Ni－La_2O_3复合镀层的氧化行为及机制

通过对金属镍、镍镀层及Ｎｌ－Ｌａ２ｏ３复合愤层于９００℃、１０００℃时的恒温氧化实验，发现Ｎｌ－Ｌａ２Ｏ３复合镀层的氧化行为明显改善。高分辨电子显徽镜（ＨＲＥＭ）的观测研究表明，Ｎｉ－Ｌａ２Ｏ３复合铰层氧化时，纳米尺寸的ｋａ２Ｏ３颗粒掺人到氧化层中，形成了ＮｉＯ－Ｌａ２Ｏ３复合氧化物层；在氧化层晶界发现了异常原子排列的新现象。由此认为，Ｎｉ－Ｌａ２Ｏ３复合镀层抗高温氧化性能的提高，主要归因于小尺寸的纳米颗粒可微量溶解，成为Ｌａ（３＋）的晶界们聚“源”，阻止Ｎｉ（２＋）的短路向外扩散，从而改善了氧化层的微观结构和生长机制。     

Keggin结构多金属氧酸盐α-[SiWl2O40]^4-的从头算理论研究

采用从头算Hartree—Fock方法对具有Keggin结构的多金属氧酸盐离子α-[SiW12O40]^4-进行优化．以基态几何为基础，进行单激发组态相互作用(CIS)计算．结果表明，WO6单元形成扭曲的八面体，而SiO4部分仍具有准四面体结构；阴离子的4个三金属簇W2O13可容纳3～4个负电荷，从微观结构上揭示了杂多阴离子拥有大量负电荷仍能稳定的原因．     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

Study on Tonghaosu and Its Analogs： Isolation, Structure Identification and Synthesis of Antifeedant B-ring-homo-tonghaosu

The methanolic extract from a Chinese endemic Chrysanthemum plant, Dendranthema indicum var. aromaticum, was found to show high antifeeding activity against Pieris brassicae L., and by bioassay-guided separation, the active component, B-ring-homo-tonghaosu, 2-(2‘,4‘-hexadiynylidene)-1,6-dioxaspiro-[4,5]-dec-3-ene (2) was isolated. Its structure was elucidated by comparing its spectroscopic data with those of 2 reported in the literatures. Furthermore new convenient total synthesis methods of B-ring-homo-tonghaosu were also developed to confirm its structure and make its further application in crop protection available. In addition, extensive comparison of spectroscopic data showed that the structure of compound 21 reported in literature should be revised to 2.     

基于新型核与灰度序列的时滞GM(1,N)模型及其应用

为了解决GM(1,N)模型在新型核与灰度的基础上,对驱动项的延迟作用机理不明确的问题,将时滞参数引入到GM(1,N)模型的驱动项中,构建了基于新型核与灰度的时滞GM(1,N)模型,分析了时滞参数的辨识方法,讨论了新模型的建模机理。为了更好地对该模型的有效性进行验证,将优化的时滞GM(1,N)模型对南京市的雾霾进行预测分析,选择GM(1,N)模型、一元回归模型与文中的优化模型进行对比。结果显示,优化模型对PM₁₀浓度的拟合精度更高,且误差均控制在5%之内,从而验证了提出的优化模型适用于具有时滞特征数据的模拟和预测。     

负载型纳米非贵金属催化剂上一氧化碳的氧化 Ⅲ.纳米Cu/γ-Al_2O_3催化剂预处理对催化剂活性的影响

以电弧等离子体法制备纳米铜活性组分．将物理法制备的负载型纳米Ｃｕ／γ－Ａｌ２Ｏ３催化剂用于催化一氧化碳氧化反应，发现在催化过程中其催化活性呈规律性变化，即初始活性较低；空气中焙烧预处理易使纳米粒子长大．催化剂的氧化与一氧化碳还原实验表明，铜氧化物活性高于零价铜     

尼龙－1010的聚集态结构

用ＷＡＸＤ、ＤＳＣ、方差－范围函数．密度测量等方法，研究了经不同热处理的尼龙－１０１０的聚集态结构．发现退火处理更有利于尼龙－１０１０结晶的生成和稳定，且尼龙－１０１０的结晶，有一个最佳的热处理温度．在该温度附近，尼龙－１０１０的结晶度和微晶尺寸里最大值．     

含氮亲核试剂在2-甲磺酰基-5-(3,4,5-三甲氧基苯基)-1,3,4-噁二唑环上取代反应的研究

2,5—二取代—l,3,4—噁二唑化合物具有消炎,抗菌,调节植物生长,杀虫门等广泛的生物活性。作者曾研究了取代胺在2—甲磺酰基—5—(2—苯基—4—喹啉基)—1,3,4—噁二唑化合物环2—位上的亲核加成消去反应,制得了一系列新的2—取代基—5—(2—苯基—4—喹啉基)—1,3,4—噁二唑衍生物,并发现它们具有一定的抗菌活性。在此基础上,我们又研究了含氮亲核试剂在 2—甲磺酰基—5—(3,4,5—三甲氧基苯基)—1,3,4,—噁二唑环2—位上的亲核加成消去反应,制得一系列新的2—取代基—5—(3,4,5—三甲氧基苯基)—1,3,4—噁二唑衍生物。作者用3,4,5—三甲氧基苯甲酰肼在KOH催化下与CS_2反应得到2—巯基—5—(3,4,5—三甲氧基苯基)—l,3,4—噁二唑1,1在NaOH溶液中与Me_2S0_4作用得到2—甲硫醚—5—(3,4,5—三甲氧基苯基)—1,3,4—噁二唑2,2在冰醋酸水溶