SrHfO3和SrTiO3光学特性的第一性原理研究

用全电势线性缀加平面波法(FLAPW)计算了SrTiO3和SrHfO3的光学特性,即介电函数虚部ε2(ω)、光学吸收系数I(ω)和反射率R(ω).对它们光学特性进行了对比分析,给出了它们光学特性的差别,并进行了解释.计算的SrTiO3光学谱分别在4.4,7.4,8.3和23.6eV处出现峰值,且其在4.4eV处的峰值比较高而尖.计算结果与实验值符合得很好.     

Optical and Acoustical Frequencies in a Nonlinear Helicoidal Model of DNA Molecules

We compare optical and acoustical frequencies in the Peyrard-Bishop-Dauxois model, i.e. an extended Peyrard-Bishop model, of DNA molecules. We discuss how ratio of those frequencies depends on a value of the harmonic constant of the helicoidal spring K. Also, we suggest that the most favourable mode could be a resonance mode.     

FAE爆炸抛撒后云雾液滴尺寸的测量

用光学方法测量悬浮于气相或液相介质中的微小颗粒特性已被广泛地采用。R．A．Dobbins于1963年用简单的方法来单独测定喷雾颗粒平均直径。20世纪70年代采用激光器和自动数据处理系统。液体轴对称抛撒是非定常过程，即在固定位置观察到的液体颗粒尺寸随时间的变化而变化。光线通过含有微粒的介质时会发生光的散射现象，Dobbins根据颗粒散射原理，把满足上限分布函数(ULDF）且直径为几十到几百微米的颗粒散射作为衍射散射处理。     

聚芳香杂环甲烯的三阶非线性光学效应与时间分辨光克尔效应

合成了一系列聚芳香杂环甲烯,包括聚吡咯甲烯和聚噻吩甲烯.采用四波混频法研究材料的共振三阶非线性光学效应(λ＝532nm),其共振二阶超分子极化率γ三阶非线性光学系数分别达到10^-30esu和10^-8esu.选择具有良好溶解性、成膜性的聚吡咯对二甲氨基苯甲烯(PPDMAB),采用飞秒时间分辨光克尔效应方法研究材料的非共振三阶非线性光学效应(λ=790nm).实验表明,翠绿亚胺碱溶液的光克尔信号仅表现一超快响应的成分,归功于π电子云扭转产生的非共振激发.PPDMAB的非共振二阶超分子极化率γ三阶非线性光学系数分别达到γ=5.78×10^-32esu和χ⁽³⁾=1.26×10^-10esu.     

热处理条件对双粉工艺中Bi—2212粉末的相组成影响

实验研究了Bi-2212粉末在空气，8％O2和纯O2种处理的相组成特征，指出通过改变热处理温度和气氛可控制前驱粉中对2223成相影响较大的(Bi，Pb)-2212相，Ca2PbO4相，2201相和14：24AEC等相。     

纳米PIC-I分子聚集体的超辐射和Z-扫描研究

分子聚集体在非线性光学和集成光学等领域有潜在的应用前景。纳米结构一维染料分子J—聚集体有许多既不同于单个分子又不同于体材料的奇异性质，即超辐射和巨光学非线性。这种超辐射是由于在几个本征态内振于强度结合在一起，得到一巨跃迁偶极于，因而是超辐射的。跃迁速率与耦合分子个数N成正比。分子聚集体的J—吸收和超辐射发射是共振的。利用Z—扫描技术测量PIC在不同配比下的非线性折射率、非线性吸收系数和非线性极化率。观测到随着链长变短，样品的三阶非线性极化率增大。对这种非线性增强的机制进行了分析和讨论。     

Optical Fibre Mode Structures Measured by Collection Mode Near-Field Scanning Optical Microscopy

High order fibre mode structures are measured by a near-field scanning optical microscope (NSOM) and are determined to be consistent with the standard fibre LP patterns. The mode-field distortions of high-order mode LP11 and LP21 structures by far-field measurement are analysed based on scalar diffraction theory, and the maximum distortions may reach as high as 5.1% and 6.2%。 This shows that the method of using the NSOM is more accuracy than the far-field measurement method, especially for high-order mode structures of optical fibres.     

海洋激光雷达测量海中悬移质

研制了一套采用倍频YAG激光器的小型海洋激光雷达，用于测量海中悬移质浓度，2000年8月28日至9月5日，该系统安装于“东方红Ⅱ”号右舷下甲板，在渤海海区进行海中悬移质浓度现场测量，通过对18个站位的海洋激光雷达数据分析，获得的表层悬移质浓度与同步测量的海中悬移质浓度结果吻合较好。     

光学偏振实验仿真设计

采用计算机工具软件，成功地设计和编制了偏振现象实验的仿真程序，用于计算机辅助教学     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.