二次升压的重复频率脉冲电源

介绍一种采用脉冲变压器二次升压工作方式实现高电压脉冲输出的设计电路，电路的主要特点是可以对电容负载实现快速充电，通常其充电时间可控制在几百纳秒内。由于在电路中的开关器件为氢闸流管和磁压缩装置，因此系统具有千赫兹的连续重复频率工作能力。目前，以这种方式工作的重复频率脉冲电源系统，脉冲调制过程的能量传输效率大于70％，输出脉冲电压大于600kV，连续重复频率大于100Hz.     

具有非单调功能反应和脉冲扰动的捕食系统的研究

研究捕食者具有非单调功能反应和周期脉冲扰动的捕食者一食饵系统，利用脉冲微分方程的Floquet理论和比较定理，得到了系统灭绝和持续生存的充分条件．最后，通过数值模拟阐明系统在周期脉冲扰动下的复杂性．     

高功率固体激光放大系统相位自校正方法研究

就光学元件间低频相位误差叠加提出用相关系数作为叠加相位结果的估计参量，并通过模拟计算和验证实验证明了相关系数能有效地对低频相位叠加结果进行比较估计，在此基础上就高功率固体激光放大系统中放大片的选取和安装提出了自校正方法并实现了自校正过程。     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.     

2MeV注入器脉冲电子束时间分辨能谱诊断研究

 介绍了利用磁分析器和电子束产生的契伦科夫辐射光诊断直线感应加速器脉冲电子束时间分辨能谱的原理、方法及诊断系统，对中物院2MeV感应叠加型注入器的2kA强流脉冲电子束时间分辨能谱进行实验诊断，并与二极管电压进行对比分析。测得能量约2.2MeV，60ns内最大能量变化为4%。     

双预脉冲驱动X射线激光实验研究

 在“星光-Ⅱ”激光装置上进行了双预脉冲驱动类氖铬X射线激光实验，介绍了实验方法和实验结果，并对结果进行了简短讨论。由于目前“星光”装置输出能量较低，所进行的双预脉冲驱动未能显著提高X射线激光强度，改变预脉冲幅度时X射线激光强度也未有显著变化。利用MED103程序进行了模拟计算，其结果与实验结果一致。     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

Generation of Ultrashort Light Bullets in Dispersive Kerr Media Using the Fourth—Order Dispersion—Dependent Spatiotemporal Instability

A new method for generation of a train of ultrashort pulses or a sequence of ultrashort light bullets is proposed. This method is based on the fourth-order dispersion-dependent spatiotemporal instability in dispersive Kerr media. The repetition-rate of the generated bullets can be made quite large by increasing the corresponding spatial modulation frequency locating in the new instability region resulted from fourth-order dispersion.     

毛细管放电X光激光装置中的预脉冲电源

 针对目前毛细管放电X 光激光装置产生的预脉冲电流幅值过大、持续时间较短的问题，提出了增加预脉冲开关抑制原有预脉冲，再外加由脉冲成形网络组成的预脉冲发生器，产生所需预脉冲的改造方案。可在主脉冲来临之前产生幅度10~50A，持续时间约17μs的方波预脉冲电流，来满足毛细管放电泵浦类氖氩X光激光实验的需要。     

Bush连续不可微函数的分形性质

本文对用递推关系确定的Bush连续不可微函数,找出了迭代函数系(IFS),从而得到它的级数表达式和所具有的自仿射分形的有关性质.最后还计算出函数图象的Hausdorff 维数的准确值.