Structural Dependence of Magnetic and Transport Properties in Doped Manganite Perovskites

1 INTRODUCTION In recent years, ABO3-type perovskite-like manganites, RE1xDxMnO3 (RE = rare earth ions, D = Ca2+, Sr2+, Ba2+ etc.), have inspired remarkable attention due to the colossal magnetoresistance (CMR) effects for fundamental and practical consideration [1, 2]. Since A- and B-site substitution can give rise to a large number of derivant compounds, fruitful structural, magnetic and transport properties would be expected in this family. As we have known, the ideal ABO3-typ…     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

均相催化活化杂原子-碳(E-C)键及其与炔烃的加成反应

系统总结了Ni、Pd、Pt、Rh、Cu等过渡金属配合物催化活化Si-C、Sn-C、S-C、Se-C、Cl-C、Br-C等杂原子-碳键及其与炔烃的加成反应.这些新型的炔烃加成反应提供了合成含R3Si、R3Sn、RS、RSe、Cl和Br等活性官能团烯烃化合物的原子经济型一步合成方法.同时加成反应体系具有很高的立体选择性和区域选择性.     

Ce/Zr催化剂上碳颗粒物燃烧行为的研究

考察了CexZr1-xO2 (x=0,0.3,0.5,0.7,1.0)催化剂上碳颗粒物(碳颗粒物)的燃烧行为.结果表明: ZrO2对碳颗粒物燃烧无促进作用.含Ce催化剂能明显降低碳颗粒物的起燃温度.催化剂性能因Ce/Zr不同而不同.当Ce/Zr=5/5时,催化剂的活性最高.在催化剂中添加适量KNO3后,催化活性明显提高,碳颗粒物的起燃温度下降了140 ℃.     

The Isoelectric Point and the Points of Zero Charge of Fe-Al-Mg Hydrotalcite-like Compounds

The relation of the isoelectric point (IEP) and the point of zero net charge (PZNC) of the hydrotalcite-like compounds was discussed. It was found that the IEP does not equal to the PZNC and the IEP is higher than the PZNC. The structural positive charges existing in the HTlc,which cause the difference between the IEP and the PZNC. The effects of the structural positive charges of the HTlc on its IEP and PZNC are the same as the specific adsorption of metal cations.     

Identification of Different Cobalt Nucleation on Glassy Carbon

The nucleation mechanisms of cobalt from sulfate solutions were studied by utilizing the electrochemical technique, chronoamperometry. It was found that the recorded current-time transients introduced from 1.0mol/L CoSO4 solution were complexes with unusual shapes. All characteristic features were identified as separate process. The instantaneous or progressive nucleation with 2D or 3D growth exists during the cobalt deposition, depending on the applied potentials.     

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…