基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

超高效液相色谱-串联四极杆静电场轨道阱高分辨质谱法测定豆类中的硒代蛋氨酸

该研究利用超高效液相色谱-串联四极杆静电场轨道阱高分辨质谱(UHPLC/ESI-Q-Orbitrap)技术,对硒代蛋氨酸(SeMet)的色谱信息、分子离子质荷比和碎裂片段的质荷比进行采集,并对特征离子碎裂途径进行解析,建立了豆类中硒代蛋氨酸的检测方法。样品用三羟甲基氨基甲烷-盐酸(Tris-HCl)缓冲溶液溶解后,涡旋混匀,超声提取,在恒温水浴条件下酶解,离心后取上清液过0.22μm滤膜后上机检测。采用Hypersil GOLD HILIC(50 mm×2.1 mm,1.9μm)色谱柱进行分离,以0.2%(体积分数,下同)甲酸6 mmol/L甲酸铵水溶液和0.2%甲酸6 mmol/L甲酸铵乙腈溶液为流动相梯度洗脱,采用电喷雾正离子模式电离,在全扫描/数据依赖扫描模式(Full MS/dd-MS2)下进行检测,基质匹配标准校正法定量。结果表明,硒代蛋氨酸的基质效应为15.75%,在0.05~0.5 mg/L范围内线性关系良好,相关系数(r²)为0.9976,方法检出限(LOD)为0.015 mg/kg,定量下限(LOQ)为0.05 mg/kg;空白样品在0.1、0.2、0.4 mg/kg 3个加标水平下的平均回收率为77.6%~83.2%,日内相对标准偏差(RSDr)为2.8%~4.8%,日间相对标准偏差(RSD_R)为4.1%~6.5%。将方法应用于实际样品的检测,得富硒黑豆、富硒红豆、富硒绿豆中硒代蛋氨酸的含量分别为0.252、0.163、0.184 mg/kg。该方法具有前处理操作简单、结果准确、重复性好等优点,适用于豆类中硒代蛋氨酸的检测。     

超高效液相色谱-串联质谱法测定蜂蜜中胆碱和乙酰胆碱

建立了超高效液相色谱-串联质谱同时测定蜂蜜中胆碱和乙酰胆碱的分析方法.试样采用水-乙腈(体积比2:3)溶液提取,乙腈-水(体积比8:2)稀释后以0.22μm滤膜过滤上机测定.采用ACQUITY UPLC BEH HILIC(100 mm×2.1 mm,1.7μm)色谱柱分离,以10 mmol/L乙酸铵(含0.1％乙酸)...     

超高效液相色谱-四极杆飞行时间质谱法同时测定食品接触用塑料中50种添加剂的迁移量

为评估食品接触用塑料中添加剂的迁移风险,采用超高效液相色谱－四极杆飞行时间质谱（UPLC－QTOF MS）建立了同时测定食品接触用塑料中50种添加剂迁移量的方法。以甲醇和0.01%（体积分数）甲酸－5 mmol/L乙酸铵溶液为流动相进行洗脱,采用目标离子采集（Target MS/MS）模式对目标物的一级离子与二级离子进行监测。结果表明,各物质在0.02～5 mg/L质量浓度范围内线性关系良好,方法检出限为0.01～0.1 mg/kg,加标回收率为92.6%～104%,相对标准偏差（RSD）为0.60%～8.4%。在20款实际样品中有12个样品检出塑料添加剂,其中2个样品检出壬基酚,迁移量为0.033～0.071 mg/kg;6个样品检出抗氧化剂1076和抗氧化剂168,迁移量为0.12～3.3 mg/kg;4个样品检出光引发剂369、光引发剂ITX和光引发剂TPO,迁移量为0.054～4.0 mg/kg。该方法简单、灵敏、准确,适用于食品接触用塑料中50种添加剂迁移量的检测。     

基于超高效液相色谱－串联质谱的不同加工干燥方法下的杜仲代谢组学分析

考察了不同加工干燥方法对杜仲整体代谢产物的影响。分别制备新鲜杜仲、堆置“发汗”、烫泡“发汗”和阴干杜仲样品,进行超高效液相色谱－串联质谱代谢组学分析。通过主成分分析（PCA）、正交偏最小二乘法判别分析（OPLS－DA）等多元统计分析方法,筛选出不同加工干燥方法下杜仲的差异代谢物,比较其相对含量。结果显示,4个组的杜仲样品在PCA得分图中可明显区分。与新鲜杜仲相比,杜仲加工干燥后有170种以上的代谢物发生显著变化,其中超过80%的代谢物表达上调。3种加工干燥方法之间,堆置“发汗”杜仲的上调代谢物数量较多,且有利于木脂素和香豆素类、环烯醚萜类、醌类成分的合成;阴干有利于酚酸类成分的保留,烫泡“发汗”则有利于黄酮类成分的保留。通过比较不同加工干燥方法下杜仲的差异代谢物,为探究杜仲药材的品质形成机制及优选其加工方法提供了科学依据。     

QuEChERS-超高效液相色谱-串联质谱法测定畜禽毛发中5种违禁药物残留

毛发样品采用0.5%乙酸-乙腈提取,经45℃水浴震荡2 h,通过QuEChERS（PLS-A/PSA）分散净化,Agilent ZORBAX SB-Aq色谱柱（3.0 mm×100 mm, 1.8μm）分离,正离子扫描,电喷雾串联质谱多反应监测模式测定,内标法定量。5种违禁药物在0.2～20μg/L范围内线性关系良好（R²>0.997）,阿奇霉素和地西泮检出限（LOD）和定量限（LOQ）分别为0.1μg/kg和0.2μg/kg,氯霉素、金刚烷胺和利巴韦林检出限和定量限分别为0.2μg/kg和0.5μg/kg,回收率范围为84.8%～119.2%,相对标准偏差（RSD）均小于10%。本方法适用于畜禽毛发中5种违禁药物的定性定量分析,可实现对养殖过程的质量安全监管。     

超高效液相色谱-静电场轨道阱高分辨质谱法测定硝苯地平中痕量基因毒性杂质

建立了测定硝苯地平中基因毒性杂质2、6和12的超高效液相色谱-静电场轨道阱高分辨质谱法(UHPLC-Orbitrap HRMS).样品以甲醇为溶剂,提取后直接进样分析.采用ACE EXCELTM 3 C18-AR色谱柱(150 mm×4.6 mm,3μm)分离,流动相为甲醇-0.1％甲酸水(65:35,v/v),等度洗...     

QuEChERS-超高效液相色谱串联质谱法快速测定婴幼儿奶粉中5种黄曲霉毒素含量

建立QuEChERS-超高效液相色谱串联质谱法(UPLC-MS/MS)快速测定婴幼儿奶粉中5种黄曲霉毒素的方法.样品采用QuEChERS法提取之后,使用分散式固相萃取管(EMR-Lipid dSPE)进行净化,选择ACQUITY BEN C18色谱柱(1.7μm,2.1 mm×100 mm)分离,多反应监测采集模式(M...     

《无机化学学报》投稿须知(NOTICE TO AUTHORS)

《无机化学学报》是中国化学会主办的学术期刊,面向国内外发行。主要报道无机化学领域的基础理论和应用基础理论研究成果,促进国内外学术交流,繁荣无机化学学科。内容包括固体无机化学、配位化学、无机材料化学、生物无机化学、有机金属化学、理论无机化学、超分子化学和应用无机化学、催化等,着重报道化合物的合成、热力学、动力学性质、谱学、结构和成键等。     

超亲水疏油材料的制备及其油水分离性能

含油污水的随意排放对海洋、沿海周边环境以及人类健康造成了严重的影响。传统的油水分离方法易造成环境二次污染,同时也是对有限资源的一种损耗。因此,如何高效环保地解决含油污水问题具有重要意义。物理过滤/吸附法被认为是一种高效环保的分离方法,基于仿生学原理,许多可用于物理选择性分离的超亲油疏水和超亲水疏油材料被制备出来。超亲油疏水材料易被油污染,重复利用率低;相比之下,超亲水疏油材料具有自清洁性且重复利用率高,在油水分离方面具有广阔的应用前景。根据基底材料的选择不同,本文综述了金属基以及高分子基超亲水疏油材料的研究现状,总结了其优缺点,并对今后超亲水疏油材料的研究方向和重点进行了展望。