Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

双脉冲电子束源实验

2MeV直线感应加速器注入器系统由电子束产生器和脉冲功率系统组成。电子束产生器包括由感应腔组成的阴极电压叠加器、阳极电压叠加器和真空二极管及束输运系统。脉冲功率系统则包含初级功率源Marx、次级功率源Blumlein线和触发系统，其作用是为感应腔提供一个具有数十纳秒平顶宽度的高压脉冲，激发感应腔在感应腔间隙上获得一个加速电场。在2MeV注入器功率系统中，4个Blumlein线的充气开关是由发散装置的输出触发信号进行导通控制的。通过控制发散输出触发信号到达Blumlein线开关的时间，即可以实现Blumlein线开关在不同时间内触发导通，使Blumlein线依据所设定的时间顺序输出激励脉冲，从而在真空二极管上获得高压脉冲串。由于功率系统采用的是182C结构，即一根Blumlein线驱动两个感应腔，因此最多可以实现四脉冲串列。     

脉冲中子探测系统的中子灵敏度能量响应

为了获得脉冲中子探测系统的中子灵敏度能量响应，编制了适合裂变中子测量探测系统灵敏度能响的一系列专用程序，研究了相应的实验标定技术，采用理论计算和实验验证相结合的方法，对几套探测系统中子灵敏度能量响应进行了研究，初步解决了标定需要的“单能、脉冲、高强度、多个不同能量的中子源”问题，使不确定度大大提高，满足了测量的要求。     

薄铝埋点等离子体K线光谱半定量诊断

高温等离子体系统中存在等离子体流体力学运动演化过程、离子的离化分布演化动力学过程、高剥离态离子谱发射过程及发射芬光辐射输运过程等，而且高温等离子体系统通常是非平衡系统，所以定量研究高温等离子体系统的发射X光谱和高温等离子体对X光的吸收是一个非常复杂的问题。为了模拟和解释实验测得的激光等离子体发射光谱，提出了一种薄埋点靶：直径为φ200μm厚度为0．1μm的铝点埋在20μm厚的CH膜底衬中，表面再覆盖0．1μm厚CH膜。     

基于面元检测方法的反导战斗部毁伤评估系统

基于计算机技术的战斗部毁伤评估系统不仅能评价战斗部的作战效能，指导战斗部的威力评定和战斗部设计，而且从目标角度，可评价目标的易损性及其生存力以及防护水平，具有很广的应用范围和重要的意义。反导战斗部毁伤评估系统是战术弹道导弹（TBM）、战斗部和交会关系的一个三元系统，根据系统的功能和特点，确定系统的功能模块和数据流，最终确定系统的总体框架见图1。     

振动环境试验设备系统仿真

振动试验系统由振动控制器、功率放大器、振动台、夹具、试件、加速度测量系统等组成。振动试验设备系统包括了除夹具、试件以外的各系统，涉及力学、电子学、计算机测量与控制等多个领域。通过对整个设备系统进行仿真，可以对振动试验开展定量的和数字化的研究，对深入认识振动试验的原理、改进和提高试验质量，具有重要意义。