数字离子阱质谱仪低质量截止值的改进方法

本研究在实验室自制的线形数字离子阱质量分析器上,通过改变数码电源的频率扫描方式,在CID过程中,通过扫描数字束缚方波电源的频率和数字激发方波的频率实现母体解离。例如对于利血平母体离子,当将离子数字束缚方波频率从500 kHz扫描到560 kHz,可以测量到低质荷比的碎片离子,成功实现了串级质谱分析的低质量碎片离子的分析。通过与利血平三重四极质谱串级质谱分析实验结果的比较,发现可以在数字离子阱质谱仪上获得与三重四极质谱相同的串级质谱测量结果。结果表明,本方法可以用于低质量离子的测量,克服了传统离子阱质谱进行串级质谱分析的一个主要难点,显著提高数字离子阱质谱的性能。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.     

Ni/CeO2-SiO2催化剂的制备、表征及其甲烷部分氧化制合成气性能

以硝酸亚铈（Ce（NO₃）₃·6H₂O）和正硅酸四乙酯（C₈H₂₀O₄Si）为前驱体,采用溶胶-凝胶法合成了系列具有大比表面积的xCeO₂-（1-x）SiO₂（x = 0,0.25,0.50,0.75,1）复合氧化物载体,然后浸渍活性组分Ni制得用于甲烷部分氧化制合成气的Ni催化剂。运用N₂物理吸附-脱附、X射线粉末衍射、扫描电镜、紫外-可见漫反射光谱、氢程序升温还原、氨程序升温脱附和热重等手段对所得催化剂的组织结构、还原性、表面酸性和积炭行为等进行了表征;同时考察了催化剂的组成、焙烧温度和反应时间等对催化剂在甲烷部分氧化制合成气中催化性能的影响。表征结果表明,该系列Ni/CeO₂-SiO₂催化剂具有大比表面积,CeO₂晶粒较小,NiO的分散性好且易被还原,表面酸性弱,不容易积炭。当Ce/Si摩尔比为1：1,活性组分Ni的质量分数为10%,焙烧温度为700℃时,所制备的Ni/CeO₂-SiO₂催化剂表现出较好的稳定性、最高的CH₄转化率（~84%）和对产物CO及H₂的选择性（>87%）。     

Parity Alternation of Silicon-doped Ternary Cationic Clusters HC_nSi_2~+(n=1～9)

Systematic study on the electronic/geometrical structures and the parity alternation effect of silicon-doped ternary cationic clusters HCnSi2＋（n = 1 ~9） have been carried out at the coupled cluster level. The ground-state （G-S） isomers of the clusters have been defined. The C, chains of the G-S isomers display polyacetylene-like structures. The even-n cations are more stable than the odd-n ones. Such a trend of even/odd alternation has been elaborated based on concepts of the bond character, atomic charge, incremental binding energy, ionization potential, proton affinity and fragmentation energies of the systems. The findings accord with the relative intensities of HC,,Si2＋ species recorded in the related mass spectrometric experiments.     

Synthesis,Crystal Structure,and Photoluminescence Properties of One Novel D-π-D Type a-Cyanostilbene Derivative

Researches on a-cyanostilbene derivatives demonstrated them to be promising AIE or AIEE structural molecules and potential photoelectric materials. One novel a-cyanostilbene derivative, namely （E）-2-（4-butoxyphenyl）-3-（4-（diethylamino）phenyl）acrylonitrile （BPDPA）, has been designed, synthesized and characterized. The crystalline structure of BPDPA has been studied in detail. The single-crystal X-ray diffraction revealed BPDPA crystallizes in triclinic space group Pi, with a = 12.860（5）, b = 13.327（5）, c = 15.016（5）А, a = 72.650（5）, β = 66.969（5）, Y = 62.897（5）°, Mr = 696.95, V= 2085.6（13） A3, Z = 2, Dc = 1.110 g/cm-3, p = 0.068 mm1, F（000） = 752, Rint = 0.0264, R（I〉 2σ（/）） = 0.0649, wR（l〉 2σ（/） = 0.1724, R（all data） = 0.1321, wR （all data） = 0.2158, completeness to theta = 25.00 is 99.4% and GOF = 1.067. Like most reported a-cyanostilbene derivatives, BPDPA possesses a somewhat twisted molecular structure. UV-Vis and FL measurements showed an obviously bathochromic effect of BPDPA with increasing the polarity of the solvents.     

Opening Band Gap of Graphene by Chemical Doping: a First Principles Study

Single atom chemically doped graphene has been theoretically studied by density functional theory. The largest band gap, 0.62 eV, appears in arsenic atom doped graphene, then 0.60 eV comes by the tin atom, whose deformations can neither be ignored. It is also found that oxygen and iron single atom embedded graphene can open band gap by 0.52 and 0.54 eV, respectively. Moreover, doping O atom shows little distortion and high stability by charge redistribution. The band gap of Fe doped graphene is opened by orbital hybridization. The other heteroatom doped results are a little inferior to them.     

Synthesis and Rheological Investigation ofModel Symmetric 3-Arm Star Polyethylene简

A variety of linear and 3-arm star polyethylene （PE） model polymers covering a wide range of molecular weight are synthesized by the living polymerization of butadiene and the subsequent hydrogenation. Several rheological parameters of these model linear and 3-arm star PE samples are analyzed for detecting the long chain branching （LCB） structure. It is found that the analyses based on zero shear viscosity, vGP plot and flow activation energy are very sensitive to the 3-arm star PEs. The information on the presence of LCB can be obtained with these methods even for low molecular weight samples, which can not be determined by GPC-MALLS. However the information about the LCB structure can not be obtained by the rheological methods alone.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

离子印迹磁固相萃取-石墨炉原子吸收光谱法联用分析环境水样中痕量Ni(Ⅱ)

本文通过乳液聚合法制备磁性离子印迹材料Fe3O4@SiO2@IIM,并运用多种技术手段对其进行了表征。所制备的Fe3O4@SiO2@IIM磁材料颗粒较均一,粒径约为20nm,单分散性好,具有超顺磁性(饱和磁化强度为8.66emu·g-1)。基于此,建立了离子印迹磁固相萃取(IIMSPE)-石墨炉原子吸收光谱法(GFAAS)联用技术分析环境水样中Ni(Ⅱ)的新方法。对影响MSPE的因素进行了详细的考察。在最优实验条件下,方法对Ni(Ⅱ)的检出限为0.015ng·mL-1,相对标准偏差(RSDs)为7.3%(n=7,c=0.1ng·mL-1),富集倍数为24.8,所制备的磁性离子印迹材料不同批次间RSDs为10.9%(n=5,c=0.1ng·mL-1),所合成的材料可以重复使用5次以上。采用该方法分析了标准水样(GSBZ50009-88)中的Ni(Ⅱ)含量,验证方法的准确性,测定值和标准值吻合良好。将该方法应用于东湖水和长江水中Ni(Ⅱ)的测定,加标回收率为90.6%~107.2%。