异丙基丙烯酰胺)(PNIPAM)水凝胶网络中, 在水溶液中制备得到具有半互穿网络结构的丝胶基温敏水凝胶(SS/PNIPAM semi-IPNs). 采用称重法研究了产物的(消)溶胀、温度敏感性、最大溶胀度及脉冲响应行为; 利用扫描电镜(SEM), 差示扫描量热仪(DSC)和动态热机械分析仪(DMA)分别考察了产物的内部形态、热相转变行为和其储能模量随温度的变化. 结果表明: 具有较高亲水性的丝胶蛋白的引入增大了semi-IPNs水凝胶的内部孔径, 导致SS/PNIPAM半互穿水凝胶的溶胀度增加, 并且其储能模量随温度变化更明显. 相比于纯PNIPAM水凝胶, 半互穿水凝胶的消溶胀速率和低临界溶解温度(LCST)变化不大.     

聚丙烯酸甲酯载体对柱状假丝酵母脂肪酶固定化的研究（Ⅰ）

合成了一系列不同结构的聚丙烯酸甲酯，考察了它们的固定化酵母脂肪酶催化酯水解反应的效果，得到了载体孔结构对固定化效果影响的一些规律．研究了最佳吸附条件，比较ｐＨ和离子强度对酵母脂肪酶自由酶和固定化酶催化酯水解反应活力的影响．     

Amperometric Determination of lndole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

Platinum nanowire （PtNW） can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes （CNT） are then dispersed into chitosan （CHIT） solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon （GO） electrode surface, and after evaporation an amperometric sensor for the determination of indole-3-acetic acid （IAA） was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode, in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50 ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.     

用于Z箍缩X辐射谱诊断的柱面凸晶摄谱仪的性能分析

 考虑X光源的空间尺寸和晶体的摇摆曲线,用光线追迹方法计算了诊断丝阵Z箍缩等离子体X辐射谱的柱面凸晶摄谱仪的色散、能谱分辨和空间分辨以及系统参数对它们的影响。结果表明：决定柱面凸晶摄谱仪能谱分辨的主要因素是光源尺寸以及光源-晶体之间距离;增大光源-晶体之间距离能够改善能谱分辨,但导致径向空间分辨能力下降。并依此建立了云母晶体摄谱仪,在“强光一号”装置上对系统进行了测试,获得时间积分铝丝阵负载Z箍缩等离子体X辐射谱。     

铝-钨丝混编阵的Z-箍缩实验研究

利用铝丝和钨丝混合编制的丝阵作为Z箍缩的负载，在俄罗斯Kurchatov研究所的S300强流装置上对其Z箍缩过程进行了实验研究，并与纯铝丝阵和纯钨丝阵的实验结果进行了比较.不同材料组成的丝阵的Z箍缩x射线能谱之间有明显差异，混编丝阵的铝K壳层的x射线辐射强度比纯铝丝阵的弱，在纯钨丝阵Z箍缩中没有发现波长小于1.6nm的线辐射.混编丝阵Z箍缩的x射线发光区域比纯铝丝阵的小，但比纯钨丝阵的大,混编丝阵的x射线产额比纯铝丝阵的大，但比纯钨丝阵的略低.在驱动电流为2.5—2.8MA条件下，Z箍缩的径向收缩比为4—5，x射线辐射脉冲脉宽为25ns左右，峰值为0.3—0.5TW，总能量为10—20kJ.激光探针的阴影像显示了丝阵等离子体形成的细致过程，还表明了等离子体的边界面不够清晰，其不稳定性有明显的发展，内部有丰富的结构. 关键词： Z箍缩 混编丝阵 S300强流装置     

强光一号装置单氘丝中子发射实验研究

 介绍了利用飞行时间技术测量Z箍缩装置单氘丝中子发射。实验发现,Z箍缩中子发射过程中,伴随产生很强的硬X射线,利用铝丝阵产生硬X射线的实验,建立较好的硬X射线屏蔽,大大减弱了它的辐射强度。所采用的双闪烁探测器中子探测系统,进行了3个发次的单氘丝负载实验,确认产生了聚变氘氘中子。4172发次实验测量结果表明,中子产额1.5×10⁹,中子能量为(2.45±0.26) MeV。实验结合分幅照相数据分析认为,峰电流和负载未能很好匹配,等离子体存在不稳定现象。