CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

聚苯乙炔LB多层膜及其光电导性能的研究

制备了聚苯乙炔（ＰＰＡ）ＬＢ多层膜，将其作为电荷产生层首次应用于机能分离型光电导体领域．从π Ａ曲线发现，ＰＰＡ单分子膜具有表面压力的各向异性和松弛特性．ＴＥＭ照片显示，ＰＰＡ分子链在ＬＢ膜中有序排列．转移比和ＸＰＳ的研究表明，复合膜沉积均匀．与ＰＰＡ涂膜相比，以ＰＰＡ ＬＢ多层膜作为电荷产生层的光电导体表面充电电位Ｖ０＝１３４５Ｖ，光照１ｓ后的光衰百分比ΔＶ１ｓ＝６５０５％，半衰时间ｔ１／２＝０５８ｓ，具有更优异的光电导性能．     

光催化降解染料ZnO催化剂的性能

光催化法是20世纪70年代发展起来的新型水处理技术，即以某些半导体材料为催化剂，利用光催化法来降解环境污染物。该方法工艺简单，成本较低，在常温下能使大多数不能或难于生物降解的有毒有机物彻底氧化分解。近年来研究最多的是TiO2，由于其带隙较宽(3．2eV)，只能吸收波长λ≤387nm的紫外光，因此研制新型光催化剂仍是重要课题。     

Polyethylenimine （PEI）-g-comb-poly（ethylene glycol）-transferrin（Ⅰ）： Tumor-targeted Vector for Gene Delivery In.vitro

The work described the synthesis and evaluation of PEI-g-comb-PEG-transferrin as a potential system for gene therapy in vitro. The MW of PEG was 10KDa, and PEI was 2KDa. Its structure was identified by NMR, FT-IR and TGA spectroscopy. MTT assay found that at concentration up to 4000 n mol/L of the polymer, cell viability was over 85%. The bio-character of polymer/DNA complex was characterized by agarose gel electrophoresis, ethidium bromide exclusion and zeta-potential assay. The polymer could retardate DNA at N/P ratio 3.0-3.5 （mol/mol）. The particle size of the polymer/DNA complex was less than 300 nm. Transfection efficiency of the complex was studied in COS7 and NT2 cell lines.     

7—羟基4—甲基香豆素的倍频性能研究

７－羟基－４－甲基香豆素的倍频性能研究周为群（苏州大学生物技术学院苏州２１５１５１）曹阳（苏州大学化学化工学院苏州２１５００６）关键词二阶极化率７－羟基－４－甲基香豆素ＳＨＧ效应倍频材料中图分类号Ｏ７３４．１从七十年代至今，人们对探究有机倍频材料已作...     

An Efficient Deselenenylation Reaction to the Synthesis of 3, 5-Disubstituted Isoxazoline and Isoxazole

The development of organoselenium chemistry1 has been expanding rapidly during the last decades. Among them, organic selenides are key intermediates, for that they can be efficiently introduced, manipulated, and removed through selenoxide syn-elimination2. Our research group3 has been interested in the application of selenium in organic synthesis for several years. Isoxazolinyl substituted phenyl selenide 13a, although a β-H exists in the molecule, did not undergo selenoxide syn-elimination e…     

YbB6的能带结构和光电导率谱的解析

用密度泛函（GGA＋U）方法研究YbB6晶体的电子结构。采用FLAPW方法进行计算,获得了比较精确的能带结构信息。分析了YbB6能带结构的特征与Yb-B6簇间成键情况的联系。在此基础上计算YbB6的反射率、介电函数、光电导率和能量损失函数等光学常数,结果与实验值符合比较好。对其光电导率（实部）和能量损失函数谱进行详细分析,对谱峰作出指认,阐明了各谱峰与能带间电子跃迁的联系,证实了前人对谱峰所作经验指认的合理部分,补充和纠正了前人经验指认的不足和不准确之处。     

多嵌段聚醚氨酯脲为基质的新型高分子固态离子导体

本文合成了一系列聚乙二醇型多嵌段聚醚氨酯脲，而且用这类聚醚氨酯甩与高氯酸锂制得了一种新型的高分子固态离子导体复合物。在室温和50℃之间，其电导率比聚环氧乙烷为基质的固体电解质的高一到二个数量级，它还具有优良的综合性能。因此，对于室温薄膜蓄电池来说，这种新型的固体电解质是一类良好的候选材料。     

氮化硅在超声波辐照下的水解

氮化硅(Si3N4)是近三四十年发展起来的一种新型陶瓷材料,应用广泛[1-3],化学性质特别稳定,一般情况下难以发生反应,鲜有人研究其化学性质。有研究[3]指出氮化硅在磨擦条件下能与水发生如下反应:Si3N4+6H2O→3SiO2+4NH3,但却无人专门定量地研究过氮化硅在水溶液中的反应性能,为此本文研究了氮化硅在超声波辐照条件下的水解情况,并且还和强力搅拌条件下的结果进行了对比。1　实验部分1 1　主要仪器与试剂超声波清洗器(KQ-218型,KQ-250B型,CX-250型,CK-25-06型)BF-101B型磁力搅拌器,72型分光光度计,氮化硅(>99 9%,α Si3N4>95%)…     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.