蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

Controlling the gain shape of Er^3＋—doped fluorozirconate fibre amplifier by a coherent field

We proposed a four-level system to explore the quantum interference effects on optical amplification.We found that the gain of the probe.including positions and values of gain peaks,can be adjusted by changing the coherent field and the incoherent pumping.At the same time,we can also modify the absorption profile of electromagnetically induced transparency by the incoherent pump.The results provide a method to flatten the gain of Erbium-doped fibre amplifiers.     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

POROSITY CALCULATION OFMIXTURES OF FIBROUS PARTICLES

The initial forming of fiber blend to high green density, i.e. the packing of fibrous particles, is important to the reinforcement of composite materials. It is very useful to develop a general predictive method for the optimum selection of particle mixtures for the property control of ceramic or composite products. This paper presents such a mathematical model developed on the basis of the similarity analysis between the spherical and non-spherical particle packings and assesses its applicability to the packing of fibrous particles with discrete and/or continuous length distributions. The results indicate that the model can predict this packing system well and hence provide an effective way to solve various packing problems in the composite materials processing.     

一个非协调膜元的高精度分析

本文讨论一个四自由度三角形非协调膜元的整体超收敛性，外推和亏量校正。     

2,3-二硫甲基-6,7-二硫十六烷基四硫代富瓦烯的合成

Langmuir-Blodgett(简称LB)法作为分子水平的成膜技术,能制备纳米级几乎无缺陷的单分子层或多分子层膜,在微电子学,分子器件,磁性有序材料,生物膜等方面有广泛的应用前景。目前,四硫富瓦烯类衍生物作为导电LB膜材料的研究,引起人们极大的兴     

腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

金属表面生成氧化膜在电解质中的电位

测量金属表面生成氧化膜在电解质中的电位时,金属/氧化膜/电解质/参比电极构成了多电极体系,其中包括3个电池,由3个电池之间的关系、电池过程中所有的电化学反应、电荷传输步骤和化学反应步骤,导出电位的普遍适用的公式: E=E_a⁰+sum from s=1 to 3|η_t,s|-1/(ne)v₇ΔG₇, E=E_c⁰-sum from s=4 to 6|η_t,s|+1/(ne)v₈ΔG₈.当金属/氧化膜/电解质电池受到不同的步骤控制时,可以得到不同的简化公式.     

STM在微细加工中的应用

 已提出的各种可能机理有束流引起的化学反应,高电流密度使表面局部区域内原子加热导致的局部原子的蒸发、熔化、再结晶等,有些结构可能是由于污染物或针尖材料在表面上的沉淀而产生的.当样品表面有覆层或处于特定的气体或液体氛围下时,用STM仍可在其上产生各种细微结构,其主要方法可分为两类,其一是电子束光刻,其二是电子束辅助淀积和刻蚀,以下分别进行讨论。