几种吊钩中的力学问题探析

对吊装机械中使用的几种吊钩在吊装重物时的受力情况进行分析和比较,说明了各自的特点及其应用.     

Drop Size Dependence of the Contact Angle of Nanodroplets

The contact angle of nanosized non-polarized argon sessile droplets on a solid substrate is studied by using molecular dynamics simulations. It is found that the drop size dependence of the contact angle is sensitive to the interaction between the liquid molecules and solid molecules. The contact angle decreases with the decreasing drop size for larger interaction between the liquid molecules and the solid substrate, and vice versa. This observation is consistent with most of the previous theoretical and experimental results.     

Wideband Antireflection Film Fabricated by Glancing Angle Deposition

Graded-index ZrO2 films has been fabricated on K9 glass by glancing angle deposition. Because the index mismatch at the interface has been reduced, the film results in wideband high-transmission antireflection. From 400nm to 1200nm, the film reflection is lower than 0.8% and the lowest value is 0.2% at 432nm.     

Luminescence and ESR Studies of CaS：Dy Phosphor

CaS phosphor activated with Dy ions is prepared by the solid-state diffusion method. The phosphor is characterized by x-ray powder diffraction, thermogravimetric analysis and photoiuminescence. Defect centres formed in CaS：Dy are studied using the technique of electron spin resonance. The thermoluminescence glow curve shows peaks at around 117℃ and 345℃. Irradiated CaS：Dy exhibits ESR lines due to defect centres. The thermal annealing behaviour of one of the defect centres appears to correlate with the TL peaks at 117℃ and 345℃. This centre is characterized by an isotropic g-value of 2.0035 and is assigned to an F^＋ centre.     

Dependence of stresses on grain orientations in BCC polycrystalline films on substrates

Most thin films have different thermal expansion coefficients from their substrates, thus thermal stresses will be introduced into the films when the temperature is changed during annealing and service. Calculations of these stresses for grains in various crystallographic orientations have been made for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic and the stresses are equiaxial and without grain orientation （hkl） dependence, the BCC metals may be grouped into two classes. In the first class （Cr, Mo, Nb and V）, the （100）-oriented grains have the largest stresses, while the stresses σ1 and σ2 in other （hkl）-oriented grains decrease linearly with the increase of the angle between （hkl） and （100）, and with σ1 〈 σ2 except in （100）- and （lll）-oriented grains. In the second class （Fe and Ta）, on the contrary, the （100）-oriented grains have the lowest stresses, and the stresses σ1 and σ2 in other （hkl）-oriented grains increase linearly with the increase of the angle between （hkl） and （100）, and with σ1 〉 σ2 except in （100）- and （111）-oriented grains.     

高温超导薄膜在微波双工器上的应用

本文采用全波电磁仿真方法设计、制作并测试了一种工作于C波段的星载高温超导微波双工器,采用的材料是在厚度为0.5mm介电常数为23.5的LaAlO3衬底上用磁控溅射法制备而成的双面氧化物高温超导薄膜YBCO.利用在微波范围内,高温超导薄膜的Q值比常规导体高1～3个数量级的特点,实现了器件的小型化和低插损.     

MOCVD生长的GaN和GaN:Mg薄膜的拉曼散射

通过显微拉曼散射对用金属有机化学气相沉积(MOCVD)法在Al2O3衬底上生长的六方相CaN和掺Mg的P型GaN薄膜进行了研究。在两个样品的拉曼散射谱中同时观察到位于640,660cm^-1附近的两个峰。640cm^-1的峰归因于布里渊区边界(L点)最高声学声子的二倍频,而660cm^-1的峰为布里渊区边界的光学声子支或缺陷诱导的局域振动模。掺Mg的GaN在该处的峰型变宽是Mg诱导的缺陷引起的加宽或Mg的局域模与上述两峰叠加的结果。在掺Mg的样品中还观察到276,376cm^-1几个局域模并给予了解释。同时掺Mg的GaN中出现了应力弛豫的现象,掺Mg引起的失配位错和电子-声子相互作用都有可能对E2模的频率产生影响。     

金纳米薄膜导电和导热性质的实验研究

由于尺寸效应和晶界效应的影响,纳米薄膜在导电和导热方面呈现出与体材料不同的性质.本文实验研究了不同厚度(20～54 nm)金薄膜在不同温度(100～340 K)的导电、导热性质.测量结果显示,薄膜的电导率和热导率比体材料小,洛伦兹数比体材料大,Wiedemann-Franz定律不再成立.随着厚度增加,薄膜的电导率,热导率和电阻温度系数都增加.薄膜热导率随温度变化趋势与体材料相反,随着温度升高而升高.电导率随温度变化趋势与体材料相同,随着温度升高而降低;但薄膜没有体材料对温度变化敏感,导致电阻温度系数下降.     

ZnO-SnO_2透明导电薄膜的制备及性能研究

采用二步成胶工艺制备ZnO-SnO_2透明导电薄膜,应用X射线衍射、原子力显微镜、紫外-可见分光光度计、薄膜分析仪及四探针仪等对薄膜的结构、表面微观形貌、透过率和导电性能进行表征.结果表明,锌锡摩尔比为9/12,退火温度为500 ℃时,薄膜的透过率达90%,电阻率为3.15×10~(-3) Ω·cm.与其它工艺相比,二步成胶工艺所制备出的ZnO-SnO_2透明导电薄膜性能优异.     

Photocatalytic degradation of methyl orange by nano-TiO_2 thin films prepared by RF magnetron sputtering

Nano-TiO2 thin films are deposited by radio frequency （RF） magnetron sputtering using TiO2 ceramic target and characterized by X-ray diffractometer, atomic force microscope, and ultraviolet-visible spectrophotometer. The photocatalytic activity is evaluated by light-induced degradation of methyl orange solutions （5, 10, and 20 ppm） using a high pressure mercury lamp as the light source. The film is amorphous, and its energy gap is 3.02 eV. The photocatalytic degradation of methyl orange solution is the first-order reaction and the apparent reaction rate constants are 0.00369, 0.0024, and 0.00151 for the methyl orange solution concentrations of 5, 10, and 20 ppm, respectively.