La2O3对费-托合成沉淀铁催化剂的影响

制备了一系列不同La2O3含量(100Fe/2.8Si/nLa,n=0,0.5,1,2,4,原子比)的沉淀铁费-托合成催化剂,通过原位X射线衍射、一氧化碳程序升温还原和N2吸附-脱附等手段对催化剂进行了表征.催化剂费-托反应评价在固定床反应器中进行.结果表明,少量La2O3助剂(La/Fe≤0.01,原子比)的加入显著降低了Fe2O3颗粒大小,增加了催化剂的比表面积和分散度,有利于碳化铁的形成,从而导致费-托合成催化活性的提高.随着La2O3含量的进一步增加(La/Fe≥0.02),催化剂表面大量La2O3的覆盖和LaFeO3化合物的形成降低了铁碳化物的形成,反应活性反而降低.因此,最适宜的La2O3含量为La/Fe=0.01.La2O3的加入提高了甲烷的选择性,抑制了C5+碳氢化合物的形成.     

Ba修饰的Pd/A12O3对苯酚液相原位加氢制环己酮反应的催化性能

利用等体积浸渍法制备了一系列不同助剂修饰的Pd/AI2O3催化剂,并考察了催化剂对苯酚液相原位加氢制环己酮反应的催化性能.结果表明,Ba-Pd/AI2O3对苯酚液相原位加氧反应有较优的催化性能.当w(Ba)=3%时,苯酚转化率可比Pd/AI2O3催化剂提高近2倍.在优化的反应条件下,苯酚转化率可达100%,环己酮收率可达80%.利用透射电子显微镜、CO化学吸附、X射线衍射、N2吸附-脱附和CO2程序升温脱附等手段表征了不同Ba含量的Pd/AI2O3催化剂的物理化学性质.结果表明,Ba的添加可明显提高Pd在AI2O3表面的分散度,同时增强了催化剂表面的碱性.这是Ba-Pd/AI2O3对苯酚液相原位加氢制环己酮反应具有较优催化性能的重要原因.     

新型乙炔封端聚酰亚胺的制备及性能

用双酚A型二醚二酐(BPADA)和3-乙炔基苯胺(m-APA)进行缩聚反应合成了乙炔基封端的聚酰亚胺预聚体, 并对预聚体的熔体黏度、稳定性和热性能等进行研究. 结果表明, 此类预聚体具有较宽的加工窗口和较低的加工温度, 适合模压成型工艺制备树脂基复合材料. 预聚体经250 ℃固化后显示了优异的热性能, 动态力学分析显示其玻璃化转变温度为363 ℃, 在氮气和空气气氛下5%热失重温度分别为490和492 ℃.     

Synthesis and Crystal Structure of 1,4,7,10-Tetrakis （2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10- tetraazacyclododecane

A novel molecule tetra-N-alkylation of cyclen （1,4,7,10-tetraazacyclododecane）, 1,4,7,10-tetrakis（2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10-tetraazacyclododecane 2, was synthesized and structurally characterized by single-crystal X-ray diffraction. The molecule turned into chiral helical compound crystals grown from EtOH by slow diffusion at room temperature and three of the four hydroquinone groups of the benzene ring formed a g-electron-rich cavity by C-H…π stacking interaction. The crystal belongs to the monoclinic system, space group P21/C with a = 13.9192（9）, b = 13.2871（6）, c = 22.1894（15）A^°, β = 91.4600（10）°, V = 4102.5（4）A^°3, Z = 4, Dc = 1.219 g/cm^3, C40H52N4O8, Mr = 752.89, F（000） = 1616,μ = 0.088 mm^-1, MoKa radiation （λ = 0.71073）, R = 0.0578 and wR = 0.1389 for 5588 observed reflections with I 〉 2σ（I）. Moreover, compound 2 was characterized with ^1H NMR, ^13C NMR, IR spectra and MS.     

Size control synthesis of sulfur doped titanium dioxide （anatase） nanoparticles, its optical property and its photo catalytic reactivity for CO2 ＋ H2O conversion and phenol degradation

Sulfur doped anatase TiO2 nanoparticles (3 nm−12 nm) were synthesized by the reaction of titanium tetrachloride, water and sulfuric acid with addition of 3M NaOH at room temperature. The electro-optical and photocatalytic properties of the synthesized sulfur doped TiO2 nanoparticles were studied along with Degussa commercial TiO2 particles (24 nm). The results show that band gap of TiO2 particles decreases from 3.31 to 3.25 eV and for that of commercial TiO2 to 3.2 eV when the particle sizes increased from 3 nm to 12 nm with increase in sulfur doping. The results of the photocatalytic activity under UV and sun radiation show maximum phenol conversion at the particle size of 4 nm at 4.80% S-doping. Similar results are obtained using UV energy for both phenol conversion and conversion of CO2+H2O in which formation of methanol, ethanol and proponal is observed. Production of methanol is also achieved on samples with a particle size of 8 and 12 nm and sulfur doping of 4.80% and 5.26%. For TiO2 particle of 4 nm without S doping, the production of methanol, ethanol and proponal was lower as compared to the S-doped particles. This is attributed to the combined electronic effect and band gap change, S dopant, specific surface area and the light source used.     

剪切对玻璃珠填充聚丙烯结晶行为的影响

应用Linkam CSS450剪切仪、广角X射线衍射仪(WAXD)和小角X射线散射仪(SAXS)等研究了剪切对玻璃珠填充聚丙烯结晶行为的影响, 结果表明, 与纯聚丙烯相比, 填加玻璃珠的聚丙烯体系中, 玻璃珠起到成核剂的作用, 不利于β晶的生成. 玻璃珠直径较小(4 μm)时, 剪切对聚丙烯β晶的生成影响较小; 当玻璃珠直径增加到35 μm时, 剪切速率为20 s-1左右最有利于β晶生成; 剪切速率和玻璃珠直径的增加, 有利于聚丙烯片晶的取向, 而且玻璃珠含量越高, 片晶的取向程度越大.     

壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂的合成 及其表面性质的研究

合成了系列壬基酚聚氧乙烯醚型Gemini季铵盐表面活性剂(GNPQA), 用核磁、红外和元素分析对它们的结构进行了表征, 考察了反应条件对转化率的影响, 并用表面张力法和稳态荧光探针法对GNPQA的表面性能及胶束聚集数(N)进行了研究. 结果表明, 较优的反应条件: 反应时间为12 h, 反应温度为70 ℃, 反应原料摩尔比为n(双聚壬基酚聚氧乙烯醚)∶n(三乙胺)∶n(环氧氯丙烷)＝1∶1∶1; GNPQA的临界胶束浓度(CMC)值较相应的单体壬基酚聚氧乙烯醚型季铵盐表面活性剂(NPQA)降低了1～2个数量级, 显示了较高的表面活性; 当GNPQA溶液浓度为5～9倍CMC时, N值随浓度增大而线性增大; 随着氧乙烯(EO)单元数的增长, GNPQA的CMC和N值均逐渐减小; 结合GNPQA的表面性能参数和N值的变化规律, 探讨了这类表面活性剂表面及胶束聚集体的结构形态.     

Syntheses, Crystal Structures and Fluorescence Properties of Two Triazolyl Derivatives with Biphenyl Links

Two novel triazolyl derivatives with biphenyl links, namely 4,4-bis（1,2,4-triazol-1-ylmethyl）biphenylene 1 and 4,4-bis（3,5-dimethyl-1,2,4-triazol-1-ylmethyl）biphenylene 2, have been synthesized and structurally characterized by single-crystal X-ray diffraction. Compounds 1·H2O·HCl and 2·2H2O·2HCl crystallize in the monoclinic system with space group C2/c and P21/c, respectively. The dihedral angles of the two phenyl rings are 30.26（6）° in 1·H2O·HCl, while co-planar （0.00（7）°） in 2·2H2O·2HCl. In 1·H2O·HCl, the N-H…O hydrogen bonds link 1 to form chain-like structures which are further connected by O-H…Cl, C-H…Cl, C-H…O and π-π supramolecular interactions. The hydrogen bonds of O-H…Cl in 2·2H2O·2HCl provide distinguishing P/M helical chains along the b axis, and these chains are further connected by N-H…O hydrogen bonds to generate a 2D structure. Compounds 1 and 2 in methanol solution show much stronger emission bands at 319 nm than biphenyl at 316 nm under excitation at 260 nm.     

药物释放环境对层状复合氢氧化物载体的影响

以层状复合氢氧化物(LDH)为载体用离子交换法制取乙酰苯甲酸(ASP)的插层复合物LDH-ASP, 通过体外释放实验和固相XRD、FT-IR、TEM、TG-DSC及BET-N2比表面积表征, 研究了药物释放环境对载体结构的影响. 结果表明释放环境pH为4.30-6.89时, 载体的层状特征减弱但晶体类型不变; pH为2.48-4.30时, H2PO-4对LDH的嫁接反应引起层状化合物向复杂磷酸盐转化; 随环境pH由6.89降低至2.48, 载体纯度下降, 晶态性征减弱,微孔吸附活性降低.     

金衢盆地加积型红土地球化学特征

金衢盆地广泛分布着不同类型的第四纪红土。通过X射线荧光光谱法（XRF）对金衢盆地的85个样品进行了测试。结果表明：（1）主量元素组成以SiO2、Fe2O3、Al2O3为主,K、Na、Ca、Mg等易溶组分的含量很低,TiO2含量的平均值高于UCC值;（2）MnO含量在网纹红土和均质红土的交界处明显聚集,推测与不同沉积物交界处理化性质突变有关;（3）在剖面上,SiO2、Fe2O3、AkO3等化学成分和硅铝率沿剖面变化的趋势,以及基岩和上覆沉积层的元素组成、化学风化指标和Ti／Zr的区别,均表明所研究的金衢盆地红土剖面具有较好的相似性,与典型的岩石风化壳存在明显差别。