温度对纳米ZnO膜电学光学性质影响的研究

关键词：     

原位复合材料研究进展

本文综述了近年来原位成纤复合材料的研究状况，介绍了得到广泛应用的两大类原位成纤复合体系，分别讨论了它们的成纤机理、影响成纤的条件及组分间的相互影响，并介绍了此类复合体系的流变性能及物理、机械性能以及它们随组分含量和加工条件变化的规律。     

热重分析技术研究聚-α-甲基苯乙烯降解温度

采用热重分析技术研究了4种聚-α-甲基苯乙烯原料和其它微球壳层材料的热降解温度。研究表明,聚-α-甲基苯乙烯原料主要失重温度范围为220～340℃,等离子体辉光放电涂层材料的降解温度为350～450℃。升温速率在20℃/min和30℃/min时,降解温度基本相同,升温速率不影响降解的温度范围,低于20℃/min时,随着升温速率升高,降解温度升高。     

用于光纤熔接系统的纤芯检测镜头设计

光纤已广泛应用于当今社会的信息传输领域。为了满足长距离光纤传输中高质量光纤熔接的需要,介绍了一个应用于光纤熔接系统的透射光纤纤芯检测系统。该系统中的核心器件是一组能对光纤纤芯成像的特殊镜头。借助于ZEMAX软件,设计了这组检测镜头。该镜头具有8倍放大倍率、长工作距离、短结构、高精度等特点。论述了镜头的设计方案和设计过程,并给出了满足要求的设计结果。通过在LightTools软件中对整个系统检测结果的模拟,证明了该设计的可行性。     

基于硅基槽波导的单纤三向滤波器的研究

设计了基于硅基槽波导的微环谐振型单纤三向滤波器。基于电磁场理论得到了二维情形下的硅基槽波导的模场及有效折射率随波长的变化关系,在此基础上,利用硅基槽微环谐振腔谐振波长与微环半径的关系,优化得到了可将1490nm和1550nm两个下载波长分开的谐振环半径,并同时将1310nm波长上传,三个波长信号从不同端口输出,成功地实现了三向器滤波功能。利用传递函数法模拟了所设计的硅基槽微环谐振型三向滤波器的输出光谱,结果显示其串扰可低至-16.9dB。     

Polar Mixing Optical Phonon Spectra in Wurtzite GaN Cylindrical Quantum Dots： Quantum Size and Dielectric Effects

The interface-optical-propagating （IO-PR） mixing phonon modes of a quasi-zero-dimensional （QOD） wurtzite cylindrical quantum dot （QD） structure are derived and studied by employing the macroscopic dielectric continuum model. The analytical phonon states of IO-PR mixing modes are given. It is found that there are two types of IO-PR mixing phonon modes, i.e. p-IO//z-PR mixing modes and the z-IO//p-PR mixing modes existing in QOD wurtzite QDs. And each IO-PR mixing modes also have symmetrical and antisymmetrieal forms. Via a standard procedure of field quantization, the Frohlich Hamiltonians of electron-（IO-PR） mixing phonons interaction are obtained. Numerical calculations on a wurtzite GaN cylindrical QD are performed. The results reveal that both the radial-direction size and the axial-direction size as well as the dielectric matrix have great influence on the dispersive frequencies of the IO-PR mixing phonon modes. The limiting features of dispersive curves of these phonon modes are discussed in depth. The phonon modes ＂reducing＂ behavior of wurtzite quantum confined systems has been observed obviously in the structures. Moreover, the degenerating behaviors of the IO-PR mixing phonon modes in wurtzite QOD QDs to the IO modes and PR modes in wurtzite Q2D QW and QID QWR systems are analyzed deeply from both of the viewpoints of physics and mathematics.     

Inhomogenous Dislocation Nucleation Based on Atom Potential in Hexagonal Noncentrosymmetric Crystal Sheet

By introducing internal degree, the deformation of hexagonal noncentrosymmetric crystal sheet can be described by the revised Cauchy-Born rule based on atomic potential. The instability criterion is deduced to investigate the inhomogeneous dislocation nucleation behavior of the crystal sheet under simple loading. The anisotropic characters of dislocation nucleation under uniaxial tension are studied by using the continuum method associated with the instability criterion. The results show a strong relationship between yield stress and crystal sheet chirality. The results also indicate that the instability criterion has sufficient ability to capture the dislocation nucleation site and expansion. To observe the internal dislocation phenomenon, the prediction of the dislocation nucleation site and expansion domain is illustrated by MD simulations. The developed method is another way to explain the dislocation nucleation phenomenon.     

各向异性蜂窝夹芯材料的电磁传输性能分析算法研究

蜂窝夹芯结构作为天线罩最常用的透波材料, 其电各向异性特征对电磁传输性能具有不可忽略的影响. 本文基于各向异性蜂窝夹芯材料对电磁波水平极化和垂直极化分量的有效介电常数, 建立了多层蜂窝夹芯材料的等效传输线网络传输方程, 并给出了其传输系数的计算公式.该计算公式由于考虑了材料的三维各向异性特征, 不仅理论上可以计算多层各向异性介质板对任意方向入射电磁波的传输系数, 而且能够揭示出材料方向角对传输性能的影响规律.同时, 通过传输线网络等效, 其计算效率远高于有限元等方法.数值算例表明, 本方法能够有效地揭示蜂窝夹芯材料的各向异性对其传输性能的影响, 计算结果在入射角为0°–80° 时与有限元法符合很好. 关键词： 电磁传输性能 电各向异性介质 蜂窝夹芯材料     

纤锌矿结构Zn1-xMgxO电子结构及吸收光谱的第一性原理研究

采用第一性原理计算方法,计算了纤锌矿结构Zn_1-xMg_xO(x=0,00625,0125,025)的电子结构及吸收光谱. 计算结果表明,Mg的掺入使ZnO的电子结构发生了较大的改变,与Mg邻近的O原子得到电子的数目明显增大,进而O原子返回部分电子给邻近Zn原子. Zn-O间相互作用减弱,禁带宽度变大,这也从同一合金中Zn4s上移的程度得到证实. 其吸收光谱也随着Mg的掺入出现蓝移现象,其吸收边对应波长分别为379, 关键词： 第一性原理计算 电子结构 吸收光谱 纤锌矿结构ZnO