TiN和Ti1-xSixNy薄膜的微观结构分析

使用x射线衍射(XRD)、x射线光电子谱(XPS)、高分辨透射电子显微镜(HRTEM)和原子力显微镜(AFM)多种观测手段分析了TiN薄膜和Ti1-xSixNy纳米复合薄膜的微观结构.实验分析证明Ti1-xSixNy薄膜是由直径为3-5nm的纳米晶TiN和非晶Si3N4相构成,并且Ti1-xSixNy薄膜的表面粗糙度小于相同条件下制备的TiN薄膜,在Ti1-xSixNy薄膜体系的自由能中引入界面能的概念,在此基础上分析了体系中TiN晶粒的取向问题.     

Studies on the Adsorption of Asymmetrical Triblock Copolymers by Scheutjens-Fleer Theory and Monte Carlo Simulation

The adsorption of asymmetrical triblock copolymers from a non-selective solvent on solid surface has been studied by using Scheutjens-Fleer mean-field theory and Monte Carlo simulation method on lattice model. The main aim of this paper is to provide detailed computer simulation data, taking A8-kB20Ak as a key example, to study the influence of the structure of copolymer on adsorption behavior and make a comparison between MC and SF results. The simulated results show that the size distribution of various configurations and density-profile are dependent on molecular structure and adsorption energy. The molecular structure will lead to diversity of adsorption behavior. This discrepancy between different structures would be enlarged for the surface coverage and adsorption amount with increasing of the adsorption energy. The surface coverage and the adsorption amount as well as the bound fraction will become larger as symmetry of the molecular structure becomes gradually worse. The adsorption layer becomes thicker with increasing of symmetry of the molecule when adsorption energy is smaller but it becomes thinner when adsorption energy is higher. It is shown that SF theory can reproduce the adsorption behavior of asymmetrical triblock copolymers. However, systematic discrepancy between the theory and simulation still exists.The approximations inherited in the mean-filed theory such as random mixing and the allowance of direct back folding may be responsible for those deviations.     

冲击波对结晶MgO晶体结构,表面性质和催化剂性能的影响

用ＸＲＤ，ＥＳＲ和ＴＰＤ等技术研究冲击波处理的结晶ＭｇＯ后发现，ＭｇＯ的晶格发生畸变，微应力值ε１／２Ｄ显著增大，有大量缺陷产生并形成Ｆ心，晶体的平均晶粒减小，且表现出各向异性，从而引起了催化剂表面碱中心强度增大，数目变化，在对乙烷氧化脱氢反应中表现出较高的活性和对乙烯的选择性，初步讨论了可能的结构模型和催化机理。     

Thermal Rate Constants of the N（^4S）＋O2（X^3∑g^-） → NO（X^2Ⅱ） ＋O（^3P） Reaction on the ^2A′ Potential Energy Surface

A quasiclassical trajectory study with the sixth-order explicit symplectic algorithm for the N（^4S）＋O2（X^3∑g^-） → NO（X^2Ⅱ） ＋O（^3P） reaction has been reported by employing a new ground potential energy surface. We have discussed the influence of the relative translational energy, the vibrational and rotational levels of O2 molecules on the total reaction cross section. Thermal rate constants at temperatures 300, 600, and 1000 K determined in this work for the reaction are 4.4 × 10^7, 1.8 × 10^10, and 3.1 × 10^11 cm^3mol^-1s^-1, respectively. It is found that they are in better agreement with the experimental data than previous theoretical values.     

磁控溅射技术制备ZnO透光薄膜

采用RF磁控溅射方法,在玻璃衬底上制备了择优取向的ZnO薄膜;通过台阶仪、X射线衍射技术、原子力显微镜和分光光度计分别测量了不同溅射功率条件下淀积的ZnO薄膜厚度(淀积速率)、结晶质量、表面形貌与粗糙度、透光光谱,报道了该薄膜结晶质量、薄膜粗糙度与其在可见光区透光率的关系.     

Finite Degree Holomorphic Covers of Compact Riemann Surfaces

A conjecture of Ehrenpreis states that any two compact Riemann surfaces of genus at least two have finite degree unbranched holomorphic covers that are arbitrarily close to each other in moduli space. Here we prove a weaker result where certain branched covers associated with arithmetic Riemann surfaces are allowed, and investigate the connection of our result with the original conjecture.     

利用光反射精确测量亚共析碳钢的含碳量

本文从光学角度出发提出了一种经济实用、精度高的测量亚共析碳钢中碳的含量的新方法。阐述了该方法的测量原理，即以金相试样表面对光的反射程度来判定其含碳量，并给出了有关经验公式及数据处理方法。     

双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

阴极还原处理对多孔硅发光性能的影响

对经过阴极还原处理后的多孔硅样片进行了光致发光测试和稳定性测试.实验结果表明这种处理能明显改善多孔硅的发光稳定性,使其表面结构更加稳定.利用原子力显微镜对不同还原时间的多孔硅微结构及形貌进行了比较,在一定范围内随着还原时间的增长多孔硅表面粗糙度增大,PL谱增强.     

使用超声估计肌肉疲劳的初步研究

表面肌电信号把神经肌肉活动和肌肉收缩联系起来，已被视为一种估计肌肉疲劳比较客观的方法，但也存在一些不足。另一方面，超声已广泛应用于医学诊断和研究，在骨骼肌方面也有不少研究报道，但还未见文献报道超声用于肌肉疲劳的估计。本文介绍一套自行开发的新的同步连续采集B超图像、力矩和肌电信号的采集系统，并利用它对肱二头肌的肌肉疲劳进行了估计。试验表明在30秒的肌肉疲劳过程中，肌肉厚度会以非线性的方式增加。