高功率微波高斯馈源口面场分析

 用波导本征模展开方法对用于高功率微波发射系统的方角锥高斯馈源口面场进行分析，提出结合馈源远场辐射特性和避免高功率击穿折衷选定相应的高斯模注腰半径，进而确定多个波导模幅值，从而为运用模匹配或耦合波理论设计高斯馈源提供依据。     

环面上具有间断梯度的势函数的模拟退火

本文证明了环面上具有间断梯度的势函数的模拟退火过程：dXt=-VU(Xt)dt √2dWt概率收敛到势函数的全局极小集附近。     

LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.     

Optical Fibre Mode Structures Measured by Collection Mode Near-Field Scanning Optical Microscopy

High order fibre mode structures are measured by a near-field scanning optical microscope (NSOM) and are determined to be consistent with the standard fibre LP patterns. The mode-field distortions of high-order mode LP11 and LP21 structures by far-field measurement are analysed based on scalar diffraction theory, and the maximum distortions may reach as high as 5.1% and 6.2%。 This shows that the method of using the NSOM is more accuracy than the far-field measurement method, especially for high-order mode structures of optical fibres.     

高功率固体激光放大系统相位自校正方法研究

就光学元件间低频相位误差叠加提出用相关系数作为叠加相位结果的估计参量，并通过模拟计算和验证实验证明了相关系数能有效地对低频相位叠加结果进行比较估计，在此基础上就高功率固体激光放大系统中放大片的选取和安装提出了自校正方法并实现了自校正过程。     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.     

数字全息中再现像分离问题的研究

详细分析了数字全息的再现像分离条件,指出数字全息和普通全息的再现像分离条件之间的区别,同时也讨论了再现条件对数字全息记录光路的要求,同时给出一种能部分避免再现像重叠的处理方法,并做出相应的实验验证.     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

Stancu-Sikkema算子的点态估计

本文构造了Stancu—Sikkema算子,并利用点态光滑模研究了此算子的点态逼近正逆定理.