A Particle-in-cell scheme of the RFQ in the SSC-Linac

A 52 MHz Radio Frequency Quadrupole （RFQ） linear accelerator （linac） is designed to serve as an initial structure for the SSC-Linac system （injector into Separated Sector Cyclotron）.The designed injection and output energy are 3.5 keV/u and 143 keV/u,respectively.The beam dynamics in this RFQ have been studied using a three-dimensional Particle-In-Cell （PIC） code BEAMPATH.Simulation results show that this RFQ structure is characterized by stable values of beam transmission effciency （at least 95%） for both zerocurrent mode and the space charge dominated regime.The beam accelerated in the RFQ has good quality in both transverse and longitudinal directions,and could easily be accepted by Drift Tube Linac （DTL）.The effect of the vane error and that of the space charge on the beam parameters have been studied as well to define the engineering tolerance for RFQ vane machining and alignment.     

CSNS-II双谐波加速研究

The Rapid Cycling Synchrotron （RCS） of the China Spallation Neutron Source （CSNS） complex is designed to provide 1.56×10^13 protons per pulse （ppp） during the initial stage, and it is upgradeable to 3.12× 10^13 ppp during the second stage and 6.24× 10^13 ppp during the ultimate stage. The high beam intensity in the RCS requires alleviation of space charge effects to reduce beam losses, which is key in such high beam power accelerators. With higher intensities in the upgrading phases, a dual-harmonic RF system is planned to produce flat-topped bunches that are useful to reduce the space charge effects. We have studied different schemes to apply the dual-harmonic acceleration in CSNS-Ⅱ, and have calculated the main parameters of the RF svstems, which are presented in this Darter.     

PIC mode simulation of solenoid collimation channel

A new SSC （Separated Sector Cyclotron）-Linac is being designed to serve as an injector for the SSC at the HIRFL （Heavy Ion Research Facility Lanzhou）. The beam intensity at the LEBT （Low Energy Beam Transport） for the heavy ions after the selection is typically low and the space charge effects are inconspicuous. The space charge effects become obvious when the beam current increases to a few hundred microamperes. The emittance growth deriving from the space charge effects may be particularly troublesome for the following linac and cyclotron. An optical system containing three solenoids has been designed for the LEBT to limit the beam emittance and to avoid the unnecessary beam loss in the cyclotron, as well as for the purpose of immunizing the LEBT emittance growth due to the space charge effects. The results of the PIC （Particle- In-Cell） mode simulation illustrate that this channel could limit the beam emittance growth and increase the beam brightness.     

空间电荷效应对X射线条纹相机动态范围影响的研究

在惯性约束聚变中,X射线条纹相机是一种诊断图像时空分辨的重要设备,其动态范围反映了条纹相机有效测量入射X射线强度的能力.由于空间电荷效应的存在,电子脉冲在运动过程中会不断展宽,从而限制了条纹相机的动态范围.本文采用一维流体力学模型,利用电子数守恒、动量守恒和Poisson方程等来对电子脉冲的展宽进行推导,最终得到了电子脉冲的密度分布随时间空间的变化情况,从而为条纹相机动态范围的评估提供了依据.     

聚四氟乙烯和氟化乙丙烯共聚物复合膜的压电性

以多孔PTFE膜为骨架,而以致密（非多孔）FEP膜为储电介质层的孔洞结构复合压电驻极体膜的制备方法.利用正压电效应,测量了复合膜的准静态压电系数d₃₃;研究了压电系数的热稳定性和复合膜中空间电荷的动态特性;并通过介电谐振谱的分析,比较了这类复合膜的准静态和动态压电系数.结果表明：FEP和PTFE复合膜压电驻极体的准静态压电系数d₃₃可以达到300 pC/N.经90℃老化20 h 后的d₃₃仍保持在初 关键词： 压电驻极体 压电性 多孔聚四氟乙烯 致密氟化乙丙烯共聚物     

螺旋线行波管三维频域非线性注波互作用的计算

基于行波管中慢电磁行波的周期传输特性和能流坡印廷定理,考虑高频结构的衰减、切断、螺距的渐变与跳变对互作用的影响,建立了螺旋线行波管三维场论非线性自洽工作方程组.通过傅里叶展式将时域中的电流变换为与频率相关的交流电流分量,采用等离子体粒子模拟的方法,求解离散化的亥姆霍兹方程获得空间电荷场的三维数值解.计算三维电子轨迹,得到精确的互作用后的电子能谱结构,为多级降压收集极的设计提供关键参数.计算结果与电子所Ku波段的测试值比较具有较好的一致性,并分析了互作用后的电子能谱结构,与多级降压收集极的实验基本符合. 关键词： 行波管 非线性注波互作用 空间电荷场 等离子体粒子模拟     

磁绝缘线振荡器中空间电荷的辐射

 研究了磁绝缘线振荡器中空间电荷的辐射。结果包括：导出了线性区的增益公式，所得到的增益函数相对于同步失配是对称的；导出了饱和区的辐射场公式，这个公式表明，饱和辐射功率近似地与谐波电流的平方成正比。这些理论结果部分地由数值模拟证实。     

圆锥磁绝缘传输线的横向空间电荷流

根据电磁场基本理论及电子运动守恒方程，导出圆锥传输线横向空间电荷流的数值模型和磁绝缘临界条件。通过数值计算，讨论了电压及圆锥几何结构参数等对横向空间电荷流和磁绝缘性能的影响。电压较高时,无磁场的空间电荷流较大，而磁绝缘性能更好。在传输线的三个几何参数中，几何因子对传输性能影响最大。     

背景光光伏效应对屏蔽—光伏空间孤子的影响

在光伏晶体两端处加一恒定的直流偏压，背景光的光伏效应对形成屏蔽－光伏孤子的空间电荷场没有影响，但对晶体中的电流有影响。如果外电源的电动势是恒定的，则背景光的光伏效应与外电路的电阻协同起作用，可以通过晶体两端的电压降影响晶体中的空间电荷场，进而影响空间孤子的宽度，在一定的条件下甚至可以实现亮、暗孤子的转换。