High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

用相位调制方法测量光盘盘基应力双折射的精度分析

偏振相位调制方法是测量微小双折射的一种高精度检测方法。本文系统全面地分析了以ＰＭＣＳＡ结构形式测量光盘盘基应力双折射的相位调制方法中，由各种误差源造成的对测试结果的影响。     

汉折射波片用于发散光束的偏振像差分析

本文利用光线追迹法,对双折射波片用于发散光束的偏振像差进行了分析,并以标准1/4波片为例,给出了小角入射时的近似处理方法.     

介质极化的瞬时相位与振幅

求解电子运动的二阶微分方程，在旋转波近似下，介质在外场突然变化时产生的瞬态感应极化与外场同频，但相位总是落后，最大落后为π/2；振幅大小与初态有关，随时间按指数规律衰减，衰减快慢由介质的阻尼系数决定。     

A Movable-Cavity Cold Atom Space Clock

We present an experimental scheme of a cold atom space clock with a movable cavity. By using a single microwave cavity, we find that the clock has a significant advantage, i.e. the longitudinal cavity phase shift is eliminated. A theoretical analysis has been carried out in terms of the relation between the atomic transition probability and the velocity of the moving cavity by taking into account the velocity distribution of cold atoms. The requirements for the microwave power and its stability for atomic π/2 excitation at different moving velocities of the cavity lead to the determination of the proper working parameters of the rubidium clock in frequency accuracy 10^-17. Finally, the mechanical stability for the scheme is analysed and the ways of solving the possible mechanical instability of the device are proposed.     

相位测距分系统结构设计

简要概述介绍红外相位测距系统的工作原理．相位测距机在电子光学系统中的应用及相位测距分系统的方案确定与结构设计方法．对共轴光学系统中干扰产生的原因进行了分析，并提出消除干扰的方法。     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

第二届物理奖简介

 第二届“胡刚复、饶毓泰、叶企孙、吴有训物理奖”评审结果,共有4个项目7名同志光荣获奖.他们是:一 胡刚复物理奖(实验技术)获奖项目:高功率激光物理实验技术的发展获奖人:林尊琪主要贡献:在激光等离子体相互作用和球靶内爆动力学基础研究方面做了大量实验物理技术发展工作,包括:成功建立了国内适用于激光等离子体基础研究的七项先进配套诊断系统,其中多分幅X光背景照明诊断设备是国际首创,为相关联地研究激光内爆球靶两维动力学过程提供了重要技术基础.