3d过渡金属掺杂M_2@Si_(20)(M=Sc-Zn)团簇的密度泛函理论研究

利用密度泛函理论(DFT)研究3d过渡金属掺杂硅团簇的几何结构和稳定性,计算了绝热电子亲和能和垂直电离能,内嵌双金属间距,自旋磁矩等.结果表明内嵌的Sc、Ti、V、Mn金属二聚体和十二面体硅笼构成了稳定的富勒烯结构,随着d电子数目的增加其内嵌的富勒烯构型有部分畸变,总体而言Si_(20)团簇掺杂双金属后稳定性得到了提高.     

棱镜-漏波导耦合器的理论分析

根据多光束干涉原理,理论上分析了棱镜-漏波导耦合器,且与棱镜-波导耦合器作了比较,给出正确使用这两种耦合器的判据.分析结果表明,在强耦合条件下,棱镜-漏波导耦合器可用于薄膜参数测量和光波导输入-输出耦合;对于弱耦合,本文的结果与Tien和Ulrich的理论一致.     

非均匀波导中的声聚焦

理论研究了声波在非均匀波导中的空间聚焦问题,利用多模态导纳法构建波导内任意位置处声压与入射声压在模态域的映射关系,计算使声波聚焦于空间某位置时的最佳入射波,并画出了相应的聚焦声场.研究了三种非均匀情况:水平变截面波导、含散射体波导以及声速垂直变化波导.结果表明,当输入最佳入射波时,在非均匀波导中可以产生良好的单点或多点声聚焦效果,声波的聚焦过程充分地利用了波导结构及介质非均匀性对声波的散射作用.     

Ka波段螺旋波纹波导回旋行波管

螺旋波纹波导回旋行波管与采用圆波导的回旋行波管相比,有较大的带宽。介绍了它的线性注波互作用理论,并用该理论计算了不同的磁场与波导表面微扰幅度对Ka波段螺旋波纹波导回旋行波管线性增益的影响。计算结果与已报道的实验结果基本符合,说明该理论可以初步确定螺旋波纹波导回旋行波管的各项参数。     

抗弯光纤的理论研究与制造

针对军事上光纤制导等方面的技术要求,从光纤波导的芯层相对折射率差、芯直径、下凹包层等结构参数方面研究了光纤抗弯曲性能,并且研究了光纤内涂层对光纤弯曲性能的影响。通过对光纤弯曲特性的深入研究后,采用PCVD工艺制造了专利技术的抗弯光纤,并测试了相关参数。     

Variational analysis of the disc-loaded waveguide slow-wave structures

The variational method is applied to calculate the dispersion characteristics of disc-loaded waveguide slow-wave structures. The parameters describing the waveguide discontinuities in disc-loaded waveguide are calculated by the variational method. Then the dispersion characteristics of slow-wave structures are obtained using lossless microwave quadrupole theory. Good agreement was observed between results of the variational method and those of field matching method and high frequency structure simulator. In the case of broad band, results of the variational method are better than those of field matching method.     

Proposal of switchable multiwavelength laser with continuously tunable spacing in MgO： APPLN waveguide

A switchable multiwavelength laser with a continuously tunable spacing is proposed and illustrated based on cascaded interactions of the second harmonic and difference-frequency generations in an aperiodically poled MgO-doped lithium niobate (MgO:APPLN) waveguide. The wavelengths and wavelength spacings of the four outputs are continuously varied and controlled by changing the two input pump wavelengths and spacings within a 3-nm flattop bandwidth of MgO:APPLN. In addition, the switchable states of the four outputs can be selected by inputting proper powers of the two pumps. The number of output wavelengths can also be increased by choosing the proper APPLN structure, the total length of MgO:APPLN, and higher powers of input pump lights.     

Initial Processes of Sulfur Adsorption on Si（100） Surface

The adsorption of one monolayer S atoms on ideal Si（100） surface is studied by using the self-consistent tight binding linear muffon-tin orbital method. Energies of adsorption systems ors atoms on different sites are calculated. It is found that the adsorbed S atoms are more favorable on B1 site （bridge site） with a distance 0.131 nm above the Si surface. The .S, Si mixed layer might exist at S/Si（100） interface. The layer projected density of states are calculated and compared with that of the clean surface. The charge transfers are also investigated.     

Transmission Frequency Properties of Elastic Waves along a Hetero-Phononic Crystal Waveguide

We investigate the propagation properties of hetero-phononic crystal waveguides by the improved eigen-mode matching theory, which can be used at same time to calculate both the transmission （reflection） coefficient and band structure. The numerical results show that the transmission frequency range is the same as the common range for two uniform waveguides composing the hereto-system, and the gap of any composite waveguide is also the gap of the hetero-phononic crystals waveguide.     

硅中稀土掺杂层的光致发光研究及其关键问题

利用离子注入技术,对稀土掺杂到半导体单晶硅中的光致发光行为进行了研究。室温下得到了La,Ce和Nd稀土掺杂层的蓝紫色光致发光光谱,并首次观测到硅中稀土掺杂层室温下的光致上转换发光现象。光致发光强度随着稀土掺杂量的增加和热处理温度的上升急剧增强。在紫外光激发下,发光强度随着激发光波长的减小而增大;在光致上转换过程中,发光强度随着激发波长的增加而上升。这表明光致发光强度与稀土元素的掺杂量、掺杂层的结构与热处理温度有密切的关系。文章对在室温下这些稀土掺杂层的光致发光行为进行了分析,并提出了硅中稀土掺杂层光致发光行为研究今后需要重点解决的几个主要问题。