界面分级离子/配位子交换-静电交换的复合模型——离子强度对海水中微量金属-固体粒子相互作用的影响

在实验上首次发现,粘土矿物为固体粒子的体系的E％-pH曲线之离子强度效应是“先右后左摆动现象”;而水合氧化物为固体粒子的体系则是“向左单向移动现象”。对应的等温线之离子强度效应则是“先下后上摆动”和“单向上移”现象,两类四现象一致。为解释上述诸现象,提出液-固界面分级离子/配位子交换-静电交换的复合模型作统一解释和定量处理。由粘土矿物和水合氧化物两类物质的结构可知,前者可发生两类交换作用,彼此消长时曲线位置产生双向摆动;后者只有界面分级离子/配位子交换,故曲线位置单向移动。模型计算结果与实验吻合。     

纳米TiO2的光生电荷迁移特性研究

利用场诱导光电压谱(简称FISPS)和瞬态光伏(简称TPV)技术研究了TiO₂的光生电荷的产生和传输机制.发现光生电荷在体块TiO₂上的迁移机制不同于在纳米TiO₂上的迁移机制，也不同于在结界面空间电荷区的迁移机制. 400 ℃处理的TiO₂颗粒表面具有大量的表面态，光生电荷被表面态捕获-释放机制控制着光伏行为的过程是慢过程. 800 ℃处理的TiO₂已经形成了完整的能带结构，光伏响应除了表现带-带跃迁外,还有一个在带边的自由激子带，光生电荷被表面自建场驱动进行传递的过程是快过程. 600 ℃处理的TiO₂混晶由锐钛矿型和金红石型两种构型组成，在两相之间存在着较低势垒的结界面．它的光伏响应受控于两种机制 ：光生电荷在两相间结界面空间电荷区的传输和在表面自建场驱动下的传输.当激发光强较小时，界面空间电荷区的光生电子由于积累的浓度较小而不能隧穿过结界面，这种场助隧穿只有在外场作用下才能发生.     

提升教学魅力,打造一门好课——《材料表面与界面》教学改革探索

《材料表面与界面》为高分子材料与工程专业复合材料方向的限选课。本课程对于学生奠定学科基础、培养学生对复合材料方向的兴趣具有重要的先导作用。笔者以"提升教学魅力,打造一门好课"为改革目标,充分贯彻了"教学内容是教学魅力的根本,教学方法与教学手段是将教学内容高效转化为教学魅力的催化剂"这一指导思想,从教学内容与教学方式两方面进行改革。从教学反馈看,这些改革措施能够改善教学效果,提高学生学习效率,得到了学生的认可。     

C(2×2)S/Fe(001)吸附体系的SCF-Xa-MS研究

采用SCF-X_α-MS方法, 对于C(2×2)S/Fe(001)吸附体系, 选择Fe_5S和Fe_9S两种原子簇模型, 研究了该吸附体系的电子结构、吸附成键特征及其相互作用图象。结果表明, S吸附于Fe(001)单晶表面具有较强的定域性质, S原子与底物Fe原子之间的吸附相互作用主要表现为S(3p)-Fe(4s,3d)之间的轨道相互作用。通过对表面吸附键长的优化, 其结果与X.S.Zhang等的ARPEFS的实验结果一致。     

Pt/Al2O3蜂窝状催化剂上NO选择性催化还原反应动力学研究

采用多次涂层和浸渍法制备了蜂窝状Pt/Al2O3催化剂，并在高空速和大气体流量条件下对无梯度循环式反应器和积分反应器上催化剂的活性进行了比较。同时采用循环式反应器对动力学数据进行了测定。根据Langmuir-Hinshelwood模型和实验结果，推测了NO-C3H6-O2体系的SCR反应机理，并导出了NO和C3H6反应速率的数学表达式。据此所计算的理论模拟值能够与实验值很好地吻合。实验结果表明，氧气浓度对NO和C3H6的反应速率有明显的影响，二者均随着氧浓度c (O2)的增加达到峰值，再增加氧气浓度时，C3H6的反应速率r(C3H6)保持不变，而NO反应速率r (NO)却下降，而且下降的程度随着温度的升高而加剧。同时，随着氧气浓度增加，r (NO)达到最大值时的温度亦随之下降。     

强冲击加载条件下的钨合金的界面研究

借助定量金相、扫描电子显微镜、透射电子显微镜等微观分析手段对钨质量分数为９３％的钨合金在１５～５０ＧＰａ冲击压力下微观结构响应性态进行了考察，发现了一些钨合金所特有的现象，即钨颗粒与粘结相交界处出现成分迁移，新相析出；并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

锑化镓的光助微刻蚀及其表面氧化物的研究

用电化学和光电化学方法研究锑化镓表面的腐蚀以及锑化镓表面氧化膜的生成和溶解，锑化镓电极在一定电势下生成的氧化膜，用俄歇能谱证明，其主要成分为难溶的氧化锑，此氧化膜的存在抑制了锑化镓的进一步腐蚀，同时亦使锑化镓的半导体光电化学性能大为减弱，通过激光微刻蚀及电子显微镜的观察，在刻蚀剂中添加酒石酸，柠檬酸和氢氟酸等试剂，可使刻蚀形得改善，实验研究了锑化镓的平带电势的测定。     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．