Synthesis of GaN Nanorods by Ammoniating Ga2O3/ZnO Films

Large quantities of CaN nanorods are successfully synthesized on Si（111） substrates by ammoniating the films of Ga2O3/ZnO at 950℃ in a quartz tube. The structure, morphology and optical properties of the as-prepared CaN nanorods are studied by x-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and photoluminescence. The results show that the CaN nanorods have a hexagonal wurtzite structure with lengths of several micrometres and diameters from 80 nm to 300hm, which could supply an attractive potential to harmonically incorporate future GaN optoelectronic devices into Si-based large-scale integrated circuits. The growth mechanism is also briefly discussed.     

A Partial Differential Inequality in Geological Models

Sedimentation and erosion processes in sedimentary basins can be modeled by a parabolic equation with a limiter on the fluxes and a constraint on the time variation.This limiter happens to satisfy a stationary scalar hyperbolic inequality,within a constraint,for which the authors prove the existence and the uniqueness of the solution.Actually,this solution is shown to be the maximal element of a convenient convex set of functions.The existence proof is obtained thanks to the use of a numerical scheme.     

A Novel Analytical Approach for Multi-Layer Diaphragm-Based Optical Microelectromechanical-System Pressure Sensors

An optical microelectromechanical-system （MEMS） pressure sensor based on multi-layer circular diaphragm is described and analysed by using the proposed novel analytical approach and the traditional transfer matrix method. The analytical expressions of the deflection of multi-layer diaphragm and absolute optical reflectance are derived respectively. The influence of residual stress on the deflection of diaphragm is also analysed. Simulation results given by the finite element method are consistent with the ones which are analysed by using the analytical approach. The analytical approach will be helpful to design and fabricate the optical MEMS pressure sensors with multi-layer diaphragm based on Fabry-Perot interferometry.     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

一维CO2光学晶格中的光子带隙

本文研究了囚禁^85Rb原子的一维CO2光学晶格的光子带隙。由于大失谐CO2聚焦光束（λ=10．6μm）远离Rb原子的共振频率，原子与晶格光场的自恰作用可忽略，Rb原子被囚禁在周期为d=λ／2=5．3μm的周期性格点上，且单个格点上囚禁的原子数目可以达到10^3，整个晶格形成具有空间周期性调制的介电多层膜系。类似于光子晶体，其光学响应将在晶格频率与共振频率之间产生光子带隙。另一方面，     

ICP-AES测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量

采用电感耦合等离子体-原子发射光谱法同时测定彩涂前处理表面调整转化层中Ti、Ni含量及钝化膜中Cr含量.以表征表面调整转化层厚度及钝化膜厚度,采用本方法准确度高、快速简便,经试验结果令人满意.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

TiN/Al2O3纳米多层膜的共格外延生长及超硬效应

采用多靶磁控溅射法制备了一系列具有不同Al2O3调制层厚度的TiN/Al2O3纳米多层膜.利用X射线能量色散谱、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜和微力学探针表征了多层膜的成分、微结构和力学性能.研究结果表明,在TiN/Al2O3纳米多层膜中,单层膜时以非晶态存在的Al2O3层在厚度小于1.5 nm时因TiN晶体层的模板效应而晶化,并与TiN层形成共格外延生长,相应地,多层膜产生硬度明显升高的超硬效应,最高硬度可达37.9 GPa.进一步增加多层膜中Al2O3调制层的层厚度,Al2O3层逐渐形成非晶结构并破坏了多层膜的共格外延生长,使得多层膜的硬度逐步降低.     

薄原子蒸汽膜的双光子光谱及Dicke窄化

薄原子蒸汽膜的单光子Dcike窄化吸收光谱可以拓展到双光子情形，以级联三能级系统为例,从理论上得到了亚多普勒结构的双光子吸收光谱，其线型表现出和单光子过程相似的与膜厚和探测光波长的比值(L/λ)相关的周期性.当L/λ=(2n+1)/2(膜厚为半波长的奇数倍)时，吸收谱线窄化现象明显.当L/λ=2n/2(膜厚为半波长的偶数倍)时，单光子情形的谱线窄化现象消失，而双光子情形的谱线仍表现为亚多普勒结构，尤其在异侧入射的情形下，可以获得极窄的双光子谱线结构. 这种结构来自原子与腔壁碰撞的消激发效应和双光子过程的抽运-探测机制的贡献. 关键词： 薄原子蒸汽膜 双光子光谱 Dicke窄化     

三代像增强器用微通道板的改进与发展

简要说明了三代像增强器的特点，分析了微通道板的离子反馈形成机理，给出有效抑制离子反馈对光阴极造成伤害的2种方法，即一种是减少和清除微通道板的吸附气体，另一种是阻止反馈离子反馈到光阴极上。介绍了国外最新的三代像增强器，以及使用优化改进的高性能微通道板显著减薄甚至彻底去除微通道板离子反馈膜的方法，该方法能维持砷化镓光阴极足够长的工作寿命，还介绍了最新发展的体导电微通道板和硅微通道板。指出高可靠性无膜选通砷化镓像增强器技术的实现，不仅需要微通道板在抑制离子反馈方面取得突破，还需要砷化镓光阴极在耐受离子反馈能力上进一步提高，同时还要结合和拓展选通电源的应用。