Measurement and analysis of fission rates in a spherical mockup of uranium and polyethylene

Measurements of the reaction rate distribution were carried out using two kinds of Plate Micro Fission Chamber （PMFC）. The first is a depleted uranium chamber and the second an enriched uranium chamber. The material in the depleted uranium chamber is strictly the same as the material in the uranium assembly. With the equation solution to conduct the isotope contribution correction, the fission rate of 238U and 235U were obtained from the fission rate of depleted uranium and enriched uranium. Then, the fission count of 238U and 235U in an individual uranium shell was obtained. In this work, MCNP5 and continuous energy cross sections ENDF/BV.0 were used for the analysis of fission rate distribution and fission count. The calculated results were compared with the experimental ones. The calculation of fission rate of DU and EU were found to agree with the measured ones within 10% except at the positions in polyethylene region and the two positions near the outer surface. Because the fission chamber was not considered in the calculation of the fission counts of 238U and 235U, the calculated results did not agree well with the experimental ones.     

中国科学院物理研究所2008年度人才招聘启事

在以质子数和中子数为坐标画出的核素图中,分布着100多种元素的几千种同位素．除少量核素是稳定的以外,其他核素大都有可以测量的半衰期,衰变模式为发射α,β粒子或自发裂变．换句话说,这些核素的基态不会自发地发射质子或中子．核素图的边界分别叫质子滴线和中子滴线,滴线以外的核对质子或中子衰变是不稳定的．     

宽脉冲中子注入下中子裂变链统计涨落的数值计算

研究了裂变系统在宽脉冲外中子源注入驱动下裂变链统计涨落问题.提出了概率分布W_n方程的分解-合成数值模拟计算方法,使裂变系统注入中子源数值模拟计算扩展到一般广义条件(具有任意时间分布、注入时间零点t₀概率分布函数P(t₀)和数概率分布S(n)等).同时讨论了应用物理模型的等效条件.将基本前提等效条件从单介质区模型扩展到多介质区模型.为解概率分布W_n方程必备参数提供了计算平均公式.     

核反应过程中温度参量的提取

核反应中,核温度参量与核反应中的轻粒子的能谱、粒子非稳态布居及同位素产额有直接的依赖关系,通过有关物理量的测量可以实现核温度参量的提取. In this paper we present many observables of the nuclear reactions related to the temperature parameter,and several methods which devoted to the establishment of the nuclear temperature therometer.     

重离子裂变反应中的能级密厦参数和裂变几率

本工作从Ｎｉｌｓｓｏｎ单粒子能级入手,计算了形变核１８６Ｏｓ、１８７Ｉｒ、１８９Ｏｓ和１９３Ａｕ作为激发函数的固有能级密度参数ａｉｎｔ和有效能级密度参数（包括核集体运动效应）ａｅｆｆ．由这样能量相关的能级密度参数计算的裂变几率Ｐｆ（Ｕ）与本工作的裂变几率符合很好． Based on the single-particle levels given by Nilsson,the intrinsic and effective(with collective effects)level density parameters as a function of theexcitation energy for the 186Os, 187Ir, 189Os and 193Au deformation nuclei have been calculatedin the range of the excitation energy up to 150MeV. The calculated fission probabilities Pf(U) are consistent satisfactorily with the experimental data when a nonadiabtic estimation ofthe collective effects was used to calculate the nuclear level density parameters.     

裂变延迟与可能发自超重系统的GDR γ射线

简要评述了裂变延迟系统学研究,论述了用巨仍极共振γ射线方法研究超重系统存在的可能性及这方面理论和实验的研究． The systematics of the fission delay is reviewed. The theory and experiment researches on the formation of the super-heavy compound nucleus by means of Giant Dipole Resonance γ-ray are introduled.     

快中子引起的背向溅射

描述了用实验方法测量快中子引起的背向溅射,测量了Mg、Al、Sc、V、Fe、CO、Cu、Zr、Au和316型不锈钢等10种材料的背向溅射产额,并与正向产额进行了比较,发现背向和正向溅射产额的比值与核反应的类型有关.本实验的结果同其它小组的结果进行了比较,并用溅射理论对实验结果进行了解释.     

25MeV/u 40Ar+209Bi裂变反应的断点激发能和裂变时标测量

对25MeV/u ⁴⁰Ar+²⁰⁹Bi非完全熔合反应中形成的热核,测量了与裂变碎片相符合的α粒子能谱,用运动源模型分解α粒子能谱得到了裂变断前和断后发射α粒子多重性.由断后碎片发射α粒子多重性得到断点激发能约为172.5MeV.由断前α粒子多重性得到激发能在470—600MeV范围内的热核的裂变时标约为4×10^－21S.     

稠密等离子体聚焦装置的中子产额及其稳定性研究

叙述了稠密等离子体聚焦装置(DPF)作为中子发生器的工作原理,讨论了影响DPF中子产额及其稳定性的一些因素和改进措施。利用不同电极形状、不同绝缘气体的场崎变开关可以很好地提高聚焦装置的运行性能,使装置输出中子的起伏由过去的约两个量级降到目前的3倍左右。通过对腔内电极的清洁,在不更换气体的条件下。中子产额无明显下降。     

用于快中子探测的裂变电离室实验及模拟结果比较(英文)

本文报道了一种用于快中子测量的裂变电离室的实验及模拟结果对比,该电离室的裂变材料为238U,分别电镀在电离室的阳极和阴极。裂变电离室通常有三种工作模式:脉冲模式、均方电压模式和电流模式,从而在大动态范围内实现中子注量测量。我们利用252Cf中子源对工作在脉冲模式的裂变电离室效率进行了测量,同时为了评估均方电压模式和电流模式,测量了裂变电离室在不同气压下的脉冲幅度,并通过Geant4蒙特卡罗软件对裂变电离室的脉冲幅度进行了模拟。模拟可以解释实验结果,当工作气压是2.64×105 Pa时探测效率最高[（4.30±0.7）×10-7],且裂变碎片能谱清晰,表明裂变电离室可以工作在不同模式下。