铝(Ⅲ)-桑色素-十二烷基硫酸钠体系在滤纸基质的荧光反应研究及其分析应用

本文探讨了在滤纸基质上表面活性剂SLS对铝-桑色素荧光反应的增敏作用及最佳实验条件。铝含量在0～6.0ng范围的工作曲线呈良好的线性关系(r=0.9998),方法的检测限为0.001ng。含铝4.0ng的溶液11次测定结果的相对标准偏差为4.3％。方法用于含铝水样的测定获得满意结果,回收率为96.0～100.5％。     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

磁场对含稀土铝锂合金断裂特征的影响

以含铈铝锂合金为研究对象，研究了磁场对含稀土铝锂合金时效过程的影响，从断裂特征及微观组织两方面分析了磁场作用规律。实验结果表明：未加磁场时，合金的断裂特征以理断裂为主；扁平晶粒厚度不匀，在磁场作用下，此合金的断裂特征与微观组织发生明显改观，随磁感应强度增强，合金主断裂面上准解理断裂特征减弱，同时二次裂纹增多，分层比较升高；扁平晶粒厚度变薄，尺寸趋于均匀。用少体物理理论，探讨了磁场对含稀土合金原子扩散过程的影响，为进一步研究稀土元素在磁场中的行为及其局域效应提供了一定的实验依据。     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

CuCrAl和CuCrZr低温液相合成甲醇催化剂的研究

 用络合共沉淀法制备了CuCrAl和CuCrZr复合氧化物液相合成甲醇催化剂，其比表面分别达到119和116m2／g．在5．0～5．5MPa和383K条件下，分别用间歇式和流动式反应釜考察了催化剂的活性和稳定性．结果表明：CuCrAl和CuCrZr的活性均明显高于CuCr；CuCrAl的活性略高于CuCrZr，但甲酸甲酯（MF）的选择性明显低于CuCrZr；两者在12h内未见活性明显下降．甲醇钠在反应过程中部分转化为甲酸钠和NaOH．CuCrAl和CuCrZr有较高的氢解活性可抑制甲醇钠与MF生成甲酸钠，从而有较低的甲酸钠浓度．但是，Al2O3和ZrO2的酸性有利于甲醇脱水，引起甲醇钠水解生成NaOH．溶剂对CuCr基催化剂的活性和选择性有明显影响．对反应机理进行了讨论．     

Effect of Drying Methods on the Structure and Combustion Activity of Mn—Substituted Hexaaluminate Catalysts

Conventional oven drying (COD) and supercritical drying (SCD) methods were applied to the preparation of Mn-substituted hexaaluminate (BaMnA111O19-α) catalysts. The effect of drying methods on phase composition, specific surface area, pore structure, reduction behavior of Mn^3 ions, and combus-tion activity of the samples was investigated. The homogenous mixing of the components in the sol-gel process could be maintained by SCD, and the hexaaluminate phase was almost the only phase of the resulting materials after calcination. H2-TPR revealed that the Mn^3 ions in the sample obtained by SCD were easier to be reduced than that by COD. Moreover, the samples obtained by SCD have higher surface area, narrower pore size distribution, and higher combustion activity than those obtained by COD.     

橡胶中简单剪切与纯剪切的关系

研究了简单剪切与纯剪切的关系，得出了：（１）简单剪切可看成纯剪切加转动，转动角θ有；（２）若简单剪切椭圆的长轴与坐标轴Ｘ的夹角为φ，相应的纯剪椭圆长袖与坐标轴ｙ的夹角为β０，则φ＝β０；（３）橡胶在双向拉伸时剪应变γ的一般表达式为，对简单剪切而言即为     

完美骨架全硅β沸石性质研究Ⅰ.合成全硅β沸石与脱铝β沸石的性质比较

以四乙基氢氧化铵为模板剂,正硅酸乙酯为硅源,静置水热法合成全硅β沸石.用硝酸(13 mol/L)对硅铝比(Si/Al)为20的Na-β沸石回流脱铝.焙烧后的上述两样品经粉末X射线衍射、低温氮吸附、核磁共振、红外光谱、吸附等温线等表征,发现合成的全硅β沸石骨架与孔道结构完美并具有很高的表面疏水/亲有机物的吸附特性.