倾斜下降管气液两相分层流截面含气率的计算与液层高度的预测

分层流是气液两相流中常见的流动型式，分层流中液层高度是计算的基本数据，由于界面波的存在，对液层的测量和预测都很困难．Ｖｌａｃｈｏｓ提出了预测气液两相分层流液层厚度的关系式，但这一关系式并不适用于倾斜下降管气液两相流．本文提出了计算倾斜下降管气液两相分层流截面含气率的理论模型，在这种模型下得到的截面含气率和实验结果符合良好．在大量实验的基础上，考虑了倾角、管径、气液各相折算速度的影响，根据实验数据提出了预测液层厚度的关系式。     

利用GHZ态实现多原子缠结态的量子隐形传态(英文)

提出一种利用 GHZ态实现多原子缠结态的量子隐形传态方案 .当作为量子通道的 GHZ态含有一个单模高 Q腔时 ,大大地简化了量子稳形传态中的联合测量过程     

基于频域方法的三维物体分层重现

基于频域方法实现了数字记录和再现三维物体离轴全息图.通过频谱对应关系求得各个面的频谱分布,使用数字滤波方法,成功地消除了零级衍射和共轭像;通过改变再现距离,分别获取了三维物体各个截面的再现像.     

基于VAGUE集多准则决策的模糊TOPSIS方法

给出了V AGUE集之间距离的新定义,在此基础上,提出一个基于V AGUE集多准则决策的模糊TOP-S IS方法,它为决策系统提供了一个有用的工具,并通过例子阐明本文方法的有效性.     

A TVD Type Wavelet-Galerkin Method for Hamilton-Jacobi Equations

In this paper,we use Daubechies scaling functions as test functions for the Galerkin method,and discuss Wavelet-Galerkin solutions for the Hamilton-Jacobi equations.It can be proved that the schemesare TVD schemes.Numerical tests indicate that the schemes are suitable for the Hamilton-Jacobi equations.Furthermore,they have high-order accuracy in smooth regions and good resolution of singularities.     

第一届掺杂纳米材料发光性质学术会议

该会议为中国物理学会发光分会、中国稀土学会发光专业委员主办的国内首次纳米材料发光性质专题学术研讨会，旨在通过大会报告、专题研讨等活动，总结、交流近年来掺杂纳米发光材料及其相关应用领域所取得的研究进展和成果。在此基础上凝练科学目标、探讨和规划未来的学科发展方向并集中国内的优势资源攻克难点的科学问题，使我国在该研究领域更具国际竞争力。会议诚邀请该领域知名的专家和学者参加；在探索纳米世界之余，也将带您领略海南美丽而独特的自然景观和人文奇迹。     

Teleportation of an Arbitrary Multipartite GHZ-Class State by One EPR Pair

We present a scheme for perfectly teleporting an arbitrary and unknown N-particle GHZ-class state from a sender to a receiver. We just need one quantum channel composed of two or three particles in the maximally entangled state. The sender performs one Bell-state measurement on two of her particles and N - 1 Hadamard operations and N - 1 yon Neumann measurements on the rest N - 1 particles. The receiver adopts one corresponding unitary transformation on his particles shared with the sender. After that, the receiver can obtain the original N-particle GHZ-class state by introducing N - 1 ancillary particles and carrying out N - 1 controlled-NOT operations. We also generalize the scheme to the case of controlled teleportation.     

Formation of Interfacial Layers in LaAlO3/Silicon during Film Deposition

We have studied the interracial reactions between amorphous LaAlO3 thin films and Si substrates, using high- resolution transmission electron microscopy and x-ray photoelectron spectroscopy. It has been shown that the interracial layer between LaAlO3 film and Si substrate chemical states show that the ratio of La 4d3/2 to Al 2p is SiLaxAlyOz. The depth distributions of La, Si and Al of the interfacial layer remains unchanged with the depth compared to that of the LaAlO3 film. Moreover, the Si content, in the interracial layer gradually decreases with increasing thickness of the interracial layer. These results strongly suggest that the Al element is not deficient in the interracial layer, as previously believed, and the formation of a SiLaxAlyOz interracial layer is mainly due to the diffusion of Si from the substrate during the LaAlO3 film deposition. With the understanding of the interracial layer formation, ones can control the interface characteristics to ensure the desired performances of devices using high-k oxides as gate dielectrics.     

随机环境中多物种分枝随机游动

引进了随机环境中多物种分枝随机游动的一般模型.在分枝过程非灭绝的情况下,讨论了系统的状态分类,得到了系统暂留及强常返的充要条件是存在k个定义在整数集上的函数分别满足某种性质.最后给出了系统强暂留的充分条件.     

精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。