Velocity Measurement Based on Laser Doppler Effect

A novel method for velocity measurement is presented. In this scheme, a parallel-linear-polarization dual- frequency laser is incident on the target and senses the target velocity with both the frequencies, which can increase the maximum measurable velocity significantly. The theoretical analysis and verification experiment of the novel method are presented, which show that high-velocity measurement can be achieved with high precision using this method.     

零售商信息分享对双渠道绿色供应链绩效影响研究

研究了零售商市场需求预测信息分享对双渠道绿色供应链绩效的影响。运用不完全信息动态博弈方法建立并求解零售商信息分享和信息不分享下的绿色供应链决策模型,得到贝叶斯均衡解和各方最优期望利润。研究发现:在双渠道绿色供应链中,若零售商对市场需求预测较为乐观,信息分享使得制造商更有动机提高产品绿色度;此外零售商信息分享总是有利于制造商利润增加,但并非总是使得零售商利润损失。当制造商绿色投资效率较高时,信息分享使得零售商利润增加,反之,信息分享使得零售商利润降低。对整个绿色供应链利润的影响取决于渠道间竞争强度、直销渠道市场份额及制造商绿色投资效率。最后用数值仿真验证了模型和结论的有效性。     

Stokes问题的一个非协调有限元

<正>1引言定常Stokes问题是流体力学中的一种重要问题,是标准的混合问题,速度与压力同时计算.关于该问题有限元求解的文章很多([1],[2],[4],[5],[6],[8],[9]),分析的难点在于单元必须满足离散的Babuska-Brezzi([2])条件.在([4])中提出了著名的非协调Crouzeix-Raviart     

精度与程度的逻辑或近似算子的性质

本文目的是探讨精度与程度的复合,探索新的粗糙集拓展模型.从精度与程度的逻辑或运算出发,定义了精度与程度的逻辑或粗糙集模型.在该模型中,通过变精度近似与程度近似的转化公式,研究了精度与程度的逻辑或近似算子,并得到了该近似算子的幂作用等性质.用精度与程度的逻辑或粗糙集模型统一了变精度粗糙集模型、程度粗糙集模型和经典粗糙集模型,并在这些粗糙集模型中得到了近似算子幂作用的相应性质.     

普朗克卫星与宇宙微波背景辐射

 目前对于宇宙起源的认识主要来自于热大爆炸宇宙理论。根据这一理论,在宇宙的极早期,物质以高温高密的等离子体形式存在,并且处于热平衡状态。由于大量自由电子会与光子频繁发生散射,使得光子的平均自由程很短,宇宙处于不透明的状态。     

三坐标轮廓测量仪测量离轴非球面的数据处理

为了研究三坐标轮廓测量仪测量离轴非球面的数据处理,介绍了三坐标轮廓测量仪测量离轴非球面的原理,对除三坐标测量仪自身误差之外的误差进行了详细的分析,在此基础上建立了校正这些误差的离轴非球面数据处理模型。使用Matlab与C语言混合编程,并进行了数据模拟,对实际离轴非球面进行了测量。在对离轴非球面数据进行模拟时,面形误差PV值小于0.001μm;实际应用时,面形误差PV值约为0.245μm,利用数据处理模型得到的面形误差PV值为1.2μm,达到了三坐标轮廓测量仪本身的测量精度。结果表明,所建立的数据处理模型和处理软件是正确的。     

Research on lenses assemble precision in complicate laser amplification system

In a certain amplification system, signal laser can be amplified from 1 nJ to 5 J. To realize a high quality imaging transfer, meet beam diameter expansion requirement, and get good filtering effects, three spatial filters are designed and assembled. Lenses in these spatial filters can be assembled and adjusted by their reflection spots to meet wave-front requirements. In this letter, we analyze precision of the assembling, and make a ray-tracing simulation to discuss the relation between assembling precision and lenses parameters. On the optimized distance of 1000 mm, adjusting precision of lens tilt can reach 5 mrad.     

基于月球探测数据的月面地形重构方法研究

在比较不同探月任务取得的月表三维影像数据的基础上,选择中国嫦娥一号全月分幅数字高程模型（DEM）数据作为构建月表地形模型的数据源,并利用ArcGIS、Cass和AutoCAD等软件的功能及其之间的连接关系,研究了基于月球探测数据构建月表三维模型的技术和方法。以月表撞击坑Lichtenberg为例,建立了撞击坑的三维地形模型,并对其精度和影响精度的因素进行了分析。分析结果表明,对于500m分辨率的原始数据,模型误差较小,产生误差的原因主要包括生成等高线的密度、采点间距等因素。     

Effect of the nonlinearity of the CCD in Fourier transform profilometry on spectrum overlapping and measurement accuracy

In Fourier transform profilometry (FTP), we must restrain spectrum overlapping caused by the nonlinearity of the charge coupled device (CCD) and increase the measurement accuracy of the object shape. Firstly, the causes of producing higher-order spectrum components and inducing spectrum overlapping are analysed theoretically, and a simple physical explanation and analytical deduction are given. Secondly, aiming to suppress spectrum overlapping and improve measurement accuracy, the influence of spatial carrier frequency of projection grating on them is analysed. A method of increasing the spatial carrier frequency of projection grating to restrain or reduce the spectrum overlapping significantly is proposed. We then analyze the mechanism of how the spectrum overlapping is reduced. Finally, the simulation results and experimental measurements verify the correction of the proposed theory and method.