同震断层三维裂纹扩展波动时域超奇异积分法

应用波动时域超奇异积分法将P波、S波和磁电热弹多场耦合作用下同震断层任意形状三维裂纹扩展问题转化为求解以广义位移间断率为未知函数的超奇异积分方程组问题;定义了广义应力强度因子,得到裂纹前沿广义奇异应力增量解析表达式;应用波动时域有限部积分概念及体积力法,为超奇异积分方程组建立了数值求解方法,编制了FORTRAN程序,以三维矩形裂纹扩展问题为例,通过典型算例,研究了广义应力强度因子随裂纹位置变化规律;分析了同震断层裂纹扩展中力、磁、电场辐射规律.      

THREE-DIMENSIONAL STATIC ANALYSES FOR FGM PLATES WITH MEDIUM COMPONENTS AND DIFFERENT NET STRUCTURES

A new microelement method for the analyses of functionally graded structures was proposed. The key of this method is the maneuverable combination of two kinds of elements. Firstly, the macro elements are divided from the functionally graded material structures by the normal finite elements. In order to reflect the functionally graded distributions of materials and the microconstitutions in each macro-element, the microelement method sets up the dense microelements in every macro-element, and translates nodes to the same as the normal finite elements by the degrees of freedom of all microelemental the compatibility conditions. This microelement method can fully reflect the micro constitutions and different components of materials, and its computational elements are the same as the normal finite elements, so it is an effective numerical method for the analyses of the functionally graded material structures. The three-dimensional analyses of functionally graded plates with medium components and different micro net structures are given by using the microelement method in this paper. The differences of the stress contour in the plane of functionally graded plates with different net microstructures are especially given in this paper.     

非饱和土渗流和变形强度特性的温度效应

高放核废料地下处置、高压电缆埋设和地热开发等工程的发展,使得温度对非饱和土基本力学性质影响的研究逐渐成为当前岩土工程的热点.从渗流特性和变形强度特性两方面出发,分析了温度对非饱和土基本力学性质的影响. 对于渗流特性,研究了温度对液相水和水蒸气运动的影响,并进一步综述了水热迁移模型的发展. 对于变形强度特性受温度的影响,从试验研究和理论模型入手,研究了非饱和土的变形和强度等随温度的变化规律,并在此基础上对温度的影响进行了总结.文中还指出了现阶段研究中存在的问题及今后的研究方向.      

动静组合加载下花岗岩的力学性能

在霍普金森试验系统上进行了花岗岩动静组合加载试验,获得了花岗岩在动静组合加载下的力学性能.试验结果表明:当动载不变,改变静栽大小,在弹性范围内,花岗岩强度随着静载增大而增大;当静载超过弹性极限时,花岗岩强度迅速降低;在其破坏过程中对冲击能量的吸收随静载增大而减小;变形模量呈现明显的两段特征.当静载不变,改变动载大小,花岗岩的强度随动载增大而增大;变形模量先随动载增大而增大,而后又突然变小,并不出现两段特征;在其破坏过程中对冲击能量的吸收随动载应变率的增大而逐渐增大.所得结果为岩爆、深部破岩等研究提供实验依据.     

求解变分型积分方程的一种新型数值方法——有限变分法

将作者提出的多虚拟裂纹扩展法(MVCE法)拓展为求解变分型积分方程问题的一种新型数值方法——有限变分法(FVM)。它的基本思想是,给定有限个(N个)局部变分模式,将所求解的未知量用适当的方法离散化,针对这N个局部变分模式列出N个方程,求解N个未知系数,从而求得未知量。单一未知变量FVM的最终方程组的系数矩阵通常是一个对称的窄带矩阵,对角元是大数,有很好的数值计算性能。用FVM求解了三维I型裂纹前缘的应力强度因子(SIF)分布。利用基于FVM的通用权函数法计算程序,可以高精度和高效率地求解表面力、体积力和温度载荷共同作用情况下三维裂纹前缘SIF的分布及其时间历程。FVM可以被推广到更广泛的领域,是一个求解变分型积分方程问题的普遍适用的新型数值方法。     

拉伸载荷作用下共面表面裂纹间应力强度因子影响系数的有限元分析

采用参数化有限元方法,结合节点力法和循环迭代算法,对一有限厚矩形板表面有两个相邻共面半椭圆表面裂纹在拉伸载荷作用下进行了求解,得到了两裂纹在不同形状和相隔距离时的应力强度因子的影响系数,计算结果对含三维广布裂纹结构的剩余强度和疲劳寿命有参考意义.     

Circulating turbulent fluidization—A new fluidization regime or just a transitional phenomenon

While circulating fluidized bed （CFB） reactor has many advantages over the more conventional turbulent fluidized bed （TFB） reactor, it does at least have one significant shortcoming-the rather dilute solids volume concentration in CFB reactor gives rise to less ideal reaction intensity. On the other hand, while having higher reaction intensity, TFB reactor has one fatal drawback of particle back-mixing, making it not suitable for certain reactions such as catalytic reaction where the catalyst requires frequent regeneration. This paper describes some key issues in the development of a circulating turbulent fluidized bed （CTFB） reactor that combines the advantages of both TFB and CFB, that is, to have the high reaction intensity as in TFB but and also to have a suppressed solids back-mixing as in CFB due to a continuous net upflow of solids flux through the bed. Experimental results show enough evidence to suggest that a new fluidization regime is formed, the characteristics of which appears to be distinct from those observed in a regular TFB and from those in either the bottom or the upper sections of regular CFB and/or high-density CFB （HDCFB）. Fundamentally, the difference is that particle-particle interaction （collision） dominates the motion of particles in CTFB and TFB, while gas-particle interaction （drag force） is the key element that determines the two phase flow in CFB including HDCFB.     

热蒸发法制备纳米结构ZnO及其生长机理

用热蒸发法于700℃在硅衬底上制备了纳米线、多针状、四脚针状结构的ZnO,研究了衬底与热源间的距离对ZnO形貌的影响.用扫描电镜(SEM)表征了ZnO的形貌,当衬底距热源20mm时,ZnO呈现四脚针状且具有很细的尖端,直径为50nm.X射线衍射(XRD),微区Raman图谱表明四脚针状ZnO是高纯的六角纤锌矿结构.另外,对ZnO不同形貌的生长机理进行了初步研究.     

人体动脉瘤生成与破裂的力学分析

在大变形超弹性理论框架下研究了内压、轴向拉伸和扭转联合作用下人体动脉壁的力学响应,应用结构不稳定性理论对动脉瘤生成的可能性进行了解释,应用材料强度理论对动脉瘤破裂的可能性进行了分析．考虑动脉壁中残余应力和平滑肌主动作用的影响,用纤维加强各向异性不可压超弹性复合材料两层厚壁圆筒模型来模拟动脉壁的力学特性．给出了正常和几种非正常状态下动脉壁的变形曲线和应力分布．变形和稳定性分析结果表明该文模型可以模拟正常状态下动脉壁的均匀变形,还可以模拟在动脉壁中弹性蛋白纤维和胶原蛋白纤维强度降低的非正常状态下动脉瘤生成的可能性及动脉瘤的增长．应力和强度分析结果表明该文模型可以模拟当动脉瘤中的最大应力超过管壁的强度时动脉瘤破裂的可能性．     

光场压缩态的产生及其在亚散粒噪声光学测量和量子信息中的应用

光场压缩态是一种非经典光场,它在超标准量子极限（SQL）的高精度光学测量、超低噪声光通信及量限通信等有着广泛应用前景,是物理学和信息科学交叉前沿研究课题,文章介绍了光场压缩态的产生及它在亚散粒噪声光学测量（sub-shot-noise=limit opical measurement）和量子信息中的重要应用。